Tape and Reel Options for T-13/4 (5 mm), T-1 (3 mm), LED Lamps Technical Data Option 01 Option 02 Features Ordering Information * Compatible with Radial Lead Automatic Insertion Equipment * Meets Dimensional Specifications of IEC Publication 286 and ANSI/EIA Standard RS-468 for Tape and Reel * Reel Packaging Simplifies Handling and Testing * T-1 and T-1 3/4 LED Lamps Available Packaged on Tape and Reel * 5 mm (0.197 inch) Formed Lead and 2.54 mm (0.100 inch) Straight Lead Spacing Available To order LED lamps packaged on tape and reel, include the appropriate option code along with the device catalog part number. Example: to order the HLMP-3300 on tape and reel with formed leads (5 mm lead spacing) order as follows: HLMP-3300 Option 01. Minimum order quantities vary by part number. Orders must be placed in reel increments. Please contact your local Agilent sales office or franchised Agilent distributor for a complete list of lamps available on tape and reel. Description LED lamps with 0.46 mm (0.018 inch) square leads with 5 mm (0.197 inch) lead spacing are recommended for use with automatic insertion equipment. T-1 and T-13/4 LED lamps are available on tape and reel as specified by the IEC Publication 286 and ANSI/EIA Standard RS-468. The Option 01 lamp devices have formed leads with 5 mm (0.197 inch) spacing for automatic insertion into PC boards by radial lead insertion equipment. The Option 02 lamp devices have straight leads with 2.54 mm (0.100 inch) spacing, packaged on tape and reel for ease of handling. T-1 lamps are packaged 1800/reel. T-13/4 lamps are packaged 1300/reel. Caution: Agilent does not recommend T-1 package, option 02 LEDs for auto-insertion. The force exerted on the LED lead frame during the cut and clinch operation of auto-insertion may result in cracking of the lamp epoxy dome which results in catastrophic failure. It is suggested that insertion machine compatibility be confirmed. Device Selection Guide Option Description 01 Tape and reel, 5 mm (0.197 inch) formed leads. 02 Tape and reel, 2.54 mm (0.100 inch) straight leads. Package Quantity/Reel Order Increments T-1 1800 1800 T-13/4 1300 1300 2 Absolute Maximum Ratings and Electrical/ Optical Characteristics The absolute maximum ratings, mechanical dimension tolerances and electrical/optical characteristics for lamps packaged on tape and reel are identical to the basic catalog device. Refer to the basic data sheet for the specified values. Notes: 1. Minimum leader length at either end of tape is 3 blank part spaces. 2. Silver saver paper is used as the interlayer for silver plated lead devices. 3. The maximum number of consecutive missing lamps is 3. 4. In accordance with EIA and IEC specs, the anode lead leaves the reel first. 5. Drawings apply to devices with 0.46 mm (0.018 inch) square leads only. Contact Agilent Sales Office for dimensions of 0.635 mm (0.025 inch) square lead devices. Tape and Reel LED Configurations Figure 1. T-1 High Profile Lamps, Option 01. Figure 2. T-1 High Profile Lamps, Option 02. Figure 3. T-1 Low Profile Lamps, Option 01. Figure 4. T-1 Low Profile Lamps, Option 02. 3 Tape and Reel LED Configurations (cont.) Figure 5. T-13/ 4 High Profile Lamps, Option 01. Figure 6. T-13/ 4 High Profile Lamps, Option 02. Figure 7. T-13/ 4 Low Profile Lamps, Option 01. Figure 8. T-13/ 4 Low Profile Lamps, Option 02. 4 Dimensional Specifications for Tape and Reel Item Option 01 02 Symbol Specification Notes T1 High Profile Body Height A1 4.70 (0.185) 4.19 (0.165) Body Diameter D1 3.18 (0.125) 2.67 (0.105) Component Height H1 25.7 (1.012) Max. Tl Low Profile Body Height A2 3.73 (0.147) 3.23 (0.127) Body Diameter D2 3.05 (0.120) 2.79 (0.110) Component Height H2 24.7 (0.974) Max. T13 /4 High Profile Body Height A3 9.19 (0.362) 8.43 (0.332) Body Diameter D3 5.08 (0.200) 4.32 (0.170) Component Height H3 30.2 (1.189) Max. T13 /4 Low Profile Body Height A4 6.35 (0.250) 5.33 (0.210) Body Diameter D4 5.08 (0.200) 4.32 (0.170) Component Height H4 27.4 (1.079) Max. Lead Wire Thickness d 0.45 (0.018) Pitch of Component P 13.7 (0.539) 11.7 (0.461) Feed Hole Pitch P0 12.9 (0.508) 12.5 (0.492) Cumulative error: 1.0 mm/20 pitches Feed Hole Center to Lead Center P1 4.55 (0.179) 3.15 (0.124) Measure at crimp bottom 5.78/3.68 (0.227/0.1448) for straight leads Hole Center to Component Center P2 7.35 (0.289) 5.35 (0.211) Lead to Lead Distance F 5.40 (0.213) 4.90 (0.193) Component Alignment, Front-rear h 0 1.0 (0.039) Tape Width W 18.5 (0.728) 17.5 (0.689) Hold Down Tape Width W0 15.3 (0.602) 12.0 (0.472) Hole Position W1 9.75 (0.384) 8.50 (0.335) Square Leads 2.54 (0.100) nominal for straight leads Figure 9 5 Dimensional Specifications for Tape and Reel (cont.) Item Option 01 02 Symbol Specification W2 2.54 (0.100) Max. Height of Component from Hole Center H 21.0 (0.827) 20.0 (0.787) Lead Clinch Height HO 16.5 (0.650) 15.5 (0.610) Feed Hole Diameter DO 4.20 (0.165) 3.80 (0.150) Total Tape Thickness t 0.90 (0.035) 0.50 (0.020) Length of Snipped Lead L 11.0 (0.433) Max. Lead Length Under Hold Down Tape I1 14.5 (0.571) Min. Hold Down Tape Position Note: 1. Dimensions in millimetres (inches) maximum/minimum. Figure 9. Front to Rear Alignment and Tape Thickness, Typical All Device Types. Figure 10. Device Retention Tests and Specifications. Figure 11. Reel Configuration and Labeling. Notes Paper thickness: 0.55 (0.022) 0.45 (0.018) Figure 9 www.semiconductor.agilent.com Data subject to change. Copyright (c) 1999 Agilent Technologies, Inc. Obsoletes 5964-9375E (4/96) 5968-4164E (11/99)