130 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
2648283723 III
5015
26500 Pyle
Printed
Circuit Board
EMI Filter
Transient
Fiber Optics
Options
Others Matrix 2
Matrix Pyle
Crimp Rear
Release Matrix I II III
High Speed
Contacts SJT
MIL-DTL-83723, Series III, Matrix®
How to Order – Threaded Coupling Connectors
Step 1. Military Connector Type
1. 2. 3. 4. 5.
MIL-DTL-83723,
Series III
Connector
Type
Connector Style
(Threaded) and
Contact Type)
Service
Class
Shell Size/
Insert
Arrangement
Alternate Keying Position
of Shell or
Alternate Rotation of Insert
MILITARY M83723 /84 R 0803 N
M83723 Designates MIL-DTL-83723
Series III Connectors
Step 2. Select a Connector Style
Designates
/82 Wall Mount Receptacle with Socket Contacts
/83 Wall Mount Receptacle with Pin Contacts
/84 Jam Nut Receptacle with Socket Contacts
/85 Jam Nut Receptacle with Pin Contacts
/86 Standard Straight Plug with Socket Contacts
/87 Standard Straight Plug with Pin Contacts
/91 Straight Plug with RFI grounding, Socket Contacts
/92 Straight Plug with RFI grounding, Pin Contacts
/95 Straight Plug with Self-Locking Clutch Plate, Socket Contacts
/96 Straight Plug with Self-Locking Clutch Plate, Pin Contacts
Step 3. Select a Service Class
Designates
AAluminum shell, black non-conductive anodize finish, fluid resis-
tant insert
RAluminum shell, electroless nickel finish, fluid resistant insert
GStainless steel shell, passivated, fluid resistant insert
WAluminum shell, olive drab cadmium plated, fluid resistant insert
Step 4. Select a Shell Size & Insert
Arrangement from chart on pg. 124.
Shell Size & Insert Arrangements are on page 124. First
number represents Shell Size, second number is the Insert
Arrangement. (Note that shell size 28 is not an MS connector,
and should be ordered by commercial number.)
Step 5. Select an Alternate Keying Position -
Rotation of master key/keyway of shell.
Step 1. Commercial Connector Type
MT Designates Amphenol®/Matrix®
Threaded Coupling Connector
Step 2. Select a Connector Style
Designates
30 Wall Mount Receptacle
34 Jam Mount Receptacle
36 Standard Straight Plug
38 Straight Plug with RFI grounding ngers
37 Straight Plug with Self-Locking Clutch Plate
Step 3. Select a Service Class
Designates
AAluminum shell, black non-conductive anodize finish,
fluid resistant insert
RAluminum shell, electroless nickel finish, fluid resistant
insert
GStainless steel shell, passivated, fluid resistant insert
WAluminum shell, cadmium olive drab finish,
corrosion resistant, fluid resistant insert
Step 4. Select a Shell Size & Insert
Arrangement from chart on pg. 124.
Shell Size & Insert Arrangements are on page 124. First
number represents Shell Size, second number is the
Insert Arrangement.
Step 5. Select a Contact Type
Designates
PPin Contacts
SSocket Contacts
Step 7. Modication Number
Consult Amphenol Aerospace for information.
or Step 5. Select an Alternate Rotation of Insert.
Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying
positions. See page 124 for descriptions.
Use N for Normal. Use 1, 2, 3, 4, or 5 for alternate rotation of
insert. See page 124 for descriptions.
See additional classes of MIL-DTL-83723, Series III which are
available in the Amphenol/Pyle versions: Classes K, S, N - rewall,
high temperature (200°C – 260°C) and Classes H and Y - hermetics.
These are covered in the 83723 Pyle section of this catalog.
Step 6. Select an Alternate Keying Position -
Rotation of master key/keyway of shell.
or Step 6. Select an Alternate Rotation of Insert.
Use 6, 7, 8, 9 or Y for alternate keying positions. No letter
required for normal (No rotation position). See page 124
for descriptions.
Use 1, 2, 3, 4, or 5 for alternate rotation of insert.
No letter required for normal (No rotation position)
See page 124 for descriptions.
1. 2. 3. 4. 5. 6. 7.
Amphenol®/Matrix®
MIL-DTL-83723,
Series III
Connector
Type
(Threaded)
Connector
Style
Service
Class
Shell Size/
Insert
Arrangement
Contact
Type
Alternate Keying Position
of Shell or
Alternate Rotation of Insert
Modification
Number
COMMERCIAL MT 34 R 0803 P 7 XXX
For ordering information on accessories, such as protection caps and
backshell hardware, contact Amphenol Aerospace, Sidney, NY.
(Refer to military specication slash sheet number).
See additional classes of MIL-DTL-83723, Series III which are available in the
Amphenol/Pyle versions: Classes K, S, N - rewall, high temperature (200°C
– 260°C) and Classes H and Y - hermetics. These are covered in the 83723
Pyle section of this catalog.