2P-01YN143 - 2-Power - Datasheet.Support

1PS9069 08/03/09

Features

• 2 Differential Channel, 2:1 Mux/DeMux

• PCI Express® 2.0 Performance, 5.0Gbps

• Pinout optimized for placement between two PCIe slots

• Bi-directional operation

• Low Bit-to-Bit Skew, 5ps max

• Low Crosstalk: -26dB@5 GHz

• Low Off Isolation: -20dB@5 GHz

• VDD Operating Range: +3.3V

• ESD Tolerance: 2kV HBM

• Packaging (Pb-free & Green):

– 28 contact TQFN (ZH)

Description

Pericom Semiconductor’s PI3PCIE2215 is a 4 to 2 differential chan-

nel multiplexer/demultiplexer switch. The PI3PCIE family of switch

solutions is fully compliant with PCIe® signals at 5.0Gbps. Due to

its low bit-to-bit skew, high channel-to-channel noise isolation and

high bandwidth, this product is ideal for PCI Express switching.

Application

Switch a PCI Express® lane output between two PCI Express lane

inputs

Block Diagram Pin Description (Top-side view)

PI3PCIE2215

3.3V, PCI Express® 1-lane,

2:1 Mux/DeMux Switch

BI-

BI+

AI-

AI+ AOa-

AOa+

AOb-

AOb+

BOa-

BOa+

BOb-

BOb+

SEL

Truth TableFunction SEL

xIy to xOay L

xIy to xOby H

AI+

AI-

AOb+

AOb-

GND

AOa+

AOa-

GND

VDD

BOa+

BOa-

SEL

GND

VDD

GND

VDD

GND

VDD

GND

28 27 26 25

11 12 13 14

GND

BI+

BI-

BOb+

BOb-

VDD

09-0033

PI3PCIE2215

3.3V, PCI Express®, 1-Lane,

2:1 Mux/DeMux Switch

PS9069 08/03/09

Signal Descriptions

Pin Number Pin Name Type Description

AI+

AI-

Differential input Differential input pair from PCIE signal source. Signal is

passed through to the AOa+, AOa- pin respectively when

SEL=0. Signal is passed through to the AOb+, AOb- pin

respectively when SEL = 1.

AOa+

AOa-

Differential pass-through

input

Differential analog pass-through output. Signal from AI+

and AI- is passed through AOa+ and AOa- respectively

when SEL=0.

AOb+

AOb-

Differential pass-through

input

Differential analog pass-through output. Signal from AI+

and AI- is passed through AOa+ and AOa- respectively

when SEL=1.

BI+

BI-

Differential input Differential input pair from PCIE signal source. Signal is

passed through to the BOa+, BOa- pin respectively when

SEL=0. Signal is passed through to the BOb+, BOb- pin

respectively when SEL = 1.

BOa+

BOa-

Differential pass-through

input

Differential analog pass-through output. Signal from BI+

and BI- is passed through BOa+ and BOa- respectively

when SEL=0.

BOb+

BOb-

Differential pass-through

input

Differential analog pass-through output. Signal from BI+

and BI- is passed through BOb+ and BOb- respectively

when SEL=1.

11, 13, 15, 21, 24,

26, 28,

(center pad)

GND Ground input Ground

10 NC - No Connect - Reserved, do not connect

16 SEL 3.6V tolerant low-voltage

single-ended input

SEL controls the mux through a ﬂ ow-through latch.

9, 12, 14, 17, 20,

25, 27

VDD Power supply Power, 3.3V ±10%

09-0033

PI3PCIE2215

3.3V, PCI Express®, 1-Lane,

2:1 Mux/DeMux Switch

PS9069 08/03/09

Recommended Operating Conditions

Symbol Parameter Conditions Min Typ Max Units

VDD 3.3V Power Supply 3.0 3.3 3.6 V

IDD Total current from VDD

3.3V supply

0 2.5 mA

TCASE Case temperature range

for operation within spec.

-40 85 Celsius

Electrical Characteristics

Storage Temperature ....................................................–65°C to +150°C

Supply Voltage to Ground Potential ................................–0.5V to +4.6V

DC Input Voltage .............................................................. –0.5V to VDD

DC Output Current ....................................................................... 120mA

Power Dissipation ........................................................................... 0.5W

Note: Stresses greater than those listed under MAX I MUM

RAT INGS may cause permanent damage to the de vice. This

is a stress rating only and func tion al op er a tion of the device

at these or any other conditions above those indicated in the

operational sections of this spec i ﬁ ca tion is not implied. Expo-

sure to absolute max i mum rating con di tions for extended

periods may affect re li abil i ty.

Maximum Ratings

(Above which useful life may be impaired. For user guide lines, not tested.)

DC Electrical Characteristics (TA = –40°C to +85°C, VDD = 3.3V ± 10%)

Parameter Description Test Conditions Min Typ(1) Max Units

VIH-SEL(2) Input high level, SEL input 2.0 3.6 V

VIL-SEL(2) Input Low Level, SEL

input

0 0.8 V

IIN_SEL(2) Input Leakage Current,

SEL input

Measured with input at VIH-SEL max and

VIL-SEL min

–10 10 μA

RON On Resistance VDD = Min., VIN = 1.3V, IIN = 40mA 12 Ohm

CON On Channel Capacitance VIN = 0, VDD = 3.3V 2.0 pF

Note:

1. Typical values are at VDD = 3.3V, TA = 25°C ambient and maximum loading.

Dynamic Electrical Characteristics for xI±, xOy±

Parameter Description Test Conditions Min. Typ.(1) Max. Units

DDIL Differential Insertion Loss

f=1.2GHz

f=2.5GHz

f=5.0GHz

f=7.5GHz

-1.5

-2.0

-5.0

-9.0

DDILOFF Differential Off Isolation f= 0 to 3.0GHz -20.0

DDRL Differential Return Loss

f= 0 to 2.8GHz

f= 2.8 to 5.0GHz

f= 5.0 to 7.5GHz

-14.0

-8.0

-4.0

DDNEXT Near End Crosstalk

f= 0 to 2.5GHz

f= 2.5 to 5.0GHz

f= 5.0 to 7.5GHz

-32.0

-26.0

-20.0

09-0033

PI3PCIE2215

3.3V, PCI Express®, 1-Lane,

2:1 Mux/DeMux Switch

PS9069 08/03/09

Switching Characteristics (TA= -40º to +85ºC, VDD = 3.3V±10%)

Parameter Description Test Conditions Min. Typ. Max. Units

tPZH, tPZL Line Enable Time - SEL to xI+/-, xOy+/- See "Test Circuit for

Electrical Characteristics" 0.5 12.0 ns

tPHZ, tPLZ Line Disable Time - SEL to xI+/-, xOy+/- See "Test Circuit for

Electrical Characteristics" 0.5 12.0 ns

tb-b Bit-to-bit skew within the same differential

pair

See "Test Circuit for

Electrical Characteristics" 7ps

tch-ch Channel-to-channel skew See "Test Circuit for

Electrical Characteristics" 35 ps

5.0 Gbps Receive Eye Mask (-3.5dB)

09-0033

PI3PCIE2215

3.3V, PCI Express®, 1-Lane,

2:1 Mux/DeMux Switch

PS9069 08/03/09

Differential Insertion Loss

Differential Return Loss

09-0033

PI3PCIE2215

3.3V, PCI Express®, 1-Lane,

2:1 Mux/DeMux Switch

PS9069 08/03/09

Differential Off Isolation

Differential Crosstalk

09-0033

PI3PCIE2215

3.3V, PCI Express®, 1-Lane,

2:1 Mux/DeMux Switch

PS9069 08/03/09

Test Circuit

09-0033

PI3PCIE2215

3.3V, PCI Express®, 1-Lane,

2:1 Mux/DeMux Switch

PS9069 08/03/09

Switch Positions

Test Switch

tPLZ, tPZL 2 x VDD

tPHZ, tPZH GND

Prop Delay Open

Switching Waveforms

Voltage Waveforms Enable and Disable Times

tPLZ

VDD/2 VDD/2

VDD

VOH

VOL

VDD/2

tPHZ

tPZL

tPZH

Output 1

Output 2

VOL

VOH

SEL

VOL + 0.15V

VOH – 0.15V

4pF

OUT

200-ohm

2 x V

Pulse

Generator D.U.T

Test Circuit for Electrical Characteristics(1-5)

Notes:

1. CL = Load capacitance: includes jig and probe capacitance.

2. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator

3. Output 1 is for an output with internal conditions such that the output is low except when disabled by the output control.

output 2 is for an output with internal conditions such that the output is high except when disabled by the output control.

4. All input impulses are supplied by generators having the following characteristics: PRR ≤ MHz, ZO = 50Ω, tR ≤ 2.5ns, tF ≤ 2.5ns.

5. The outputs are measured one at a time with one transition per measurement.

09-0033

PI3PCIE2215

3.3V, PCI Express®, 1-Lane,

2:1 Mux/DeMux Switch

PS9069 08/03/09

Differential Inputs/Output Characteristics for Gen2 speeds

Symbol Parameter Min Nom Max Units Comments

Tbit Unit Interval 199.94 200.00 200.06 ps Deﬁ ned by Gen2 spec.

VRX-Diffp-p Differential Input Peak

to Peak Voltage

TBD 1.200 V VRX-DIFFp-p = 2*|VRX-

D+ - VRX-D-|. Applies to

IN_S and RX_IN signals.

TRX-EYE Minimum Eye Width at

IN_D input pair.

TBD Tbit

VCM-AC-pp AC Peak Common-

Mode Input Voltage

100 mV VCM-AC-pp = |VRX-D+

+ VRX-D-|/2 - VRX-CM-

DC.

VRX-CM-DC = DC(avg)

of |VRX-D++VRX-D-|/2

VCM-AC-pp includes all

frequencies above 30kHz.

ZRX-DIFF-DC DC Differential Input

Impedance

80 100 120  Rx DC Differential Mode

impedance

ZRX-DC DC Input Impedance 40 50 60 Required IN_D+ as well

as IN_D- DC impedance

(50 +/- 20% tolerance).

Includes mux resistance.

VRX-Bias Rx input termination

voltage

0 2.0 V Intended to limit power-

up stress on PCIE output

buffers.

Applications Information

09-0033

PI3PCIE2215

3.3V, PCI Express®, 1-Lane,

2:1 Mux/DeMux Switch

PS9069 08/03/09

Package Mechanical: 28-Contact TQFN (ZH)

Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com

Ordering Information

Ordering Code Package Code Package Type

PI3PCIE2215ZHE ZH Pb-free & Green, 28-Contact TQFN

Notes:

• Thermal characteristics can be found on the company web site at www.pericom.com/packaging/

• "E" denotes Pb-free and Green

• Adding an "X" at the end of the ordering code denotes tape and reel packaging

DESCRIPTION: 28-Contact, Very Thin Quad Flat No-Lead, TQFN

PACKAGE CODE: ZH28

DOCUMENT CONTROL #: PD-2034 REVISION: B

DATE: 01/26/09

09-0066

09-0033