TL022C, TL022M
DUAL LOW-POWER OPERATIONAL AMPLIFIERS
SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Very Low Power Consumption
D
Power Dissipation With ±2-V Supplies
170 µW Typ
D
Low Input Bias and Offset Currents
D
Output Short-Circuit Protection
D
Low Input Offset Voltage
D
Internal Frequency Compensation
D
Latch-Up-Free Operation
D
Popular Dual Operational Amplifier Pinout
TL022M IS NOT RECOMMENDED FOR
NEW DESIGNS
description
The TL022 is a dual low-power operational
amplifier designed to replace higher power
devices in many applications without sacrificing
system performance. High input impedance, low
supply currents, and low equivalent input noise
voltage over a wide range of operating supply
voltages result in an extremely versatile
operational amplifier for use in a variety of analog
applications including battery-operated circuits.
Internal frequency compensation, absence of
latch-up, high slew rate, and output short-circuit
protection assure ease of use.
The TL022C is characterized for operation from 0°C to 70°C. The TL022M is characterized for operation over
the full military temperature range of –55°C to 125°C.
AVAILABLE OPTIONS
VIOmax
PACKAGE
TA
V
IO
max
AT 25
°
C
SMALL OUTLINE CERAMIC DIP PLASTIC DIP CERAMIC FLAT PACK
AT
25 C
(D) (JG) (P)
CERAMIC
FLAT
PACK
(U)
0°C to 70°C5 mV TL022CD — TL022CP —
–55°C to 125°C5 mV — TL022MJG — TL022MU
The D package is available taped and reeled. Add the suffix R to the device type (i.e. TL022CDR).
Copyright 1990, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
symbol (each amplifier)
1
2
3
4
8
7
6
5
1OUT
1IN–
1IN+
GND
VCC
2OUT
2IN–
2IN+
TL022M ...JG PACKAGE
TL022C ...D OR P PACKAGE
(TOP VIEW)
1
2
3
4
5
10
9
8
7
6
NC
1OUT
1IN–
1IN+
VCC –
NC
VCC+
2OUT
2IN–
2IN+
TL022M ...U PACKAGE
(TOP VIEW)
–
+
IN+ OUT
IN–
TL022C, TL022M
DUAL LOW-POWER OPERATIONAL AMPLIFIERS
SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
schematic
Each Amplifier Common to Both
Amplifiers VCC+
To Other
Amplifier
To Other Amplifier
VCC–
IN–
IN+
OUT
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
TL022C TL022M UNIT
Supply voltage, VCC+ (see Note 1) 18 22 V
Supply voltage, VCC– (see Note 1) –18 –22 V
Differential input voltage (see Note 2) ±30 ±30 V
Input voltage (any input, see Notes 1 and 3) ±15 ±15 V
Duration of output short circuit (see Note 4) unlimited unlimited
Continuous total dissipation See Dissipation Rating Table
Operating free-air temperature range 0 to 70 –55 to 125 °C
Storage temperature range –65 to 150 –65 to 150 °C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds JG or U package 300 °C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or P package 260 °C
NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC–.
2. Differential voltages are at IN+ with respect to IN–.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output may be shorted to ground or either power supply . For the TL022M only , the unlimited duration of the short circuit applies
at (or below) 125°C case temperature or 75°C free-air temperature.
DISSIPATION RATING TABLE
PACKAGE TA ≤ 25°C
POWER RATING DERATING
FACTOR DERATE
ABOVE TATA = 70°C
POWER RATING TA = 125°C
POWER RATING
D680 mW 5.8 mW/°C 33°C 464 mW —
JG 680 mW 8.4 mW/°C69°C 672 mW 210 mW
P 680 mW 8.0 mW/°C65°C 640 mW —
U 675 mW 5.4 mW/°C 25°C 432 mW 135 mW
TL022C, TL022M
DUAL LOW-POWER OPERATIONAL AMPLIFIERS
SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended operating conditions
MIN MAX UNIT
Supply voltage, VCC+ 515 V
Supply voltage, VCC– –5 –15 V
electrical characteristics at specified free-air temperature, VCC± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS†
TL022C TL022M
UNIT
PARAMETER
TEST
CONDITIONS†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
V
O
= 0, 25°C 1 5 1 5
mV
V
IO
Inp
u
t
offset
v
oltage
O,
RS = 50 ΩFull range 7.5 6
mV
IIO
In
p
ut offset current
VO=0
25°C 15 80 5 40
nA
I
IO
Inp
u
t
offset
c
u
rrent
V
O =
0
Full range 200 100
nA
IIB
In
p
ut bias current
VO=0
25°C 100 250 50 100
nA
I
IB
Inp
u
t
bias
c
u
rrent
V
O =
0
Full range 400 250
nA
VICR
Common-mode input 25°C±12 ±13 ±12 ±13
V
V
ICR voltage range Full range ±12 ±12
V
VO(PP)
Maximum peak-to-peak RL = 10 kΩ25°C 20 26 20 26
V
V
O(PP) output voltage swing RL ≥ 10 kΩFull range 20 20
V
AVD
Large-signal differehtial R
L
≥ 10 kΩ, 25°C 60 80 72 86
dB
A
VD
gg
voltage amplification
L,
VO = ±10 V Full range 60 66
dB
B1Unity-gain bandwidth 25°C 0.5 0.5 MHz
CMRR
Common-mode rejection V
IC
= V
ICR
min, 25°C 60 72 60 72
dB
CMRR
j
ratio
IC ICR ,
RS = 50 ΩFull range 60 60
dB
kSVS
Supply voltage sensitivity V
CC
= ±9 V to ±15 V, 25°C 30 200 30 150
µV/V
k
SVS
yg y
(∆VIO/∆VCC)
CC ,
RS = 50 ΩFull range 200 150 µ
V/V
Eilti t i
VnEquivalent input noise
voltage
AVD = 20 dB,
f = 1 kHz 25°C50 50 nV/Hz
voltage
,
IOS Short-circuit output current 25°C±6±6 mA
ICC
Supply current (both
No load
25°C 130 250 130 250
µA
I
CC
y(
amplifiers)
O =
,
No
load
Full range 250 250 µ
A
PD
Total dissipation
No load
25°C 3.9 7.5 3.9 6
mW
P
D(both amplifiers)
O =
,
No
load
Full range 7.5 6
mW
†All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for
TL022C is 0°C to 70°C and for TL022M is –55°C to 125°C.
operating characteristics, VCC±= ±15 V, TA = 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
trRise time
VI=20mV
RL=10kΩ
CL= 100
p
F
See Figure 1
0.3 µs
Overshoot factor
V
I =
20
mV
,
R
L =
10
kΩ
,
C
L=
100
pF
,
See
Fig
u
re
1
5%
SR Slew rate at unity gain VI = 10 V, RL = 10 kΩ, CL= 100 pF, See Figure 1 0.5 V/µs
TL022C, TL022M
DUAL LOW-POWER OPERATIONAL AMPLIFIERS
SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
Input
+
–
VI
0 V
Output
RL = 2 kΩ
CL = 100 pF
TEST CIRCUIT
INPUT VOLTAGE
WAVEFORM
Figure 1. Rise Time, Overshoot Factor, and Slew Rate
TYPICAL CHARACTERISTICS
10
7
4
2
1
0.7
0.4
0.2
0.1 0 2 4 6 8101214161820
No Load
No Signal
TA = 25°C
|VCC±| – Supply Voltage – V
TOTAL POWER DISSIPATION
vs
SUPPLY RATE
PD – Total Power Dissipation – mW
PD
Figure 2
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
TL022CD ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDE4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDE4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDE4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDG4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDG4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDG4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDR ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDR ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDR ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CP ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
TL022CP ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
TL022CP ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
TL022CPE4 ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
TL022CPE4 ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
TL022CPE4 ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU N / A for Pkg Type
TL022CPSR ACTIVE SO PS 8 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CPSR ACTIVE SO PS 8 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CPSR ACTIVE SO PS 8 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 4-Jun-2007
Addendum-Page 1
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
TL022CPSRE4 ACTIVE SO PS 8 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CPSRE4 ACTIVE SO PS 8 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CPSRE4 ACTIVE SO PS 8 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CPSRG4 ACTIVE SO PS 8 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CPSRG4 ACTIVE SO PS 8 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TL022CPSRG4 ACTIVE SO PS 8 2000 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 4-Jun-2007
Addendum-Page 2
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
TL022CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TL022CPSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
TL022CDR SOIC D 8 2500 340.5 338.1 20.6
TL022CPSR SO PS 8 2000 367.0 367.0 38.0
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated