TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 - SEPTEMBER 1973 - REVISED SEPTEMBER 1990 1OUT 1IN - 1IN + GND 1 8 2 7 3 6 4 5 VCC 2OUT 2IN - 2IN + TL022M . . . U PACKAGE (TOP VIEW) NC 1OUT 1IN - 1IN + VCC - TL022M IS NOT RECOMMENDED FOR NEW DESIGNS description The TL022 is a dual low-power operational amplifier designed to replace higher power devices in many applications without sacrificing system performance. High input impedance, low supply currents, and low equivalent input noise voltage over a wide range of operating supply voltages result in an extremely versatile operational amplifier for use in a variety of analog applications including battery-operated circuits. Internal frequency compensation, absence of latch-up, high slew rate, and output short-circuit protection assure ease of use. 1 10 2 9 3 8 4 7 5 6 NC VCC + 2OUT 2IN - 2IN + symbol (each amplifier) IN + OUT - D D D D D D TL022M . . . JG PACKAGE TL022C . . . D OR P PACKAGE (TOP VIEW) Very Low Power Consumption Power Dissipation With 2-V Supplies 170 W Typ Low Input Bias and Offset Currents Output Short-Circuit Protection Low Input Offset Voltage Internal Frequency Compensation Latch-Up-Free Operation Popular Dual Operational Amplifier Pinout + D D IN - The TL022C is characterized for operation from 0C to 70C. The TL022M is characterized for operation over the full military temperature range of - 55C to 125C. AVAILABLE OPTIONS TA VIOmax AT 25C 25 C 0C to 70C - 55C to 125C PACKAGE SMALL OUTLINE (D) CERAMIC DIP (JG) PLASTIC DIP (P) CERAMIC FLAT PACK (U) 5 mV TL022CD -- TL022CP -- 5 mV -- TL022MJG -- TL022MU The D package is available taped and reeled. Add the suffix R to the device type (i.e. TL022CDR). Copyright 1990, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 - SEPTEMBER 1973 - REVISED SEPTEMBER 1990 schematic OUT Common to Both Amplifiers Each Amplifier VCC + To Other Amplifier IN - IN + VCC - To Other Amplifier absolute maximum ratings over operating free-air temperature range (unless otherwise noted) TL022C TL022M UNIT Supply voltage, VCC+ (see Note 1) 18 22 V Supply voltage, VCC- (see Note 1) - 18 - 22 V Differential input voltage (see Note 2) 30 30 V Input voltage (any input, see Notes 1 and 3) 15 15 V Duration of output short circuit (see Note 4) unlimited unlimited Continuous total dissipation See Dissipation Rating Table 0 to 70 - 55 to 125 C - 65 to 150 - 65 to 150 C 300 C Operating free-air temperature range Storage temperature range Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds JG or U package Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or P package NOTES: 1. 2. 3. 4. C 260 All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC- . Differential voltages are at IN+ with respect to IN -. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. The output may be shorted to ground or either power supply. For the TL022M only, the unlimited duration of the short circuit applies at (or below) 125C case temperature or 75C free-air temperature. DISSIPATION RATING TABLE 2 PACKAGE TA 25C POWER RATING DERATING FACTOR DERATE ABOVE TA TA = 70C POWER RATING TA = 125C POWER RATING D 680 mW 5.8 mW/C 33C 464 mW -- JG 680 mW 8.4 mW/C 69C 672 mW 210 mW P 680 mW 8.0 mW/C 65C 640 mW -- U 675 mW 5.4 mW/C 25C 432 mW 135 mW POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 - SEPTEMBER 1973 - REVISED SEPTEMBER 1990 recommended operating conditions MIN MAX Supply voltage, VCC + 5 15 UNIT V Supply voltage, VCC - -5 - 15 V electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) TL022C TEST CONDITIONS PARAMETER MIN 25C TYP 1 VIO Input offset voltage VO = 0,, RS = 50 IIO Input offset current VO = 0 IIB Input bias current VO = 0 VICR Common-mode input voltage range VO(PP) Maximum peak-to-peak output voltage swing RL = 10 k 25C 20 RL 10 k Full range 20 AVD Large-signal g g differehtial voltage amplification RL 10 k,, VO = 10 V 25C 60 Full range 60 B1 Unity-gain bandwidth 25C CMRR Common-mode rejection j ratio VIC = VICRmin,, RS = 50 25C 60 Full range 60 kSVS Supply y voltage g sensitivity y (VIO /VCC) VCC = 9 V to 15 V,, RS = 50 Vn Equivalent E i l t input i t noise i voltage AVD = 20 dB, dB B = 1 Hz, Hz IOS Short-circuit output current 25C 6 ICC Supply y current ((both amplifiers) VO = 0 0, No load 25C 130 PD Total dissipation (both amplifiers) VO = 0, 0 No load Full range MIN 5 TYP MAX 1 5 7.5 25C 15 Full range 6 80 5 200 25C 100 Full range 25C 12 12 250 13 50 12 26 20 80 72 25C 26 86 200 30 200 dB 50 130 mA 250 250 7.5 3.9 7.5 V/V nV/Hz 6 250 250 3.9 150 150 50 nA MHz 72 60 30 nA dB 0.5 60 mV V 66 72 UNIT V 20 Full range Full range 13 12 Full range 25C 100 250 0.5 25C 40 100 400 Full range f = 1 kHz TL022M MAX 6 6 A mW All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for TL022C is 0C to 70C and for TL022M is - 55C to 125C. operating characteristics, VCC = 15 V, TA = 25C PARAMETER tr Rise time Overshoot factor SR Slew rate at unity gain TEST CONDITIONS MIN VI = 20 mV, mV RL = 10 k k, CL= 100 pF, pF See Figure 1 VI = 10 V, RL = 10 k, CL= 100 pF, See Figure 1 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TYP 0.3 MAX UNIT s 5% 0.5 V/s 3 TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 - SEPTEMBER 1973 - REVISED SEPTEMBER 1990 PARAMETER MEASUREMENT INFORMATION Output - VI Input + 0V INPUT VOLTAGE WAVEFORM CL = 100 pF RL = 2 k TEST CIRCUIT Figure 1. Rise Time, Overshoot Factor, and Slew Rate TYPICAL CHARACTERISTICS TOTAL POWER DISSIPATION vs SUPPLY RATE - Total Power Dissipation - mW PPD D 10 No Load No Signal TA = 25C 7 4 2 1 0.7 0.4 0.2 0.1 0 2 4 6 8 10 12 14 16 |VCC | - Supply Voltage - V Figure 2 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 18 20 PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL022CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL022CP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL022CP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL022CPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL022CPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL022CPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL022CPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL022CPSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CPSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CPSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL022CPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TL022CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL022CPSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TL022CDR TL022CPSR SOIC D 8 2500 340.5 338.1 20.6 SO PS 8 2000 367.0 367.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated