Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
+
fD
L
P
R
C
W
H
0.2 max.
Lot. No.
Polarity marking (−)
Series
R. Capacitance
R. Voltage
Surface Mount Type
Series : SVF
High voltage (50 V.DC max.)
Large capacitance (1000 F max.)
125 °C 1000 h
RoHS compliance, Halogen free
Features
Size code B6 C6 E7 E12 F12
Category temperature range
–55 °C to +125 °C
Rated voltage range
16 V.DC to 25 V.DC
16 V.DC to 50 V.DC
Rated capacitance range 27 µF to 82 µF 10 µF to 180 µF 18 µF to 270 µF 39 µF to 560 µF 68 µF to 1000 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Endurance
+125 °C, 1000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 200 % of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Capacitance change
Within ±20 % of the initial value
tan d< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking
Unit : mm
Size
code
fD±0.5 L +0.1 W±0.2 H±0.2 C±0.2 R P±0.2
B6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4
C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1
E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2
E12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2
F12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6
−0.4
Speci cations
Dimensions (not to scale)
Externals of fi gure are the reference.
Oct. 201600
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
1 Ripple current (100 kHz/ +105 °C < Tx < +125 °C) /Allowable ripple current (100 kHz/ Tx < +105 °C), 2 ESR (100 kHz to 300 kHz/+20 °C)
3 tan d (120 Hz/+20 °C) 4 After 2 minutes
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz
Coeffi cient 0.05 0.3 0.7 1
Frequency correction factor for ripple current
Characteristics list
Series
Rated
voltage
(V.DC)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard (Reel size : f380)
fDL
Ripple 1
current
(mAr.m.s.)
Allowable
1
ripple current
(mAr.m.s.)
ESR 2
(mΩ max.)
tan d 3LC 4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
SVF
16
82 5.0 5.9 B6 940 3000 27 0.12 262 16SVF82M 1500
180 6.3 5.9 C6 1040 3300 22 0.12 576 16SVF180M 1000
270 8.0 6.9 E7 1040 3300 22 0.12 864 16SVF270M 1000
560 8.0 11.9 E12 1560 4950 14 0.12 1792 16SVF560M 400
1000 10.0 12.6 F12 1700 5400 12 0.12 3200 16SVF1000M 400
20
56 5.0 5.9 B6 880 2800 30 0.12 224 20SVF56M 1500
120 6.3 5.9 C6 1010 3200 25 0.12 480 20SVF120M 1000
180 8.0 6.9 E7 1010 3200 25 0.12 720 20SVF180M 1000
390 8.0 11.9 E12 1560 4950 14 0.12 1560 20SVF390M 400
560 10.0 12.6 F12 1700 5400 12 0.12 2240 20SVF560M 400
25
27 5.0 5.9 B6 770 2450 40 0.12 135 25SVF27M 1500
47 6.3 5.9 C6 880 2800 30 0.12 235 25SVF47M 1000
56 6.3 5.9 880 2800 30 0.12 280 25SVF56M 1000
82 8.0 6.9 E7 940 3000 28 0.12 410 25SVF82M 1000
100 8.0 6.9 1010 3200 24 0.12 500 25SVF100M 1000
180 8.0 11.9 E12 1470 4650 16 0.12 900 25SVF180M 400
330 10.0 12.6 F12 1580 5000 14 0.12 1650 25SVF330M 400
35
22 6.3 5.9 C6 820 2600 35 0.12 154 35SVF22M 1000
39 8.0 6.9 E7 880 2800 30 0.12 273 35SVF39M 1000
82 8.0 11.9 E12 1260 4000 20 0.12 574 35SVF82M 400
120 10.0 12.6 F12 1390 4400 18 0.12 840 35SVF120M 400
50
10 6.3 5.9 C6 790 2500 40 0.12 100 50SVF10M 1000
18 8.0 6.9 E7 850 2700 35 0.12 180 50SVF18M 1000
39 8.0 11.9 E12 1200 3800 25 0.12 390 50SVF39M 400
68 10.0 12.6 F12 1350 4300 20 0.12 680 50SVF68M 400
Oct. 201600
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>