Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVF Features High voltage (50 V.DC max.) capacitance (1000 F max.) 125 C 1000 h RoHS compliance, Halogen free Large Specifications Size code B6 C6 E7 E12 Category temperature range -55 C to +125 C Rated voltage range 16 V.DC to 25 V.DC 16 V.DC to 50 V.DC Rated capacitance range 27 F to 82 F 10 F to 180 F 18 F to 270 F 39 F to 560 F Capacitance tolerance 20 % (120 Hz / + 20 C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +125 C, 1000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit +60 C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking F12 68 F to 1000 F Dimensions (not to scale) 0.2 max. W C H fD P - Polarity marking (-) Lot. No. + L R Unit : mm Series R. Capacitance R. Voltage Size code fD0.5 B6 C6 E7 E12 F12 5.0 6.3 8.0 8.0 10.0 L +0.1 -0.4 5.9 5.9 6.9 11.9 12.6 W0.2 H0.2 C0.2 5.3 6.6 8.3 8.3 10.3 5.3 6.6 8.3 8.3 10.3 6.0 7.3 9.0 9.0 11.0 R P0.2 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1 1.4 2.1 3.2 3.2 4.6 Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2016 Conductive Polymer Aluminum Solid Capacitors Characteristics list Series Rated Rated voltage capacitance (V.DC) (F) 16 20 SVF 25 35 50 82 180 270 560 1000 56 120 180 390 560 27 47 56 82 100 180 330 22 39 82 120 10 18 39 68 Case size (mm) fD L 5.0 6.3 8.0 8.0 10.0 5.0 6.3 8.0 8.0 10.0 5.0 6.3 6.3 8.0 8.0 8.0 10.0 6.3 8.0 8.0 10.0 6.3 8.0 8.0 10.0 5.9 5.9 6.9 11.9 12.6 5.9 5.9 6.9 11.9 12.6 5.9 5.9 5.9 6.9 6.9 11.9 12.6 5.9 6.9 11.9 12.6 5.9 6.9 11.9 12.6 Size code B6 C6 E7 E12 F12 B6 C6 E7 E12 F12 B6 C6 E7 E12 F12 C6 E7 E12 F12 C6 E7 E12 F12 Specifications Ripple 1 Allowable 1 ESR 2 current ripple current tan d 3 (m max.) (mAr.m.s.) (mAr.m.s.) 940 3000 27 0.12 1040 3300 22 0.12 1040 3300 22 0.12 1560 4950 14 0.12 1700 5400 12 0.12 880 2800 30 0.12 1010 3200 25 0.12 1010 3200 25 0.12 1560 4950 14 0.12 1700 5400 12 0.12 770 2450 40 0.12 880 2800 30 0.12 880 2800 30 0.12 940 3000 28 0.12 1010 3200 24 0.12 1470 4650 16 0.12 1580 5000 14 0.12 820 2600 35 0.12 880 2800 30 0.12 1260 4000 20 0.12 1390 4400 18 0.12 790 2500 40 0.12 850 2700 35 0.12 1200 3800 25 0.12 1350 4300 20 0.12 LC 4 (A) 262 576 864 1792 3200 224 480 720 1560 2240 135 235 280 410 500 900 1650 154 273 574 840 100 180 390 680 Standard (Reel size : f380) Min. Part number Packaging Q'ty (pcs) 16SVF82M 1500 16SVF180M 1000 16SVF270M 1000 16SVF560M 400 16SVF1000M 400 20SVF56M 1500 20SVF120M 1000 20SVF180M 1000 20SVF390M 400 20SVF560M 400 25SVF27M 1500 25SVF47M 1000 25SVF56M 1000 25SVF82M 1000 25SVF100M 1000 25SVF180M 400 25SVF330M 400 35SVF22M 1000 35SVF39M 1000 35SVF82M 400 35SVF120M 400 50SVF10M 1000 50SVF18M 1000 50SVF39M 400 50SVF68M 400 1 Ripple current (100 kHz/ +105 C < Tx < +125 C) /Allowable ripple current (100 kHz/ Tx < +105 C), 2 ESR (100 kHz to 300 kHz/+20 C) 3 tan d (120 Hz/+20 C) 4 After 2 minutes Please refer to each page in this catarog for "Reflow conditions" and "Taping specifications". Frequency correction factor for ripple current Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2016 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19