Ordering number:ENN5251 N-Channel Silicon MOSFET 2SK2406 Ultrahigh-Speed Switching, Motor Driver Applications Features Package Dimensions * Low ON-resistance. * Ultrahigh-speed switching. * High-speed diode. unit:mm 2083B [2SK2406] 2.3 1.5 6.5 5.0 0.5 5.5 7.0 4 0.85 0.7 7.5 0.8 1.6 1.2 0.6 0.5 1 2 3 2.3 2.3 1 : Gate 2 : Drain 3 : Source 4 : Drain SANYO : TP unit:mm 2092B [2SK2406] 6.5 5.0 4 2.3 0.5 2.3 2 2.5 1 0.6 0.8 0.85 1.2 7.0 5.5 1.5 0.5 3 1.2 0 to 0.2 2.3 1 : Gate 2 : Drain 3 : Source 4 : Drain SANYO : TP-FA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 82599TH (KT)/40196TS (KOTO) TA-0326 No.5251-1/4 2SK2406 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Symbol Conditions Ratings VDSS VGSS Unit 450 V 30 V 1 A ID IDP PW10s, duty cycle1% 4 A 1 W Allowable Power Dissipation PD 30 W Channel Temperature Tch 150 C Storage Temperature Tstg -55 to +150 C Tc=25C Electrical Characteristics at Ta = 25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source ON-State Resistance Input Capacitance Symbol V(BR)DSS IDSS ID=1mA, VGS=0 VDS=450V, VGS=0 IGSS VGS(off) VGS=30V, VDS=0 VDS=10V, ID=1mA | yfs | VDS=10V, ID=0.5A ID=0.5A, VGS=10V RDS(on) Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Diode Reverse Time Conditions VDS=20V, f=1MHz VDS=20V, f=1MHz Ratings min typ Unit max 450 V 2.0 0.4 1 mA 100 nA 3.0 V 4.5 0.8 3.5 S 300 pF 40 pF 8 pF td(on) VDS=20V, f=1MHz See specified Test Circuit 10 ns tr See specified Test Circuit 9 ns td(off) See specified Test Circuit 60 ns tf See specified Test Circuit 50 IS=1A, VGS=0 0.8 1.2 V IS=1A, di/dt=100A/s 80 120 ns VSD trr ns Switching Time Test Circuit No.5251-2/4 2SK2406 No.5251-3/4 2SK2406 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 1999. Specifications and information herein are subject to change without notice. PS No.5251-4/4