SFH618A, SFH6186 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current FEATURES A 1 4 C C 2 3 E * * * * * * * * 1 Good CTR linearity depending on forward current Low CTR degradation High collector emitter voltage, VCEO = 55 V Isolation test voltage, 5300 VRMS Low coupling capacitance End stackable, 0.100" (2.54 mm) spacing High common mode transient immunity Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * * * * 1 i179061-1 DESCRIPTION The SFH618A (DIP) and SFH6186 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 or SMD package. The coupling devices are designed for signal transmission between two electrically separated circuits.The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8 mm achieved with option 6. Telecom Industrial controls Battery powered equipment Office machines AGENCY APPROVALS The safety application model number covering all products in this datasheet is SFH618A. This model number should be used when consulting safety agency documents. * UL1577 * cUL * CSA * DIN EN 60747-5-5 (VDE 0884-5) available with option 1 * BSI * FIMKO ORDERING INFORMATION S F H 6 1 8 # PART NUMBER - # CTR BIN X 0 # PACKAGE OPTION # DIP-# Option 6 7.62 mm 10.16 mm Option 7 Option 9 T TAPE AND REEL > 0.7 mm AGENCY CERTIFIED/PACKAGE UL, cUL DIP-4 DIP-4, 400 mil, option 6 SMD-4, option 7 SMD-4, option 9 VDE, UL, cUL > 0.1 mm CTR (%) 1 mA 63 to 125 SFH618A-2 - 100 to 200 SFH618A-3 SFH618A-3X006 - 160 to 320 SFH618A-4 - SFH6186-2T (1) SFH6186-3T (1), SFH6186-3T1 SFH6186-4T (1) 250 to 500 SFH618A-5 SFH618A-5X007T (1) SFH6186-5T (1), SFH6186-5T1 63 to 125 100 to 200 160 to 320 250 to 500 DIP-4 DIP-4, 400 mil, option 6 SMD-4, option 7 - SFH618A-4X001 SFH618A-4X016 - SFH618A-5X016 SFH618A-5X017T (1) SMD-4, option 9 - SFH618A-3X001 SFH618A-3X016 SFH618A-3X017T (1) SFH6186-3X001T (1), SFH6186-3X001T1 SFH6186-4X001T SFH6186-5X001T (1) Notes * Additional options may be possible, please contact sales office (1) Also available in tubes, do not put T to the end Rev. 2.8, 29-Mar-18 Document Number: 83673 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH618A, SFH6186 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Pdiss 70 mW IF 60 mA Collector emitter voltage VCEO 55 V Emitter collector voltage VECO 7 V Power dissipation Forward current OUTPUT IC 50 mA IC 100 mA Pdiss 150 mW Storage temperature range Tstg -55 to +150 C Ambient temperature range Tamb -55 to +100 C Tj 125 C Tsld 260 C Collector current tp 1 ms Power dissipation COUPLER Junction temperature max. 10 s, dip soldering distance to seating plane 1.5 mm Soldering temperature Note * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability Axis Title 10000 Detector 150 1000 1st line 2nd line 2nd line Ptot - Total Power Dissipation (mW) 200 100 LED 100 50 10 0 0 25 50 75 100 125 Tamb - Ambient Temperature (C) Fig. 1 - Permissible Power Dissipation vs. Ambient Temperature Rev. 2.8, 29-Mar-18 Document Number: 83673 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH618A, SFH6186 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 5 mA VF - 1.1 1.5 V Reverse current VR = 6 V IR - 0.01 10 A Capacitance VR = 0 V, f = 1 MHz CO - 25 - pF Rthja - 1070 - K/W VCE = 10 V ICEO - 10 200 nA VCE = 5 V, f = 1 MHz CCE - 7 - pF Rthja - 500 - K/W SFH618A-2 VCEsat - 0.25 0.4 V SFH6186-2 VCEsat - 0.25 0.4 V SFH618A-3 VCEsat - 0.25 0.4 V SFH6186-3 VCEsat - 0.25 0.4 V SFH618A-4 VCEsat - 0.25 0.4 V SFH6186-4 VCEsat - 0.25 0.4 V SFH618A-5 VCEsat - 0.25 0.4 V SFH6186-5 VCEsat - 0.25 0.4 V CC - 0.25 - pF Thermal resistance OUTPUT Collector emitter leakage current Collector emitter capacitance Thermal resistance COUPLER IC = 0.32 mA, IF = 1 mA IC = 0.5 mA, IF = 1 mA Collector emitter saturation voltage IC = 0.8 mA, IF = 1 mA IC = 1.25 mA, IF = 1 mA Coupling capacitance Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION IF = 1 mA, VCE = 0.5 V IF = 0.5 mA, VCE = 1.5 V IF = 1 mA, VCE = 0.5 V IF = 0.5 mA, VCE = 1.5 V IC/IF IF = 1 mA, VCE = 0.5 V IF = 0.5 mA, VCE = 1.5 V IF = 1 mA, VCE = 0.5 V IF = 0.5 mA, VCE = 1.5 V PART SYMBOL MIN. TYP. MAX. UNIT SFH618A-2 CTR 63 - 125 % % SFH6186-2 CTR 63 - 125 SFH618A-2 CTR 32 75 - % SFH6186-2 CTR 32 75 - % SFH618A-3 CTR 100 - 200 % SFH6186-3 CTR 100 - 200 % SFH618A-3 CTR 50 120 - % SFH6186-3 CTR 50 120 - % SFH618A-4 CTR 160 - 320 % % SFH6186-4 CTR 160 - 320 SFH618A-4 CTR 80 200 - % SFH6186-4 CTR 80 200 - % SFH618A-5 CTR 250 - 500 % SFH6186-5 CTR 250 - 500 % SFH618A-5 CTR 125 300 - % SFH6186-5 CTR 125 300 - % SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER Turn on time Rise time Turn off time Fall time Rev. 2.8, 29-Mar-18 TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT VCC = 5 V, IC = 2 mA, RL = 100 VCC = 5 V, IC = 2 mA, RL = 100 VCC = 5 V, IC = 2 mA, RL = 100 VCC = 5 V, IC = 2 mA, RL = 100 ton tr toff tf - 6 3.5 5.5 5 - s s s s Document Number: 83673 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH618A, SFH6186 www.vishay.com Vishay Semiconductors VCC = 5 V Input pulse Input RL 5V 90 % VOUT Output pulse 10 % tr tf toff ton 22986 isfh618a_10 Fig. 2 - Test Circuit Fig. 3 - Parameter and Limit Definition SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL Climatic classification According to IEC 68 part 1 Pollution degree According to DIN VDE 0109 Comparative tracking index VALUE UNIT 55 / 115 / 21 2 Insulation group IIIa CTI 175 According to UL1577, t = 1 min VISO 4470 VRMS Tested withstanding isolation voltage According to UL1577, t = 1 s VISO 5300 VRMS Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak Tamb = 25 C, VIO = 500 V RIO 1012 Tamb = 100 C, VIO = 500 V RIO 1011 PSO 700 mW Input safety current ISI 400 mA Input safety temperature TS 175 C 7 mm Maximum rated withstanding isolation voltage Isolation resistance Output safety power Creepage distance DIP-4 Clearance distance Creepage distance DIP-4, 400 mil, option 6 Clearance distance Creepage distance Insulation thickness DTI mm mm 8 mm 7 mm 7 mm 0.4 mm SMD-4, option 7 and option 9 Clearance distance 7 8 Note * As per DIN EN 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) Tamb = 110 C Tamb = 75 C Tamb = 25 C Tamb = 0 C Tamb = - 55 C 10 IC - Collector Current (mA) IF - Forward Current (mA) 100 1 0.1 IF = 25 mA 50 IF = 20 mA 40 IF = 15 mA 30 IF = 10 mA 20 10 IF = 5 mA IF = 1 mA 0 0.6 0.8 1.0 1.2 1.4 1.6 VF - Forward Voltage (V) Fig. 4 - Forward Voltage vs. Forward Current Rev. 2.8, 29-Mar-18 0 1 2 3 4 5 6 7 8 9 10 VCE - Collector Emitter Voltage (V) Fig. 5 - Collector Current vs. Collector Emitter Voltage Document Number: 83673 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH618A, SFH6186 www.vishay.com Vishay Semiconductors 1.4 10 000 NCTR - Normalized CTR (sat) ICE0 - Leakage Current (nA) IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 0.001 VCE = 5.0 V 1.2 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 C -60 -40 -20 80 100 120 Tamb - Ambient Temperature (C) IC - Collector Current (mA) 35 IF = 25 mA 25 20 IF = 1 mA IF = 10 mA IF = 0.5 mA IF = 5 mA 15 10 5 IF = 2 mA 0 0.0 0.1 0.2 0.3 40 0.4 1.4 60 80 100 120 VCE = 0.4 V 1.2 1.0 0.8 0.6 0.4 0.2 0 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 C -60 -40 -20 VCE - Collector Emitter Voltage (V) Fig. 7 - Collector Current vs. Collector Emitter Voltage 0 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 10 - Normalized Current Transfer Ratio vs. Ambient Temperature (non-sat.) 0.12 2.0 IF = 1 mA 0.10 0.08 0.06 0.04 0.02 NCTR - Normalized CTR (sat) VCEsat - Collector Emitter Voltage (V) 20 Fig. 9 - Normalized Current Transfer Ratio vs. Ambient Temperature (sat.) NCTR - Normalized CTR (non-saturated) Fig. 6 - Collector Emitter Current vs. Ambient Temperature 30 0 Tamb - Ambient Temperature (C) 1.8 1.6 1.4 Tamb = 0 C VCE = 0.4 V Normalized to: IF = 1 mA, VCE = 5 V 1.2 1.0 0.8 0.6 Tamb = 25 C 0.4 0.2 Tamb = 110 C 0.0 0.00 -60 -40 -20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 8 - Collector Emitter Voltage vs. Ambient Temperature Rev. 2.8, 29-Mar-18 Tamb = -55 C 0.1 1 10 100 IF - Forward Current (mA) Fig. 11 - Current Transfer Ratio vs. Forward Current (sat.) Document Number: 83673 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH618A, SFH6186 www.vishay.com Vishay Semiconductors 1000 Tamb = 0 C Tamb = -55 C 2.0 1.5 Tamb = 25 C 1.0 Tamb = 110 C 0.5 Normalized to: IF = 1 mA, VCE = 5 V ton, toff - Switching Time (s) NCTR - Normalized CTR (NS) 2.5 0.0 VCE = 5 V IF = 1 mA toff (s) 100 ton (s) 10 1 0.1 1 10 100 0 Fig. 12 - Current Transfer Ratio vs. Forward Current (non-sat.) 10 15 20 Fig. 15 - Switching Time vs. Load Resistance 1000 0 VCE = 5 V, Tamb = 25 C RL = 100 -5 -10 100 Voltage Gain fCTR - Cut-off-Frequency (kHz) 5 RL - Load Resistance (k) IF - Forward Current (mA) 10 -15 -20 RL = 1000 -25 -30 -35 1 0.1 VCE = 5 V -40 1 10 100 IC - Collector Current (mA) 1 10 100 1000 f - Frequency (kHz) Fig. 13 - Cut-Off Frequency vs. Collector Current Fig. 16 - Voltage Gain vs. Frequency 0 VCE = 5 V -20 RL = 100 Phase Angle (deg) -40 -60 -80 -100 RL = 1000 -120 -140 -160 1 10 100 1000 f - Frequency (kHz) Fig. 14 - Phase Angle vs. Frequency Rev. 2.8, 29-Mar-18 Document Number: 83673 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH618A, SFH6186 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) 2 1 Pin one ID 6.48 6.81 ISO method A 3 4 4.55 4.83 7.62 typ. 0.79 typ. 0.76 1.14 1.27 typ. 3.30 3.81 2.79 3.30 0.508 0.89 0.46 0.56 i178027 5.84 6.35 10 4 typ. 0 to 15 0.2 0.3 1.27 2.54 SMD 0.76 Pin one ID R 0.25 2.54 1.78 6.48 6.81 1.52 8 min. 11.05 3 4 9.52 10.03 4.55 4.83 0.76 1.14 7.52 7.90 0.79 typ. 10 3.30 3.81 0.25 typ. ISO method A 8 min. 0.249 0.102 4 typ. 2.54 typ. i178029 Option 6 Option 7 10.36 9.96 7.8 7.4 3 to 7 0.508 1.020 Lead coplanarity 0.004 max. 1.27 typ. Option 9 or SFH6186 9.53 10.03 7.62 ref. 7.62 typ. 4.6 4.1 0.102 0.249 0.30 typ. 0.7 8 min. 10.16 10.92 0.51 1.02 8.4 min. 10.3 max. 0.35 0.25 15 max. 0.76 2.54 R0.25 0.76 2.54 R0.25 1.78 18450-11 Rev. 2.8, 29-Mar-18 8 min. 11.05 1.52 1.78 8 min. 11.05 1.52 Document Number: 83673 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH618A, SFH6186 www.vishay.com Vishay Semiconductors PACKAGE MARKING (example of SFH618A-3X001) YWW 68 SFH618A-3 V Notes * VDE logo is only marked on option 1 parts * Tape and reel suffix (T) is not part of the package marking TAPE AND REEL PACKAGING (in millimeters) The tape is 16 mm and is wound on a 33 cm reel. There are 1000 parts per reel. Taped and reeled 4 pin optocouplers conform to EIA-481-2 and IEC60286-3. SMD-4 ("T") Pin 1 and top of component 4 0.1 1.5 min. 2 0.05 10 pitch cumulative tolerance on tape 0.2 1.75 0.1 0.3 max. Top cover tape 10.2 7.5 0.05 4.07 16 0.3 5.05 13.3 12 0.1 max. Center lines of cavity Embossment 18005 O 1.5 Direction of feed SMD-4, 90 Rotation ("T1") 16.00 + 0.30, -0.10 (0.013 (0.0008), -0.0004) 4 0.1 (0.157 0.004) 2 0.10 (0.079 0.004) 1.75 0.1 1.5 + 0.10, - 0.00 (0.069 0.004) (0.59 0.004) 7.5 0.01 (0.295 0.004) 10.36 0.10 0.408 0.004 16 0.3 (0.630 0.012) 10.36 0.10 0.408 0.004 4 8.0 0.10 (0.315 + 0.004) 4.92 0.10 0.194 0.004 1.5 + 0.25, - 0.0 0.059 + 0.001, - 0.0 18401 Rev. 2.8, 29-Mar-18 Document Number: 83673 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH618A, SFH6186 www.vishay.com Vishay Semiconductors SOLDER PROFILES HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 Axis Title 300 10000 5s Floor life: unlimited Lead temperature 200 235 C to 260 C Wirst wave Moisture sensitivity level 1, according to J-STD-020 1000 ca. 2 K/s ca. 200 K/s 150 Conditions: Tamb < 30 C, RH < 85 % Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 2nd line Temperature (C) 250 100 C to 130 C 100 100 2 K/s 50 ca. 5 K/s Forced cooling 10 0 0 50 100 150 200 250 Time (s) 948626 Fig. 17 - Recommended Wave Soldering Double Wave Profile for DIP Devices Axis Title 10000 300 Max. 260 C 255 C 240 C 217 C 245 C 1000 200 Max. 30 s 1st line 2nd line 2nd line Temperature (C) 250 150 Max. 120 s 100 Max. 100 s Max. ramp down 6 C/s 100 Max. ramp up 3 C/s 50 10 0 0 19841 50 100 150 200 250 300 Time (s) Fig. 18 - Recommended Lead (Pb)-free Reflow Solder Profile for SMD Devices Rev. 2.8, 29-Mar-18 Document Number: 83673 9 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: SFH6186-2 SFH6186-2T SFH6186-3 SFH6186-3T SFH6186-4 SFH6186-4T SFH6186-5 SFH6186-5T SFH618A-2 SFH618A-3 SFH618A-4 SFH618A-5 SFH6186-5T1 SFH618A-3X001 SFH618A-3X006 SFH618A3X016 SFH618A-3X017 SFH618A-4X001 SFH618A-4X016 SFH618A-5X007 SFH618A-5X007T SFH618A-5X016 SFH618A-5X017 SFH618A-5X017T SFH6186-3X001 SFH6186-3X001T SFH6186-4X001T SFH6186-5X001 SFH6186-5X001T