Single and Two-phase EMC/RFI Filters
for Industrial Electronics
Approvalsn Excellent filter performance for appli-
cations with high interference levels
n Filters for two-phase supply up to
2x 520VAC (P - P) available
n Fast and comfortable snap-in installation
on popular TS 35 DIN-rails up to 45A
n Industrial grade terminal blocks for
unsurpassed electrical safety
Typical applications
n FN 2410 filters up to 100A are designed for
traditional chassis mounting.
n For extra fast installation, FN 2412 filters
up to 45A can comfortably be snapped-in
on popular TS 35 DIN-rails which are
common in most electrical cabinets.
n Both FN 2410 and FN 2412 are also avail-
able as „H versions“. These are ideally
suitable for an operation on two phases in
a three-phase power network, handling
voltages up to 520VAC.
n All filters provide an exceptional conducted
attenuation performance, based on chokes
with high saturation resistance and excellent
thermal behavior. Thus, all filters retain
the expected filter performance even in
very noisy applications and under full load
conditions.
n Touch-safe industrial grade terminal
blocks provide maximum electrical safety
and protect humans from undeliberate
contact with life conductors. They help to
fulfill the most demanding installation
standards.
n Small to medium-sized machines and
industrial equipment
n High-end single-phase power supplies
n Single-phase variable speed motor drives,
inverters and converters
n DIN-rail filter versions are ideal for panel
building and electrical cabinets
n Various noisy applications with higher
power single-phase or two-phase supply
Features and benefits
Technical specifications
Maximum continuous operating voltage: 1x 250VAC (FN 2410 / FN 2412)
2x 520/300VAC (FN 2410H / FN 2412H)
Operating frequency: dc to 400Hz (except FN 2410H-60/-80/-100: 250Hz)
Rated currents: 8 to 100A @ 50°C (FN 2410)
8 to 45A @ 50°C (FN 2412)
High potential test voltage: P –> E 2000VAC for 2 sec
P –> N 1100VDC for 2 sec
P –> E 2700VDC for 2 sec (H types)
P –> P 2250VDC for 2 sec (H types)
Protection category: IP20
Overload capability: 4x rated current at switch on,
1.5x rated current for 1 minute, once per hour
Temperature range (operation and storage): -25°C to +100°C (25/100/21)
Flammability corresponding to: UL 94V-2 or better
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
MTBF @ 50°C/250V (Mil-HB-217F): 1,200,000 hours
MTBF @ 50°C/520V (Mil-HB-217F): 250,000 hours (H types)
Typical electrical schematic
P
PE
N
Line
Cx R2xL 2xCy
P‘
PE
Load
N‘
Cx
1-phase Filters
FN 2410 / FN 2412
Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym
Typical filter attenuation
8 to 45A types 60 to 100A types
Filter Rated current Leakage current* Power loss Input/Output Weight
@ 50°C (40°C) @ 230VAC/50Hz @ 25°C/50Hz connections
[A] [mA] [W] [kg]
Filter selection table
FN 2410-8-44 8 (8.8) 3.4 2.6 -44 0.4
FN 2410-16-44 16 (17.5) 3.4 3.5 -44 0.5
FN 2410-25-33 25 (27.4) 3.4 5.5 -33 0.6
FN 2410-32-33 32 (35.0) 3.4 5.6 -33 0.7
FN 2410-45-33 45 (49.3) 3.4 7.4 -33 0.7
FN 2410-60-34 60 (65.7) 3.4 5.5 -34 1.8
FN 2410-80-34 80 (87.6) 3.4 9.9 -34 1.8
FN 2410-100-34 100 (109.5) 3.4 15.4 -34 1.8
FN 2410H-8-44 8 (8.8) 3.4 2.6 -44 0.5
FN 2410H-16-44 16 (17.5) 3.4 3.5 -44 0.6
FN 2410H-25-33 25 (27.4) 3.4 5.5 -33 0.7
FN 2410H-32-33 32 (35.0) 3.4 5.6 -33 0.8
FN 2410H-45-33 45 (49.3) 3.4 7.4 -33 0.8
FN 2410H-60-34 60 (65.7) 3.4 5.5 -34 1.9
FN 2410H-80-34 80 (87.6) 3.4 9.9 -34 1.9
FN 2410H-100-34 100 (109.5) 3.4 15.4 -34 1.9
FN 2412-8-44 8 (8.8) 3.4 2.6 -44 0.4
FN 2412-16-44 16 (17.5) 3.4 3.5 -44 0.6
FN 2412-25-33 25 (27.4) 3.4 5.5 -33 0.7
FN 2412-32-33 32 (35.0) 3.4 5.6 -33 0.8
FN 2412-45-33 45 (49.3) 3.4 7.4 -33 0.8
FN 2412H-8-44 8 (8.8) 3.4 2.6 -44 0.5
FN 2412H-16-44 16 (17.5) 3.4 3.5 -44 0.7
FN 2412H-25-33 25 (27.4) 3.4 5.5 -33 0.8
FN 2412H-32-33 32 (35.0) 3.4 5.6 -33 0.9
FN 2412H-45-33 45 (49.3) 3.4 7.4 -33 0.9
* Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
> Components > FN 2410 / FN 2412
-33 -34 -44
Filter input/output connector cross sections
Solid wire 16mm2 35mm2 10mm2
Flex wire 10mm2 25mm2 6mm2
AWG type wire AWG 6 AWG 2 AWG 8
Recommended torque 1.5 - 1.8Nm 4.0 - 4.5Nm 1.5 - 1.8Nm
Please visit www.schaffner.com to find more details on filter connectors.
Mechanical data
FN 2410(H) FN 2412(H)
A
C
B
E
G
F
J
AB
J
H
C
L
L
D I I
TS 35 DIN-RAIL
FN 2410 FN 2412
8A 16A 25A 32A 45A 60A 80A 100A 8A 16A 25A 32A 45A
Dimensions
A 130 130 130 130 130 165 165 165 110 110 110 110 110
B 93 93 93 93 93 115 115 115 93 93 93 93 93
C 62 62 76 76 76 100 100 100 73 73 87 87 87
D 108 108 108 108 108 140 140 140
E 120 120 120 120 120 155 155 155
F 70 70 70 70 70 90 90 90
G 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3
H 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2
I 22 22 25 25 25 39 39 39 22 22 25 25 25
J M6 M6 M6 M6 M6 M8 M8 M8 M6 M6 M6 M6 M6
L 17.5 17.5 31.5 31.5 31.5 39.2 39.2 39.2 28.5 28.5 42.5 42.5 42.5
All dimensions in mm; 1 inch = 25.4mm
Tolerances according: ISO 2768-m / EN 22768-m
> Components > FN 2410 / FN 2412
Your local partner: To find your local partner within Schaffner’s global network, please go to www.schaffner.com May 2011
To find your local partner within
Schaffner‘s global network, please go to
www.schaffner.com
May 2011
© 2011 Schaffner EMC.
Specifications subject to change without
notice. All trademarks recognized.
Schaffner is an ISO-registered company.
Its products are designed and manufac-
tured under the strict quality and environ-
mental requirements of the ISO 9001 and
ISO 14001 standards.
This document has been carefully
checked. However, Schaffner does not
assume any liability for errors or inac-
curacies.
Headquarters and
global innovation and
development center
Schaffner Group
Nordstrasse 11
4542 Luterbach
Switzerland
T +41 32 681 66 26
F +41 32 681 66 30
info@schaffner.ch
www.schaffner.com
Sales and application centers
China
Schaffner EMC Ltd. Shanghai
Building 11, Lane 1365
East Kangqiao Road
Shanghai 201319
T +86 21 6813 9855
F +86 21 6813 9811
cschina@schaffner.com
www.schaffner.com
Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
germanysales@schaffner.com
Finland
Schaffner Oy
Tynninkuja 7
08700 Lohja
T +358 19 35 72 71
F +358 19 32 66 10
finlandsales@schaffner.com
France
Schaffner EMC S.A.S.
112, Quai de Bezons
95103 Argenteuil
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com
Italy
Schaffner EMC S.r.l.
Via Galileo Galilei, 47
20092 Cinisello Balsamo (MI)
T +39 02 66 04 30 45/47
F +39 02 61 23 943
italysales@schaffner.com
Japan
Schaffner EMC K.K.
Mitsui-Seimei Sangenjaya Bldg. 7F
1-32-12, Kamiuma, Setagaya-ku
Tokyo 154-0011
T +81 3 5712 3650
F +81 3 5712 3651
japansales@schaffner.com
www.schaffner.jp
Sweden
Schaffner EMC AB
Turebergstorg 1, 6
19147 Sollentuna
T +46 8 5792 1121 / 22
F +46 8 92 96 90
swedensales@schaffner.com
Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
F +41 32 681 66 41
sales@schaffner.ch
Singapore
Schaffner EMC Pte Ltd.
Blk 3015A Ubi Road 1
05-09 Kampong Ubi Industrial
Estate
T +65 6377 3283
F +65 6377 3281
singaporesales@schaffner.com
Spain
Schaffner EMC España
Calle Caléndula 93,
Miniparc III, Edificio E
El Soto de la Moraleja,
Alcobendas
28109 Madrid
T +34 618 176 133
spainsales@schaffner.com
Taiwan
Schaffner EMV Ltd.
6th Floor, No 413
Rui Guang Road
Neihu District
Taipei City 114
T +886 2 87525050
F+886 2 87518086
taiwansales@schaffner.com
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muang P.O. Box 14
Lamphun 51000
T +66 53 58 11 04
F +66 53 58 10 19
thailandsales@schaffner.com
UK
Schaffner Ltd.
5 Ashville Way
Molly Millars Lane
Wokingham
Berkshire RG41 2PL
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com
www.schaffner.uk.com
USA
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey 08837
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffner.com/us
