1-phase Filters FN 2410 / FN 2412 Single and Two-phase EMC/RFI Filters for Industrial Electronics n n n n Excellent filter performance for applications with high interference levels Filters for two-phase supply up to 2x 520VAC (P - P) available Fast and comfortable snap-in installation on popular TS 35 DIN-rails up to 45A Industrial grade terminal blocks for unsurpassed electrical safety Technical specifications Maximum continuous operating voltage: Operating frequency: Rated currents: High potential test voltage: Protection category: Overload capability: Temperature range (operation and storage): Flammability corresponding to: Design corresponding to: MTBF @ 50C/250V (Mil-HB-217F): MTBF @ 50C/520V (Mil-HB-217F): Typical electrical schematic 1x 250VAC (FN 2410 / FN 2412) 2x 520/300VAC (FN 2410H / FN 2412H) dc to 400Hz (except FN 2410H-60/-80/-100: 250Hz) 8 to 100A @ 50C (FN 2410) 8 to 45A @ 50C (FN 2412) P -> E 2000VAC for 2 sec P -> N 1100VDC for 2 sec P -> E 2700VDC for 2 sec (H types) P -> P 2250VDC for 2 sec (H types) IP20 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour -25C to +100C (25/100/21) UL 94V-2 or better UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 1,200,000 hours 250,000 hours (H types) n n FN 2410 filters up to 100A are designed for Cx 2xL Cx R 2xCy P P` PE PE N N` Line Load Typical applications Features and benefits n Approvals n All filters provide an exceptional conducted n Small to medium-sized machines and traditional chassis mounting. attenuation performance, based on chokes For extra fast installation, FN 2412 filters with high saturation resistance and excellent n High-end single-phase power supplies up to 45A can comfortably be snapped-in thermal behavior. Thus, all filters retain n Single-phase variable speed motor drives, on popular TS 35 DIN-rails which are the expected filter performance even in common in most electrical cabinets. very noisy applications and under full load Both FN 2410 and FN 2412 are also avail- conditions. able as H versions". These are ideally n Touch-safe industrial grade terminal suitable for an operation on two phases in blocks provide maximum electrical safety a three-phase power network, handling and protect humans from undeliberate voltages up to 520VAC. contact with life conductors. They help to fulfill the most demanding installation standards. industrial equipment inverters and converters n DIN-rail filter versions are ideal for panel building and electrical cabinets n Various noisy applications with higher power single-phase or two-phase supply > Components > FN 2410 / FN 2412 Filter selection table Filter FN 2410-8-44 FN 2410-16-44 FN 2410-25-33 FN 2410-32-33 FN 2410-45-33 FN 2410-60-34 FN 2410-80-34 FN 2410-100-34 FN 2410H-8-44 FN 2410H-16-44 FN 2410H-25-33 FN 2410H-32-33 FN 2410H-45-33 FN 2410H-60-34 FN 2410H-80-34 FN 2410H-100-34 FN 2412-8-44 FN 2412-16-44 FN 2412-25-33 FN 2412-32-33 FN 2412-45-33 FN 2412H-8-44 FN 2412H-16-44 FN 2412H-25-33 FN 2412H-32-33 FN 2412H-45-33 * Rated current @ 50C (40C) Leakage current* @ 230VAC/50Hz [A] 8 (8.8) 16 (17.5) 25 (27.4) 32 (35.0) 45 (49.3) 60 (65.7) 80 (87.6) 100 (109.5) 8 (8.8) 16 (17.5) 25 (27.4) 32 (35.0) 45 (49.3) 60 (65.7) 80 (87.6) 100 (109.5) [mA] 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 8 (8.8) 16 (17.5) 25 (27.4) 32 (35.0) 45 (49.3) 8 (8.8) 16 (17.5) 25 (27.4) 32 (35.0) 45 (49.3) 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 Power loss @ 25C/50Hz Typical filter attenuation Per CISPR 17; A = 50/50 sym; B = 50/50 asym; C = 0.1/100 sym; D = 100/0.1 sym 60 to 100A types Weight [W] [kg] 2.6 -44 0.4 3.5 -44 0.5 5.5 -33 0.6 5.6 -33 0.7 7.4 -33 0.7 5.5 -34 1.8 9.9 -34 1.8 15.4 -34 1.8 2.6 -44 0.5 3.5 -44 0.6 5.5 -33 0.7 5.6 -33 0.8 7.4 -33 0.8 5.5 -34 1.9 9.9 -34 1.9 15.4 -34 1.9 2.6 3.5 5.5 5.6 7.4 2.6 3.5 5.5 5.6 7.4 Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. 8 to 45A types Input/Output connections -44 -44 -33 -33 -33 -44 -44 -33 -33 -33 0.4 0.6 0.7 0.8 0.8 0.5 0.7 0.8 0.9 0.9 > Components > FN 2410 / FN 2412 Mechanical data FN 2410(H) FN 2412(H) D I I C C L J H A L J B A B TS 35 DIN-RAIL G F E Dimensions FN 2410FN 2412 8A 16A 25A 32A 45A 60A 80A 100A 8A 16A A B C D E F G H I J L 130 93 62 108 120 70 5.3 1.0 22 M6 17.5 130 93 62 108 120 70 5.3 1.0 22 M6 17.5 130 93 76 108 120 70 5.3 1.0 25 M6 31.5 130 93 76 108 120 70 5.3 1.0 25 M6 31.5 130 93 76 108 120 70 5.3 1.0 25 M6 31.5 165 115 100 140 155 90 5.3 1.2 39 M8 39.2 165 115 100 140 155 90 5.3 1.2 39 M8 39.2 165 115 100 140 155 90 5.3 1.2 39 M8 39.2 25A 32A 45A 110 93 73 110 93 73 110 93 87 110 93 87 110 93 87 22 M6 28.5 22 M6 28.5 25 M6 42.5 25 M6 42.5 25 M6 42.5 All dimensions in mm; 1 inch = 25.4mm Tolerances according: ISO 2768-m / EN 22768-m Filter input/output connector cross sections Solid wire Flex wire AWG type wire Recommended torque -33 -34 -44 16mm2 10mm2 AWG 6 1.5 - 1.8Nm 35mm2 25mm2 AWG 2 4.0 - 4.5Nm 10mm2 6mm2 AWG 8 1.5 - 1.8Nm Please visit www.schaffner.com to find more details on filter connectors. Your local partner: To find your local partner within Schaffner's global network, please go to www.schaffner.com May 2011 Headquarters and global innovation and development center Schaffner Group Nordstrasse 11 4542 Luterbach Switzerland T +41 32 681 66 26 F +41 32 681 66 30 info@schaffner.ch www.schaffner.com Sales and application centers China Schaffner EMC Ltd. Shanghai Building 11, Lane 1365 East Kangqiao Road Shanghai 201319 T +86 21 6813 9855 F +86 21 6813 9811 cschina@schaffner.com www.schaffner.com Germany Schaffner Deutschland GmbH Schoemperlenstrasse 12B 76185 Karlsruhe T +49 721 56910 F +49 721 569110 germanysales@schaffner.com Finland Schaffner Oy Tynninkuja 7 08700 Lohja T +358 19 35 72 71 F +358 19 32 66 10 finlandsales@schaffner.com France Schaffner EMC S.A.S. 112, Quai de Bezons 95103 Argenteuil T +33 1 34 34 30 60 F +33 1 39 47 02 28 francesales@schaffner.com Italy Schaffner EMC S.r.l. Via Galileo Galilei, 47 20092 Cinisello Balsamo (MI) T +39 02 66 04 30 45/47 F +39 02 61 23 943 italysales@schaffner.com Japan Schaffner EMC K.K. Mitsui-Seimei Sangenjaya Bldg. 7F 1-32-12, Kamiuma, Setagaya-ku Tokyo 154-0011 T +81 3 5712 3650 F +81 3 5712 3651 japansales@schaffner.com www.schaffner.jp Sweden Schaffner EMC AB Turebergstorg 1, 6 19147 Sollentuna T +46 8 5792 1121 / 22 F +46 8 92 96 90 swedensales@schaffner.com Switzerland Schaffner EMV AG Nordstrasse 11 4542 Luterbach T +41 32 681 66 26 F +41 32 681 66 41 sales@schaffner.ch To find your local partner within Schaffner`s global network, please go to Singapore Schaffner EMC Pte Ltd. Blk 3015A Ubi Road 1 05-09 Kampong Ubi Industrial Estate T +65 6377 3283 F +65 6377 3281 singaporesales@schaffner.com (c) 2011 Schaffner EMC. Specifications subject to change without notice. All trademarks recognized. Spain Schaffner EMC Espana Calle Calendula 93, Miniparc III, Edificio E El Soto de la Moraleja, Alcobendas 28109 Madrid T +34 618 176 133 spainsales@schaffner.com Taiwan Schaffner EMV Ltd. 6th Floor, No 413 Rui Guang Road Neihu District Taipei City 114 T +886 2 87525050 F+886 2 87518086 taiwansales@schaffner.com Thailand Schaffner EMC Co. Ltd. Northern Region Industrial Estate 67 Moo 4 Tambon Ban Klang Amphur Muang P.O. Box 14 Lamphun 51000 T +66 53 58 11 04 F +66 53 58 10 19 thailandsales@schaffner.com UK Schaffner Ltd. 5 Ashville Way Molly Millars Lane Wokingham Berkshire RG41 2PL T +44 118 9770070 F +44 118 9792969 uksales@schaffner.com www.schaffner.uk.com USA Schaffner EMC Inc. 52 Mayfield Avenue Edison, New Jersey 08837 T +1 732 225 9533 F +1 732 225 4789 usasales@schaffner.com www.schaffner.com/us www.schaffner.com May 2011 Schaffner is an ISO-registered company. Its products are designed and manufactured under the strict quality and environmental requirements of the ISO 9001 and ISO 14001 standards. This document has been carefully checked. However, Schaffner does not assume any liability for errors or inaccuracies.