PHE840E RoHS Compliant * EMI suppressor, class X2, metallized polypropylene * 0.01 - 10 F, 300 VAC, +105C *New improved design: small dimensions including low profile capacitors L typical applications For worldwide use as electromagnetic interference suppressor in all X2 and across-the-line applications. B Construction Metallized polypropylene winding, encapsulated in self-extinguishing material meeting the requirements of UL 94 V-0. H Not for use in series with the mains. See www.kemet.com for more information. 0.5 d p Technical data Rated voltage 300 VAC 50/60 Hz Capacitance range 0.01 - 10 F Capacitance tolerance 20% standard, 10% option Temperature range -55 to +105C Climatic category 55/105/56/B Approvals ENEC, UL, cUL related to rated voltage and climatic category P Dissipation factor tan Maximum values at +23C C 0.1 F 0.1F < C 1 F 1 kHz 0.1% 0.1% 10 kHz 0.2% 0.4% 100 kHz 0.6% - 10.0 0.4 15.0 0.4 22.5 0.4 27.5 0.4 37.5 0.5 The 100% screening factory test is carried out at 2200 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. Resonance frequency Tabulated self-resonance frequencies f0 refer to 5 mm lead length. Insulation resistance C 0.33 F: 30 000 M C > 0.33 F: 10 000 F In DC applications Recommended voltage 760 VDC d std l 0.6 0.8 0.8 0.8 1.0 17 17 6 6 6 max l b 30 30 30 30 30 0.4 0.4 0.4 0.4 0.7 Tolerance in lead length +0 < 30 mm -1 mm C > 1 F 0.1% 0.8% - Test voltage between terminals l b 30 mm +5 -0 mm Environmental test data Endurance EN/IEC 60384-14:2005 1.25 x UR VAC 50 Hz, once every hour increased to 1000 VAC for 0.1 s, 1000 h at upper rated temperature Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each, 10-55 Hz at 0.75 mm or 98 m/s2 No visible damage No open or short circuit Bump IEC 60068-2-29 Test Eb 1000 bumps at 390 m/s2 No visible damage No open or short circuit Upper and lower rated temperature 5 cycles No visible damage Change of temperature IEC 60068-2-14 Test Na Active flammability EN/IEC 60384-14:2005 Passive flammability EN/IEC 60384-14:2005 Humidity UL1414 Enclosure material of UL94V-0 flammability class IEC 60068-2-3 Test Ca +40C and 90 - 95% R.H. 56 days 49 phe840E article table Capaci- BoxMax dimensionsMax tance code in mm fO dU/dtArticle code F BHLMHzV/s Capaci- BoxMax dimensionsMax tance code in mm fO dU/dtArticle code F BHLMHzV/s Lead spacing 10 mm 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 A01 A01 A01 A01 A01 A02 A02 A03 A03 A04 A04 4.0 4.0 4.0 4.0 4.0 4.5 4.5 5.0 5.0 6.0 6.0 9.0 9.0 9.0 9.0 9.0 10.5 10.5 11.0 11.0 12.0 12.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 11 10 9.4 8.9 8.6 8.1 7.6 6.6 6.1 5.6 5.0 100 100 100 100 100 100 100 100 100 100 100 PHE840EA5100MA01R17 PHE840EA5120MA01R17 PHE840EA5150MA01R17 PHE840EA5180MA01R17 PHE840EA5220MA01R17 PHE840EA5270MA02R17 PHE840EA5330MA02R17 PHE840EA5390MA03R17 PHE840EA5470MA03R17 PHE840EA5560MA04R17 PHE840EA5680MA04R17 Lead spacing 15 mm 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.22 0.22 0.27 0.33 0.33 0.33 0.39 0.47 B04 B04 B04 B04 B04 B05 B05 B10 B10 B06 B06 B17 B12 B11 B11 B17 B14 B16 B16 5.5 5.5 5.5 5.5 5.5 5.5 5.5 6.5 6.5 7.5 7.5 13.0 8.0 8.5 8.5 13.0 9.5 11.0 11.0 10.5 10.5 10.5 10.5 10.5 12.5 12.5 12.5 12.5 14.5 14.5 12.5 15.0 16.5 16.5 12.5 17.5 19.0 19.0 0.22 0.27 0.33 0.39 0.47 0.47 D13 D17 D17 D14 D14 D15 6.5 7.0 7.0 8.0 8.0 9.0 14.5 16.5 16.5 16.0 16.0 18.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 5.9 5.4 5.0 4.6 4.2 3.9 3.7 3.3 2.8 2.7 2.6 2.5 2.5 2.3 2.2 2.2 2.0 1.9 1.8 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 PHE840EB5330MB04R17 PHE840EB5390MB04R17 PHE840EB5470MB04R17 PHE840EB5560MB04R17 PHE840EB5680MB04R17 PHE840EB5820MB05R17 PHE840EB6100MB05R17 PHE840EB6120MB10R17 PHE840EB6150MB10R17 PHE840EB6180MB06R17 PHE840EX6220MB06R17 * PHE840EQ6220MB17R17 PHE840EB6220MB12R17 PHE840EB6270MB11R17 PHE840EX6330MB11R17* PHE840EH6330MB17R17 PHE840EB6330MB14R17 PHE840EB6390MB16R17 PHE840EB6470MB16R17 Lead spacing 22.5 mm 26.0 26.0 26.0 26.0 26.0 26.0 2.1 1.9 1.8 1.7 1.6 1.5 100 100 100 100 100 100 Lead spacing 22.5 mm 0.56 0.68 0.68 0.82 1.0 1.0 1.2 1.5 D15 D15 D18 D16 D16 D20 D19 D19 9.0 9.0 10.5 11.0 11.0 13.5 15.5 15.5 18.5 18.5 19.0 21.5 21.5 23.0 24.5 24.5 26.0 1.4 100 26.0 1.3 100 26.0 1.2 100 26.0 1.1 100 26.0 1.1 100 26.0 1.0 100 26.0 0.90 100 26.0 0.85 100 PHE840ED6560MD15R06L2 PHE840EY6680MD15R06L2* PHE840ED6680MD18R06L2 PHE840ED6820MD16R06L2 PHE840EY7100MD16R06L2* PHE840ED7100MD20R06L2 PHE840ED7120MD19R06L2 PHE840ED7150MD19R06L2 Lead spacing 27.5 mm 0.82 1.0 1.0 1.0 1.2 1.5 1.8 2.2 2.2 2.2 2.7 3.3 3.3 3.3 F11 F11 F12 F17 F03 F13 F14 F14 F15 F19 F15 F15 F16 F18 10.5 10.5 11.5 21.0 13.5 14.5 17.5 17.5 19.0 27.5 19.0 19.0 21.0 31.0 20.5 20.5 22.5 12.5 23.0 24.5 28.0 28.0 29.0 16.0 29.0 29.0 30.0 19.0 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 R05 R05 R04 R04 R02 R03 R06 R06 R08 R08 13.0 13.0 15.0 15.0 16.5 19.0 21.0 21.0 28.0 28.0 24.0 24.0 26.0 26.0 32.0 36.0 38.0 38.0 43.0 43.0 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 1.0 1.0 0.95 0.95 0.82 0.73 0.65 0.64 0.62 0.62 0.58 0.54 0.50 0.50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 PHE840EF6820MF11R06L2 PHE840EZ7100MF11R06L2* PHE840EF7100MF12R06L2 PHE840ET7100MF17R06L2 PHE840EF7120MF03R06L2 PHE840EF7150MF13R06L2 PHE840EF7180MF14R06L2 PHE840EZ7220MF14R06L2* PHE840EF7220MF15R06L2 PHE840ET7220MF19R06L2 PHE840EF7270MF15R06L2 PHE840EZ7330MF15R06L2* PHE840EF7330MF16R06L2 PHE840ET7330MF18R06L2 Lead spacing 37.5 mm PHE840ED6220MD13R06L2 PHE840ED6270MD17R06L2 PHE840ED6330MD17R06L2 PHE840ED6390MD14R06L2 * Only 20% tolerance PHE840EY6470MD14R06L2* PHE840ED6470MD15R06L2 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 0.60 0.58 0.53 0.49 0.46 0.44 0.41 0.39 0.30 0.26 100 100 100 100 100 100 100 100 100 100 PHE840ER7180MR05R06L2 PHE840ER7220MR05R06L2 PHE840ER7270MR04R06L2 PHE840ER7330MR04R06L2 PHE840ER7390MR02R06L2 PHE840ER7470MR03R06L2 PHE840ER7560MR06R06L2 PHE840ER7680MR06R06L2 PHE840ER7820MR08R06L2 PHE840ER8100MR08R06L2 Marking Approvals Certification BodySpecification ENEC EN/IEC 60384-14:2005 UL UL 1283 UL 1414 cUL recognition C 22.2 No. 8 C 22.2 No. 1 (UR = 250 VAC) * * * * * * * * * * RIFA RIFA article code Rated capacitance Capacitance tolerance code Rated voltage X2 Approval marks Manufacturing date code IEC climatic category Passive flammability class Ordering information The article code for the standard part is given in the article table. For other options, see page 11. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.