2002-07-17
Page 1
Preliminary data BSP 317 P
SIPMOS
Small-Signal-Transistor Product Summary
VDS -250 V
RDS(on) 4Ω
ID-0.43 A
Feature
• P-Channel
• Enhancement mode
• Logic Level
• dv/dt rated SOT-223
VPS05163
123
4
Gate
pin1
Drain
pin 2/ 4
Source
pin 3
Marking
BSP317P
Type Package Ordering Code Tape and Reel Information
BSP 317 P SOT-223 Q67042-S4167 -
Maximum Ratings, at Tj = 25 °C, unless otherwise specified
Parameter Symbol Value Unit
Continuous drain current
TA=25°C
TA=70°C
ID
-0.43
-0.34
A
Pulsed drain current
TA=25°C
ID puls -1.72
Reverse diode dv/dt
IS=-0.43A, VDS=-200V, di/dt=-200A/µs, Tjmax=150°C
dv/dt6 kV/µs
Gate source voltage VGS ±20 V
Power dissipation
TA=25°C
Ptot 1.8 W
Operating and storage temperature Tj , Tstg -55... +150 °C
IEC climatic category; DIN IEC 68-1 55/150/56
2002-07-17
Page 2
Preliminary data BSP 317 P
Thermal Characteristics
Parameter Symbol Values Unit
min. typ. max.
Characteristics
Thermal resistance, junction - soldering point
(Pin 4) RthJS - 15 25 K/W
SMD version, device on PCB:
@ min. footprint
@ 6 cm2 cooling area 1)
RthJA
-
-
80
48
115
70
Electrical Characteristics, at Tj = 25 °C, unless otherwise specified
Parameter Symbol Values Unit
min. typ. max.
Static Characteristics
Drain-source breakdown voltage
VGS=0, ID=-250µA
V(BR)DSS -250 - - V
Gate threshold voltage, VGS = VDS
ID=-370µA
VGS(th) -1 -1.5 -2
Zero gate voltage drain current
VDS=-250V, VGS=0, Tj=25°C
VDS=-250V, VGS=0, Tj=150°C
IDSS
-
-
-0.1
-10
-0.2
-100
µA
Gate-source leakage current
VGS=-20V, VDS=0
IGSS - -10 -100 nA
Drain-source on-state resistance
VGS=-4.5V, ID=-0.39A
RDS(on) - 3.3 5 Ω
Drain-source on-state resistance
VGS=-10V, ID=-0.43A
RDS(on) - 3 4
1Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm² (one layer, 70 µm thick) copper area for drain
connection. PCB is vertical without blown air.
2002-07-17
Page 3
Preliminary data BSP 317 P
Electrical Characteristics, at Tj = 25 °C, unless otherwise specified
Parameter Symbol Conditions Values Unit
min. typ. max.
Dynamic Characteristics
Transconductance gfs |VDS|≥2*|ID|*RDS(on)max ,
ID=-0.34A
0.38 0.76 - S
Input capacitance Ciss VGS=0, VDS=-25V,
f=1MHz
- 210 262 pF
Output capacitance Coss - 30 37
Reverse transfer capacitance Crss - 13.4 16.7
Turn-on delay time td(on) VDD=-30V, VGS=-10V,
ID=-0.43A, RG=6Ω
- 5.7 8.5 ns
Rise time tr- 11.1 16.6
Turn-off delay time td(off) - 254 381
Fall time tf- 67 100
Gate Charge Characteristics
Gate to source charge Qgs VDD=-200V, ID=-0.43A - -0.5 -0.65 nC
Gate to drain charge Qgd - -4 -5.2
Gate charge total QgVDD=-200V, ID=-0.43A,
VGS=0 to -10V
- -11.6 -15.1
Gate plateau voltage V(plateau) VDD=-200V, ID=-0.43A - -2.8 - V
Reverse Diode
Inverse diode continuous
forward current ISTA=25°C - - -0.43 A
Inv. diode direct current, pulsedISM - - -1.72
Inverse diode forward voltage VSD VGS=0, IF=-0.43A - -0.84 -1.2 V
Reverse recovery time trr VR=-125V, IF=lS,
diF/dt=100A/µs
- 92 138 ns
Reverse recovery charge Qrr - 210 315 nC
2002-07-17
Page 4
Preliminary data BSP 317 P
1 Power dissipation
Ptot = f (TA)
0 20 40 60 80 100 120 °C 160
TA
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
W
1.9 BSP 317 P
Ptot
2 Drain current
ID = f (TA)
parameter: |VGS| ≥ 10V
0 20 40 60 80 100 120 °C 160
TA
0
-0.05
-0.1
-0.15
-0.2
-0.25
-0.3
-0.35
-0.4
A
-0.5 BSP 317 P
ID
3 Safe operating area
ID = f ( VDS )
parameter : D = 0 , T
A
= 25°C
-10 -1 -10 0 -10 1 -10 2 -10 3
V
VDS
-3
-10
-2
-10
-1
-10
0
-10
1
-10
A
BSP 317 P
ID
R
DS(on)
= V
DS
/ I
D
DC
10 ms
1 ms
tp = 140.0µs
4 Transient thermal impedance
ZthJA = f (tp)
parameter : D = tp/T
10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 0
s
tp
-4
10
-3
10
-2
10
-1
10
0
10
1
10
2
10
K/W BSP 317 P
ZthJA
single pulse 0.01
0.02
0.05
0.10
0.20
D = 0.50
2002-07-17
Page 5
Preliminary data BSP 317 P
5 Typ. output characteristic
ID = f (VDS)
parameter: Tj =25°C, -VGS
0 0.5 1 1.5 2 2.5 3 3.5 4 V5
-VDS
0
0.2
0.4
0.6
0.8
1
1.2
A
1.6
-ID
10V
5V
4.4V
3.6V
3.2V
2.8V
2.4V
2.2V
6 Typ. drain-source on resistance
RDS(on) = f (ID)
parameter: VGS; Tj =25°C, -VGS
0 0.2 0.4 0.6 0.8 1 1.2 A1.6
-ID
0
1
2
3
4
5
6
7
8
Ω
10
RDS(on)
2.2V
2.4V
2.8V
3.2V
3.6V
4.4V
5V
10V
7 Typ. transfer characteristics
ID= f ( VGS ); |VDS|≥ 2 x |ID| x RDS(on)max
parameter: Tj = 25 °C
0 0.4 0.8 1.2 1.6 2 2.4 2.8 V3.6
-VGS
0
0.2
0.4
0.6
0.8
1
1.2
A
1.6
-ID
8 Typ. forward transconductance
gfs = f(ID)
parameter: T
j
=25°C
0 0.2 0.4 0.6 0.8 1 1.2 A1.6
-ID
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
S
1.4
gfs
2002-07-17
Page 6
Preliminary data BSP 317 P
9 Drain-source on-state resistance
RDS(on) = f (Tj)
parameter : ID = -0.43 A, VGS = -10 V
-60 -20 20 60 100 °C 180
Tj
0
1
2
3
4
5
6
7
8
9
Ω
11 BSP 317 P
RDS(on)
typ
98%
10 Typ. gate threshold voltage
VGS(th) = f (Tj)
parameter: VGS = VDS
-60 -20 20 60 100 °C 160
Tj
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
V
2.4
VGS(th)
2%
typ.
98%
11 Typ. capacitances
C = f (VDS)
parameter: VGS=0, f=1 MHz, Tj = 25°C
0 4 8 12 16 20 24 28 V36
-VDS
0
10
1
10
2
10
3
10
pF
C
Ciss
Coss
Crss
12 Forward character. of reverse diode
IF = f (VSD)
parameter: T
j
0 -0.4 -0.8 -1.2 -1.6 -2 -2.4 V-3
VSD
-2
-10
-1
-10
0
-10
1
-10
A
BSP 317 P
IF
Tj = 25 °C typ
Tj = 25 °C (98%)
Tj = 150 °C typ
Tj = 150 °C (98%)
2002-07-17
Page 7
Preliminary data BSP 317 P
13 Typ. gate charge
VGS = f (QGate)
parameter: ID = -0.43 A pulsed, Tj = 25°C
0 2 4 6 8 10 12 14 nC 18
|QG|
0
-2
-4
-6
-8
-10
-12
V
-16 BSP 317 P
VGS
20%
50%
80%
14 Drain-source breakdown voltage
V(BR)DSS = f (Tj)
-60 -20 20 60 100 °C 180
Tj
-225
-230
-235
-240
-245
-250
-255
-260
-265
-270
-275
-280
-285
V
-300 BSP 317 P
V(BR)DSS
2002-07-17
Page 8
Preliminary data BSP 317 P
Published by
Infineon Technologies AG,
Bereichs Kommunikation
St.-Martin-Strasse 53,
D-81541 München
© Infineon Technologies AG 1999
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of such components can reasonably be expected to
cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device
or system Life support devices or systems are intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health
of the user or other persons may be endangered.
