MBR2535CT ~ MBR2560CT DUAL SCHOTTKY
BARRIER RECTIFIERS
PRV : 35 ~ 60 Volts
Io : 30 Amperes
FEATURES :
* Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
* Dual rectifier construction, positive center tap
* Metal silicon junction, majority carrier conduction
* Low power loss, high efficiency
* Guardring for overvoltage protection
* For use in low voltage, high frequency inverters,
free wheeling, and polarity protection applications
* High temperature soldering : 250°C/10 seconds,
0.25" (6.35mm) from case
* Pb / RoHS Free
MECHANICAL DATA :
* Case : JEDEC TO-220AB molded plastic body
* Terminals: Plated leads, solderable per
MIL-STD-750 Method 2026
* Polarity: As marked
* Mounting Position: Any
* Weight : 2.24 grams (Approximately)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(
Tc = 25 °C unless otherwise noted
)
MB
R
MB
R
MB
R
MB
R
2535CT 2545CT 2550CT 2560CT
Maximum Repetitive Peak Reverse Voltage VRRM 35 45 50 60 V
Maximum RMS Voltage VRMS 35 45 50 60 V
Maximum DC Blocking Voltage VDC 35 45 50 60 V
Maximum Average Forward Current Total device 30
at TC = 130 °C Per leg 15
Peak Forward Surge Current, 8.3ms single half sine wave
superimposed on rated load (JEDEC Method) Per leg
Maximum Instantaneous Forward Voltage per leg (Note 1)
at IF = 15 A, TC = 25 °C
at IF = 15 A, TC = 125 °C
at IF = 30 A, TC = 25 °C
at IF = 30 A, TC = 125 °C
Maximum Reverse Current at Rated DC TC = 25 °C IRmA
Blocking Voltage per leg (Note 1) TC = 125 °C IR(H) mA
Typical Thermal Resistance from Junction to Case Per leg RӨJC °C/W
Operating Temperature Range TJ°C
Storage Temperature Range TSTG °C
Note : (1) Pulse test : 300 µs pluse width, 1% duty cycle
Page 1 of 2 Rev. 01 : March 9, 2006
RATINGS SYMBOL UNIT
IF(AV)
IFSM 150 A
A
VFV
-
-
0.82
0.73
0.75
0.65
-
-
1.5
- 65 to + 150
- 65 to + 175
1.0
50
0.2
40
0.105(2.67)
0.095(2.41)
PIN 2
0.205(5.20)
0.195(4.95)
0.635(16.13)
0.625(15.87)
0.055(1.39)
0.045(1.14)
0.145(3.68)
0.135(3.43)
0.160(4.06)
0.140(3.56)
0.603(15.32)
0.573(14.55)
0.560(14.22)
0.530(13.46)
0.350(8.89)
0.330(8.39)
0.185(4.70)
0.175(4.44)
0.037(0.94)
0.027(0.68)
0.415(10.54)MAX.
0.154(3.91)DIA.
0.148(3.74)
0.113(2.87)
0.103(2.62)
PIN 1
PIN 3 CASE
0.022(0.56)
0.014(0.36)
132
TO-220AB
Dimensions in inches and ( millimeters )
Certificate TH97/10561QM Certificate TW00/17276EM
FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER LEG
0 25 50 75 100 125 150 1 2 4 6 10 20 40 60 100
CASE TEMPERATURE, (°C) NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL INSTANTANEOUS FORWARD FIG.4 - TYPICAL REVERSE CHARACTERISTICS
CHARACTERISTICS PER LE
G
PER LE
G
Page 1 of 2 Rev. 01 : March 9, 2006
RATING AND CHARACTERISTIC CURVES ( MBR2535CT ~ MBR2560CT )
24
18
12
6
30
120
0
150
0
90
60
30
PEAK FORWARD SURGE
CURRENT, (A)
AVERAGE FORWARD
CURRENT, (A)
10
1.0
80
0.01
0.1
1000204060
PERCENT OF RATED PEAK
REVERSE VOLTAGE, (%)
INSTANTANEOUS REVERSE
CURRENT, (mA)
1.0
0.1
INSTANTANEOUS FORWARD
CURRENT, (A)
100
10
TJ =TJmax
8.3 ms single half sine-wave
(JEDEC Method)
0.01
INSTANTANEOUS FORWARD
VOLTAGE, (V)
0 0.1 0.3 0.5 0.7 0.9 1.10.2 0.4 0.6 0.8 1.0
0.001
MBR2535CT & MBR2545CT
MBR2550CT & MBR2560CT
TJ = 25 °C
TJ = 125 °C
Resistive or Inductive Load
Pluse Width = 300 µs
1% Duty Cycle
TJ = 25 °C
MBR2535CT & MBR2545CT
MBR2550CT & MBR2560CT
20
Certificate TH97/10561QM Certificate TW00/17276EM
