4N47U 4N48U 4N49U JAN, JANTX, JANTXV, AND JANS OPTOCOUPLERS MICROPAC OPTOELECTRONIC PRODUCTS DIVISION 06/23/03 Features: * Certified to MIL-PRF-14500/548 * High reliability * Base lead provided for conventional transistor biasing * Very high gain, high voltage transistor * Hermetically sealed for reliability and stability * Stability over wide temperature range * High voltage electrical isolation Applications: * * * * Line Receivers Switchmode Power Supplies Signal ground isolation Process Control input/output isolation DESCRIPTION Very high gain optocoupler utilizing GaAIAs infrared LED optically coupled to an N-P-N silicon phototransistor packaged in a hermetically sealed 6-pin leadless chip carrier. The 4N47U, 4N48U and 4N49U optocouplers can be supplied to customer specifications as well as JAN, JANTX, JANTXV, and JANS quality levels. *ABSOLUTE MAXIMUM RATINGS Input to Output Voltage .......................................................................................................................................................... 1kV Collector-Base Voltage ...........................................................................................................................................................45V Collector-Emitter Voltage .......................................................................................................................................................40V Emitter-Base Voltage ................................................................................................................................................................7V Input Diode Reverse Voltage....................................................................................................................................................2V Input Diode Continuous Forward Current at (or below) 25C Free-Air Temperature (see note 1) ....................................40mA Continuous Collector Current ..............................................................................................................................................50mA Peak Diode Current (Value Applies for tW 1 s, PRR < 300pps) ........................................................................................1A Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature (see Note 2) ................................300mW Operating Free-Air Temperature Range.............................................................................................................-55C to +125C Storage Temperature..........................................................................................................................................-65C to +125C Lead Temperature (10 seconds maximum) ....................................................................................................................... 240C Notes: 1. Derate linearly to 125C free-air temperature at the rate of 0.40 mA/C. 2. Derate linearly to 125C free-air temperature at the rate of 3 mW/C. * JEDEC registered data Package Dimensions 0.250 [6.35] 0.240 [6.10] PIN 1 IDENTIFIER Schematic Diagram 0.080 [2.03] 0.066 [1.68] 1 A C 0.175 [4.45] 0.165 [4.19] E 0.028 [0.71] 0.022 [0.56] 0.098 [2.49] 0.082 [2.08] 3 2 1 6 0.105 [2.67] 0.095 [2.41] 3 4 5 6 K 0.055 [1.40] 0.045 [1.14] 0.070 [1.78] 5 PLS 0.060 [1.52] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut St., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM B 5 4 4N47U, 4N48U, and 4N49U JAN, JANTX, JANTXV, AND JANS OPTOCOUPLERS 06/23/03 TA = 25C Unless otherwise specified ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL Input Diode Static Reverse Current MIN TYP MAX UNITS TEST CONDITIONS 100 NA VR = 2V 1.4 1.7 1.5 1.3 V IF = 10mA TYP MAX UNITS TEST CONDITIONS IR -55C +25C +100C Input Diode Static Forward Voltage VF 1.0 0.8 0.7 NOTE TA = 25C Unless otherwise specified OUTPUT TRANSISTOR PARAMETER SYMBOL MIN Collector-Base Breakdown Voltage V(BR)CBO 45 V IC = 100A, IE = 0, IF = 0 Collector-Emitter Breakdown Voltage V(BR)CEO 40 V IC = 1mA, IB = 0, IF = 0 V(BR)EBO 7 V IC = 0, IB = 100A, IF = 0 UNITS TEST CONDITIONS Emitter-Collector Breakdown Voltage COUPLED CHARACTERISTICS PARAMETER On State Collector Current TA = 25C Unless otherwise specified 4N47U 4N48U 4N49U On State Collector Current -55C 4N47U 4N48U 4N49U 4N47U 4N48U 4N49U On State Collector Current +100C NOTE SYMBOL MIN IC(ON) 0.5 1.0 2.0 IC(ON) IC(ON) TYP MAX NOTE MA VCE = 5V, IB = 0, IF = 1mA 5 10 0.7 1.4 2.8 0.5 1.0 2.0 MA VCE = 5V, IB = 0, IF = 2mA MA VCE = 5V, IB = 0, IF = 2mA 2 Off State Collector Current +25C IC(OFF) 100 NA VCE = 20V, IB = 0, IF = 0mA Off State Collector Current +100C IC(OFF) 100 A VCE = 20V, IB = 0, IF = 0mA 4N47U VCE(SAT) 0.3 V IC = 0.5mA, IB = 0, IF = 2mA 4N48U VCE(SAT) 0.3 V IC = 1mA, IB = 0, IF = 2mA 4N49U VCE(SAT) 0.3 V IC = 2mA, IB = 0, IF = 2mA VIN-OUT = 1kV 1 f = 1MHz, VIN-OUT = 1kV 1 Collector-Emitter Saturation Voltage 11 Input to Output Resistance RI-O Input to Output Capacitance CI-O 5 PF 4N47U 4N48U 4N49U tr / tf tr / tf tr / tf 20 25 25 s Rise Time/ Fall Time 4N47U tr / tf 0.85 s Photodiode Operation 4N48U tr / tf 0.85 s 4N49U tr / tf 0.85 s Rise Time/ Fall Time Phototransistor Operation 10 s VCC = 10V, IF = 10mA, RL = 100 s VCC = 10V, IF = 10mA, RL = 100 NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. 2. This parameter measured using pulse techniques tw =100s, duty cycle < 1%. RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 100 A Input Current, High Level IFH 2 10 mA VCE 5 10 V Supply Voltage UNITS SELECTION GUIDE PART NUMBER 4N47U 4N48U 4N49U JAN4N47U JAN4N48U JAN4N49U JANTX4N47U JANTX4N48U JANTX4N49U JANTXV4N47U JANTXV4N48U JANTXV4N49U JANS4N47U JANS4N48U JANS4N49U PART DESCRIPTION Commercial Commercial Commercial JAN Screened JAN Screened JAN Screened JANTX Screened JANTX Screened JANTX Screened JANTXV Screened JANTXV Screened JANTXV Screened JANS Screened JANS Screened JANS Screened MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut St., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM