Maximum Ratings and Thermal Characteristics(TA= 25°C unless otherwise noted)
Parameter
Symbol DF005SA DF01SA DF02SA DF04SA DF06SA DF08SA DF10SA
Unit
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward output rectified current
at TA= 40°C (2) IF(AV) 1.0 A
Peak forward surge current single half sine-wave
superimposed on rated load (JEDEC Method) TJ= 150°C IFSM 30 A
Rating for fusing (t < 8.3ms) I2t 4.5 A2sec
Typical thermal resistance per leg (2) RθJA 40 °C/W
RθJL 15
Operating junction and storage temperature range TJ, TSTG – 55 to +150 °C
Electrical Characteristics(TA= 25°C unless otherwise noted)
Maximum instantaneous forward voltage drop
per leg at 1.0A VF1.1 V
Maximum DC reverse current TA= 25°C 5.0 µA
at rated DC blocking voltage per leg TA= 125°C IR500
Typical junction capacitance per leg(1) CJ25 pF
Notes: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Units mounted on P.C.B. with 0.51 x 0.51” (13 x 13mm) copper pads
New Product
Mounting Pad Layout
DF005SA thru DF10SA
Miniature Glass Passivated Single-Phase
Surface Mount Bridge Rectifier
Reverse Voltage 50 to 1000V
Forward Current 1.0A
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• This series is UL listed under Recognized Component
Index, file number E54214
• Glass passivated chip junctions
• High surge overload rating of 30 Amperes peak
• Ideal for printed circuit boards
• High temperature soldering guaranteed:
260°C/10 seconds at 5 lbs. (2.3kg) tension
Mechanical Data
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols marked on body
Mounting Position: Any
Weight: 0.04oz., 1.0g
Packaging codes/options:
27/1.5K per 13” Reel (16mm Tape)
45/50 EA. per Tube-Bulk
0.255 (6.5)
0.245 (6.2)
0.013 (0.330)
0.009 (0.241)
0.060 (1.524)
0.040 (1.016)
0.404 (10.3)
0.013 (0.330)
0.003 (0.076)
0.047 (1.20)
0.040 (1.02)
0.205 (5.2)
0.195 (5.0)
0.335 (8.51)
0.320 (8.13)
0.130 (3.3)
0.120 (3.05)
45
o
0.386 (9.80)
Dimensions in inches
and (millimeters)
Case Style DFS
7/27/00
0.404 MAX.
(10.26 MAX.)
0.205 (5.2)
0.195 (5.0)
0.047 MIN.
(1.20 MIN.)
0.060 MIN.
(1.52 MIN.)
Ratings and
Characteristic Curves(TA= 25°C unless otherwise noted)
20 40 60 80 100 120 140 160
0
0.5
1.0
110 100
0
5
10
15
20
25
30
0.4 0.6 0.8 1.0 1.2 1.4
0.01
0.1
1
10
020 40 60 80 100
0.01
0.1
1
10
100
110 100
1
10
100
0.01 0.1 110 100
0.1
1
10
100
Fig. 6 - Typical Transient Thermal
Impedance
Fig. 5 - Typical Junction Capacitance
Per Leg
Transient Thermal Impedance (°C/W)
Junction Capacitance (pF)
t, Heating Time (sec.)
Re verse Voltage (V)
TJ = 25°C
f = 1.0 MHz
Vsig = 50mVp-p
1.0 Cycle
60 Hz
Resistive or
Inductive Load
P.C.B mounted on
0.51 x 0.51" (13 x 13mm)
Copper pads
Fig. 3 - Typical Forward Characteristics
Per Leg
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
TJ = 25°C
Pulse width = 300µs
1% Duty Cycle
Fig. 1 - Derating Curve Output
Rectified Current
Average Forward Output Current (A)
Ambient Temperature (°C)
Fig. 2 - Maximum Non-Repetitive Peak
Forward Surge Current Per Leg
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
TJ = 150°C
Single Sine-Wave
(JEDEC Method)
Fig. 4 - Typical Reverse Leakage
Characteristics Per Leg
Instantaneous Reverse Current (A)
Percent of Rated Peak Reverse Voltage (V)
TJ = 125°C
TJ = 50°C
DF005SA thru DF10SA
Miniature Glass Passivated Single-Phase
Surface Mount Bridge Rectifier
