DF005SA thru DF10SA Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier Case Style DFS 0.047 (1.20) 0.040 (1.02) 0.205 (5.2) 0.195 (5.0) Reverse Voltage 50 to 1000V Forward Current 1.0A ct u d ro P New Mounting Pad Layout 0.047 MIN. (1.20 MIN.) Dimensions in inches and (millimeters) 0.404 (10.3) 0.386 (9.80) 0.404 MAX. (10.26 MAX.) 0.335 (8.51) 0.320 (8.13) 45o 0.060 MIN. (1.52 MIN.) 0.255 (6.5) 0.245 (6.2) 0.130 (3.3) 0.120 (3.05) 0.013 (0.330) 0.009 (0.241) 0.205 (5.2) 0.195 (5.0) 0.060 (1.524) 0.040 (1.016) 0.013 (0.330) 0.003 (0.076) Mechanical Data Features Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Mounting Position: Any Weight: 0.04oz., 1.0g Packaging codes/options: 27/1.5K per 13" Reel (16mm Tape) 45/50 EA. per Tube-Bulk * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * This series is UL listed under Recognized Component Index, file number E54214 * Glass passivated chip junctions * High surge overload rating of 30 Amperes peak * Ideal for printed circuit boards * High temperature soldering guaranteed: 260C/10 seconds at 5 lbs. (2.3kg) tension Maximum Ratings and Thermal Characteristics (T A = 25C unless otherwise noted) Parameter Symbol DF005SA DF01SA DF02SA DF04SA DF06SA DF08SA DF10SA Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward output rectified current at TA = 40C (2) IF(AV) 1.0 A Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ = 150C IFSM 30 A I2t 4.5 A2sec RJA RJL 40 15 C/W TJ, TSTG -55 to +150 C Rating for fusing (t < 8.3ms) Typical thermal resistance per leg (2) Operating junction and storage temperature range Electrical Characteristics (T A Unit = 25C unless otherwise noted) Maximum instantaneous forward voltage drop per leg at 1.0A VF 1.1 V Maximum DC reverse current at rated DC blocking voltage per leg IR 5.0 500 A CJ 25 pF Typical junction capacitance per leg(1) TA = 25C TA = 125C Notes: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Units mounted on P.C.B. with 0.51 x 0.51" (13 x 13mm) copper pads 7/27/00 DF005SA thru DF10SA Ratings and Characteristic Curves (T Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier A = 25C unless otherwise noted) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Leg 1.0 30 Peak Forward Surge Current (A) Average Forward Output Current (A) Fig. 1 - Derating Curve Output Rectified Current 60 Hz Resistive or Inductive Load 0.5 P.C.B mounted on 0.51 x 0.51" (13 x 13mm) Copper pads 0 TJ = 150C Single Sine-Wave (JEDEC Method) 25 20 15 10 1.0 Cycle 5 0 20 60 40 80 100 140 120 160 10 1 Instantaneous Reverse Current (A) 10 1 0.1 TJ = 25C Pulse width = 300s 1% Duty Cycle 0.6 0.8 1.0 1.2 Junction Capacitance (pF) 100 10 TJ = 125C 1 0.1 TJ = 50C 0.01 0 1.4 20 80 60 40 100 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (V) Fig. 5 - Typical Junction Capacitance Per Leg Fig. 6 - Typical Transient Thermal Impedance 100 TJ = 25C f = 1.0 MHz Vsig = 50mVp-p 10 1 1 Fig. 4 - Typical Reverse Leakage Characteristics Per Leg Transient Thermal Impedance (C/W) Instantaneous Forward Current (A) Fig. 3 - Typical Forward Characteristics Per Leg 0.01 0.4 100 Number of Cycles at 60 Hz Ambient Temperature (C) 10 Reverse Voltage (V) 100 100 10 1 0.1 0.01 0.1 1 10 t, Heating Time (sec.) 100