LITE-ON SEMICONDUCTOR MBRF1060CT REVERSE VOLTAGE - 60 Volts FORWARD CURRENT - 10 Amperes SCHOTTKY BARRIER RECTIFIERS ITO-220AB FEATURES B M K D PIN 1 2 3 J F G I MECHANICAL DATA Case : ITO-220AB molded plastic Polarity : As marked on the body Weight : 0.06 ounces, 1.7 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) ITO-220AB MIN. MAX. A B C 15.50 10.0 3.00 16.50 10.40 3.50 D E F 9.00 2.90 13.46 G H 1.15 2.40 9.30 3.60 14.22 1.70 A C DIM. E Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency High current capability, low VF High surge capacity Plastic package has UL flammability classification 94V-0 For use in low voltage,high frequency inverters,free whelling,and polarity protection applications H N H L PIN 1 PIN 2 PIN 3 2.70 0.75 1.00 0.45 0.70 3.00 3.30 L 4.36 4.77 M 2.48 2.80 2.80 N 2.50 All Dimensions in millimeter I J K MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward RectifiedCurrent at TC=120 C (See Fig.1) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Peak Repetitive Reverse Current tp=2us, square F=1KHz @TJ=25 C Voltage Rate of Change (Rated VR) Maximum Forward Voltage, (Note 1) @IF=5A TJ =125 C @IF=5A TJ =25 C @IF=10A TJ =125 C Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ =25 C @TJ =125 C Typical Junction Capacitance, per element (Note 2) Typical Thermal Resistance (Note 3) Operating Temperature Range Storage Temperature Range Dielectric Strengh from terminals to case, AC with t=1 minute, RH<30% SYMBOL MBRF1060CT UNIT VRRM VRMS VDC 60 42 60 V V I(AV) 10 A IFSM 125 A IRRM 1 A dv/dt 10000 V/us VF 0.65 0.80 0.90 V IR 0.02 15 mA CJ 220 pF R0JC C/W TSTG 4.0 -55 to +150 -55 to +175 Vdis 2000 V TJ NOTES : 1. 300us Pulse Width, 2% Duty Cycle. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal Resistance Junction to Case. V C C REV. 5, Apr-2011, KTHC50 RATING AND CHARACTERISTIC CURVES MBRF1060CT FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 150 125 12 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 16 100 75 8 50 4 25 RESISTIVE OR INDUCTIVE LOAD 8.3ms Single Half-Sine-Wave 0 0 50 25 75 100 125 150 175 1 2 5 CASE TEMPERATURE , C 50 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.4 - TYPICAL FORWARD CHARACTERISTICS 10000 INSTANTANEOUS FORWARD CURRENT ,(A) 100 TJ = 125 C 1000 100 10 TJ = 25 C 1 10 1 TJ = 25 C PULSE WIDTH 300us 2% Duty cycle 0 0 20 40 60 80 100 0.1 120 0.0 0.2 0.4 FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 100 TJ = 25 C, f= 1MHz 10 0.1 1 0.6 0.8 INSTANTANEOUS FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE ,(%) CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(uA) 20 10 4 10 REVERSE VOLTAGE , VOLTS 100 1.0 Legal Disclaimer Notice MBRF1060CT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.