Transistors
1
Publication date: November 2002 SJC00012BED
2SA1124
Silicon PNP epitaxial planar type
For low-frequency high breakdown voltage amplification
Complementary to 2SC2632
■Features
•Satisfactory forward current transfer ratio hFE collector current IC
characteristics.
•High collector-emitter voltage (Base open) VCEO
•Small collector output capacitance (Common base, input open cir-
cuited) Cob
•Makes up a complementary pair with 2SC2632, which is optimum
for the pre-driver stage of a 40 W to 60 W output amplifier.
■Absolute Maximum Ratings Ta = 25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO −150 V
Collector-emitter voltage (Base open) VCEO −150 V
Emitter-base voltage (Collector open) VEBO −5V
Collector current IC−50 mA
Peak collector current ICP −100 mA
Collector power dissipation PC1W
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
Parameter Symbol Conditions Min Typ Max Unit
Collector-emitter voltage (Base open) VCEO IC = − 0.1 mA, IB = 0 −150 V
Emitter-base voltage (Collector open) VEBO IE = −10 µA, IC = 0 −5V
Collector-base cutoff current (Emitter open)
ICBO VCB = −100 V, IE = 0 −1µA
Forward current transfer ratio *hFE VCE = −5 V, IC = −2 mA 130 330
Collector-emitter saturation voltage VCE(sat) IC = −30 mA, IB = −3 mA −1V
Transition frequency fTVCB = −10 V, IE = 10 mA, f = 200 MHz 200 MHz
Collector output capacitance Cob VCB = −10 V, IE = 0, f = 1 MHz 5 pF
(Common base, input open circuited)
Noise voltage NV VCE = −10 V, IC = −1 mA, GV = 80 dB 150 300 mV
Rg = 100 kΩ, Function = FLAT
■Electrical Characteristics Ta = 25°C ± 3°C
Unit: mm
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Rank classification
5.9
±0.2
0.7
±0.1
4.9
±0.2
8.6
±0.2
0.7
+0.3
–0.2
13.5
±0.5
2.54
±0.15
(3.2)
(1.27)(1.27)
0.45
+0.2
–0.1
0.45
+0.2
–0.1
132
1 : Emitter
2 : Collector
3 : Base
EIAJ : SC-51
TO-92L-A1 Package
Rank R S
hFE 130 to 220 185 to 330
This product complies with the RoHS Directive (EU 2002/95/EC).
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
2SA1124
2SJC00012BED
VCE(sat) IChFE ICfT IE
PC TaIC VCE IC VBE
Cob VCB
0 16040 12080 14020 10060
0
1.2
1.0
0.8
0.6
0.4
0.2
Collector power dissipation PC (W)
Ambient temperature Ta (°C)
0−12−10−8−2−6−4
0
−80
−60
−20
−50
−70
−40
−10
−30
T
a
= 25°C
−100 µA
−150 µA
−200 µA
−250 µA
−300 µA
−350 µA
−400 µA
−450 µA
−50 µA
I
B
= −500 µA
Collector current IC (mA)
Collector-emitter voltage VCE (V)
0−2.0−1.6− 0.4 −1.2− 0.8
0
−120
−100
−80
−60
−40
−20
V
CE
= −5 V
T
a
= 75°C−25°C
25°C
Base-emitter voltage VBE (V)
Collector current IC (mA)
− 0.1 −1−10 −100
− 0.01
− 0.1
−1
−10
−100 I
C
/ I
B
= 10
T
a
= 75°C
25°C
−25°C
Collector-emitter saturation voltage V
CE(sat)
(V)
Collector current I
C
(mA)
− 0.1 −1−10 −100
0
600
500
400
300
200
100
V
CE
= −5 V
T
a
= 75°C
25°C
−25°C
Forward current transfer ratio hFE
Collector current IC (mA)
1 10 100
0
300
250
200
150
100
50
V
CB
= −10 V
T
a
= 25°C
Transition frequency f
T
(MHz)
Emitter current I
E
(mA)
−1−10 −100
0
6
5
4
3
2
1
IE = 0
f = 1 MHz
Ta = 25°C
Collector-base voltage VCB (V)
Collector output capacitance
(Common base, input open circuited) Cob (pF)
This product complies with the RoHS Directive (EU 2002/95/EC).
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
