June 2013 Passive components sales offices Head office Philippines Plant (Philippines) Block No.5, Calamba Premiere International Park, Batino, Calamba, Laguna, Manila, Philippines 4027 Te l:+63 - 49- 545- 0422 E-mail:donna@samsung.com 206, Cheomdansaneop Road, Yeongtong-gu, Suwon-city, Gyeonggi province, Korea, 443- 743 Europe Te l:+82- 31- 210 - 6328 E-mail:james.pyun@samsung.com America Te l:+82- 31- 210 - 6803 E-mail:wesley.roh@samsung.com Asia Te l:+82 - 31- 210 - 6791 E-mail:peter_kim@samsung.com Domestic Te l:+82- 31- 210 - 5074 E-mail:boungho.lee@samsung.com Manufacturing sites Suwon Plant (Korea) 206, Cheomdansaneop Road, Yeongtong-gu, Suwon-city, Gyeonggi province, Korea, 443- 743 Te l:+82-31-210-5074 E-mail:boungho.lee@samsung.com Busan Plant (Korea) 1623 - 2, Songjeong- dong, Gangseo- gu, Busan, Korea, 618 - 270 Te l:+82- 51- 970 - 7671 E-mail:kyc.kweon@samsung.com Tianjin Plant (China) 27, Heiniucheng- Road, Hexi District, Tianjin, 300210 China Te l:+86 - 22 - 2397- 9000(310) E-mail:moohantop.Park@samsung.com High Tech (China) Xiqing Dist. Micro-Electronics Industrial Park, Jingang Highway, Tianjin, China 300485 Tel:+ 022- 23979000- 313 E-mail: enhao.song@samsung.com Binhai Plant(China) 80, XiaQing Road, West area of BinHai development zone, TianJin, 300458, China Te l:+86- 22- 6686- 3333(1300) E-mail:sk1000.kim@samsung.com Asia sales offices Irvine Office 3333 Michelson Drive, Suite 500, Irvine, CA 92612, USA Tel: 1-949-797-8016 E-mail: andrew.skelly@samsung.com Shenzhen Office 46 F, New World Center, Yitian Road, Futian District, Shenzhen, 518026 China Te l:86 - 755 - 8608- 5571 E-mail:jackson.xian@samsung.com Shanghai Office Rm. 1211, Shanghai International Trade Center, No. 2201 Yan an(W) Rd., Shanghai, 200335 China Te l:86 - 21- 6270 - 4168(274) E-mail:dennis.cha@samsung.com HongKong Office 8/F.,Central Plaza, 18 Harbour Road, Wanchai, Hongkong, China Te l:852-28626344 E-mail:vivianchan@samsung.com Qingdao Office Rm 1201. Growne Plaza Qingdao 76, Xiang Gang Zhong Rd, Qingdao, 266071 China Te l:86 - 532 - 85779102 E-mail:zhengguo.cui@samsung.com Taiwan Office 9F - 1, Np. 399 Ruey Kuang Rd., Neihu District, Taipei City, Taiwan, 114 Te l:886 - 2 - 2656 - 8356 E-mail:kevin0130.wang@samsung.com Singapore Office 3 Church Street Samsung Hub, #23-02 Singapore 049483 Te l:65-6833 - 3228 E-mail:winson.yeong@samsung.com America sales office Europe sales offices Frankfurt Office Samsung Haus, Am Kronberger Hang 6, D-65824 Schwalbach/Ts. Germany Te l:49 - 6196 - 66 - 7255 E-mail:frank.goebel@samsung.com Hungary Office H-2310, Leshegy utca 2-4, Szigetszentmiklos, Pest megye, Hungary Te l:36 - 24 - 551- 148 E-mail:jun21c.lee@samsung.com Domestic Distributors Korchip Corporation 817-38, Anyang 2- dong, Manan- gu, Anyang-city, Gyeonggi province, Korea, 430-812 Te l:+82 - 31- 361- 8100 E-mail:itasap@korchip.com SAMT Daekyung Bldg., 983-10, Daechi-dong, Gangnam-gu, Seoul, Korea Te l:+82- 2- 3458- 9000 E-mail:info@isamt.com CHUNGMAC 301 Gwonseon Medivill, 544-14 Gokbanjeong-dong, Gwonseon-gu, Suwon-si, Gyeonggi-do Korea Te l:+82- 31- 234- 2367~8 E-mail:webmaster@chungmac.co.kr YOUNGDUK Gasan-Dong 632, Seobusaetgil, Geumcheon-Gu, Seoul, Korea Te l:+82- 2- 2107- 7860 E-mail:siyang1109@gmail.com Bangkok Office 23rd Floor, Lake Rajada Office Complex 193/89 Rachadapisek Road, Khet Klongtoey, Bangkok 10110, Thailand Te l:66 - 2- 661- 8004~5 E-mail:yangshin.yi@samsung.com All information indicated in this catalog is as of June 2013 * The specifications and designs contained herein may be subject to change without notice. CONTENTS We, Samsung, declare that our component Chip Resistor is produced in accordance with EU RoHS directive. 1. RoHS Compliance and restriction of Br The following restricted materials are not used in packaging materials as well as products in compliance with the law and restriction. - Cd, Pb, Hg, Cr+6, As, Br and the compounds, PCB, asbestos - Bromic materials : PBBs, PBBOs, PBDO, PBDE, PBB 2. No use of materials breaking Ozone layer The following ODS materials are not used in our fabrication process. - ODS material : Freon, Haron, 1-1-1 TCE, CCl4, HCFC If you want more detailed Information,Please Visit Samsung Electro-mechanics Website [http://www.sem.samsung.com, http://www.semlcr.com] Operation Notes 4 Operation Notes Example of Land Pattern Design 5 Example of land Pattern Design Recommended Soldering Conditions 6 Recommended Soldering Conditions General Structure 7 General Structure General 8 General Precision 10 Precision Jumper 12 Jumper Low ohms(RUT Series) 14 Low ohms (RUT Series) Ultra Low Ohms(RU Series) 16 Ultra Low ohms (RU Series) Ultra Low Ohms(RUK Series) 18 Ultra Low Ohms (RUK Series) Ultra Low Ohms(RJ Series) 20 Ultra Low Ohms (RJ Series) Arrays(CONVEX Type) 22 Arrays (CONVEX Type) Arrays(CONCAVE Type) 24 Arrays (CONCAVE Type) Arrays(FLAT Type) 26 Arrays (FLAT Type) Anti-Sulfur Resistors 28 Anti-Sulfur Resistors Attenuator 30 Attenuator Characteristics Performance 32 Characteristics Performance Packaging 34 Packaging Standard Resistance Value 36 Standard Resistance Value Example of Land Pattern Design Operation Notes Applications *Chip resistors are designed for general electronic devices such as home appliances, computer, mobile communications, digital circuit, etc. If you require our products with high reliability-performing at more than 125 or below -55- for medical equipments, aircrafts, high speed machines, military usage, and items that can affect human life or if you need to use in specific conditions (corrosive gas atmosphere like H2S etc.), please contact us beforehand. *Normal operation temperature ranges (): -55~+155 *Others (rectangular, array_Flat type, trimmable) : -55~+125 *Although resistor body is coated, sharp excessive impact should be avoided to prevent damages and adverse effects on characteristics (resistor value, open circuited, T.C.R.). Mounting Please give more attention not to press the chip owing to the nozzle's improper height when it is mounted on PCB. (Excessive pressure may cause exterior damage, change in resistance, circuit open, etc.) Safety precautions *These products are designed and produced for applying to the ordinary electronic equipments. (AV equipment, OA equipment,Telecommunication equipment, etc) *Consult with our sales department before applying in the devices that require extremely high reliability such as medical equipments, transport equipments, aircrafts/spacecrafts, nuclear power controllers, fuel controllers, car equipments including car accessories and other safety devices. *Following special environments, and such environmental conditions may affect the performance of the product. Please verify the performance and reliability thoroughly prior to use. a) Using in various type of Liquid including water, oil, organic solvent and other chemicals. b) Using in the places where the products are exposed to direct sunlight, sea wind, corrosive gases (including Cl2, H2S, NH3, SO2, NO2), static electricity, electromagnetic waves and dusty air. c) Using close to heat generating components or other flammable items. d) Using in the places that is sealed or coated with resins or other coating materials after soldering. e) Using in places subject to dew condensation. *These products are not radiation resistant. *The company is not responsible for any problems resulting from using of the products under the conditions not recommended herein. *The company should notify any safety issues of the products to the customer. And the safety of the products should be monitored by the customer periodically. Storage To maintain proper quality of chip components, the following precautions are required for storage environment, method and period. *Storage Environment - Make sure that the ambient temperature is within 5~40 and the ambient humidity is within 20~70%RH. - Chip components may be deformed, if the temperature of packaged components exceeds 40. - Do not store where the soldering properties can be deteriorated by harmful gas such as sulphurous gas, chlorine gas, etc. - Bulk packed chip components should be used as soon as the seal is opened, thus preventing the solderability from deteriorating. - The remaining unused chips should be put in the original bag and sealed again or store in a desiccator containing a desiccating agent. *Storage Time Period Stored chip components should be used within 6 months after receiving the components. If 6 months or more have elapsed, please check the solderability before actually using. Cleaning After Soldering Cleaning, soldering flux & Ionic cleaning liquid should be avoided on product. If any possibility on product, please take a test before usage. Caution for Chip Resistor Seperation from PCB. Chip resistor installation on PCB is a similar phenomenon on to a chocolate chip on top of a cake. PCB has enough flexibility on outer force but Chip resistor can be defected without any bending. (By chip resistor use of Ceramic, solder, metal) Therefore, when separating a Chip resistor from a PCB, beware of any crack on the chip. Example of Land Pattern Design When designing P.C.B, the shape and size of the solder lands must allow a proper amount of solder to form under the resistor. The amount of solder formed at the end terminations has direct effect on the possibility of chip crack. The more the amount of solder and stress, the more the possibilities of chip crack. Operation Notes Example of land Pattern Design For Chip Type Recommended Soldering Conditions : Land Pattern C General Structure : Chip Resistor *Reflow soldering General B A (UNIT: mm) A *Reflow soldering(RU,RUW,RUK) (UNIT: mm) *Flow soldering (UNIT: mm) C Type A B 2A+B C Type A B 2A+B C 0.54 0.18 1005 0.8 0.5 2.1 0.5 1005 0.7 0.5 1.9 0.5 0.28 1.02 0.29 1608 0.8 0.5 2.1 0.8 1608 0.9 0.8 2.6 0.8 0.6 0.5 1.7 0.5 2012 0.9 0.8 2.6 1.2 2012 1.0 1.4 3.4 1.3 1608 0.8 0.8 2.4 0.8 3216 1.7 1.2 4.6 1.4 3216 1.4 1.8 4.6 1.6 2012 0.9 1.4 3.2 1.2 3225 1.7 1.2 4.6 2.6 3225 1.4 1.8 4.6 2.6 3216 1.3 1.8 4.4 1.5 5025 2.15 1.8 6.1 2.6 5025 1.5 3.3 6.3 2.5 3225 1.3 1.8 4.4 2.4 6432 2.3 3.0 7.6 3.3 6432 1.5 4.6 7.6 3.2 5025 1.4 3.3 6.1 2.4 6432 1.4 4.6 7.4 3.0 Type A B 2A+B 0402 0.17 0.20 0603 0.37 1005 Low ohms (RUT Series) Ultra Low ohms (RU Series) Ultra Low Ohms (RUK Series) Arrays (CONVEX Type) For Array Type *Convex type *Concave type P2 P1 Arrays (CONCAVE Type) P E E Arrays (FLAT Type) D Anti-Sulfur Resistors : Land Pattern D Others *Do not use more than rated voltage. (Please check the contents of each product) Jumper Ultra Low Ohms (RJ Series) : Chip Resistor *Manual work Whenever separating chip resistor from PCB, do not re-use the chip resistor for circuit safety. Electrical specification of chip resistors can be changed by soldering iron after separation. Re-use of separated chip resistor should be prohibited. Precision Attenuator B A A C B C (UNIT: mm) Type A B C D E P1 062P 0.20 0.20 0.30 0.30 0.30 064P 0.20 0.20 0.20 0.30 0.30 10AT 0.4 0.4 0.25 0.5 0.5 0.65 102P 0.4 0.4 0.25 0.5 0.5 0.65 104P 0.7 0.3 0.2 0.5 0.5 0.55 0.5 164P 0.7 0.5 0.3 0.9 0.8 0.9 0.8 (UNIT: mm) P2 Type A B C D E P 0.6 - 102P 0.3 0.3 0.2 0.5 0.4 0.5 0.5 0.5 104P 0.3 0.3 0.2 0.5 0.4 0.5 - Characteristics Performance Packaging Standard Resistance Value *This is the recommended land pattern for designing PCB. This pattern does not guarantee any characteristic of other product. The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 4 5 Recommended Soldering Conditions General Structure Abstract Reflow Soldering *There are 3 soldering methods. - Flow(wave) soldering. - Reflow soldering. (Reflow soldering is broadly divided into the total heating method and local heating method.) - Iron soldering. Wave Soldering Single Wave Double Waves Total Heating *Standard Reflow Soldering Condition Soldering must be carried out without exceeding the approved soldering temperature and time shown within the shaded area of the right graph. This prevents the terminations from leaching and characteristics from deteriorating. When soldering is repeated, the allowed time is the accumulated time. Infrared Ray Convection/Infrared Hot Air Hot Plate Reflow Soldering Soldering Methods *Pre-heating and cooling In the reflow soldering method, a full pre-heating at the proper temperature is necessary to dry and activate solder paste. Tomb-stoning can be reduced by preheating at 150~180 for more than 1 minute. Also when cooling is done by dipping into solvent, care should be taken to keep the temperature difference within 150. Local Heating Since Chip resistors come into direct contact with melted solder during soldering, it is exposed to potential mechanical stress caused by the sudden temperature change. The chip resistors may also be subject to silver migration and flux contamination. Flow(wave) Soldering *Features PCB solder Primary wave Secondary wave *Preheating If a chip component is heated suddenlyduring soldering, it may crack by the thermal shock caused by the temperature difference between the surface and the inside of the chip. To prevent this, a full preheating is necessary. In case of wave soldering, the temperature difference between solder and surface of the component should be kept within 150. Also when cooling is done by dipping into solvent, care should be taken to keep the temperature difference within 150. *Standard Soldering Condition Soldering must be carried out without exceeding the approved soldering temperature and time shown within the shaded area of the graph at right. An excessively long soldering time or high soldering temperature results in leaching of outer terminations. When a PCB is warped, mechanical stress applied to the chip will be increased and might cause chip crack, especially if there is a big amount of solder on the chip. So, care should be taken not to use excessive amount of solder on the PCB. For the flow(wave) soldering, the solder amount can be controlled by land size. There are two types of soldering methods in flow(wave) soldering. One is single wave soldering, and the other is a double waves soldering. However, double waves soldering is mainly used. This method is designed for continuous and multiple dipping process by using primary and secondary wave, having completely different waveforms and characteristics. With the primary wave, a comparatively strong jet flow is used to remove the flux gas and to solder. With the secondary wave, it is used to remove excessive solder. With the primary wave, the solder flows into a very small gap between components and air bubbles remaining on the soldered joint are removed. With the secondary wave, the peel back is used to prevent bridging. 2605 5 sec. max. Pre-heating Soldering Temp.() Gradual Cooling in the air 217 Gradual Cooling in the air T ()1206(3216) and below :150 max. Operation Notes Example of land Pattern Design 200 150 Recommended Soldering Conditions General Structure Time(sec.) < Reflow Soldering> Laser Optical Beam Air Heater Iron Soldering 2605 10 sec. max. Pre-heating Soldering Temp.() *Standard solder amount When a PCB is warped, mechanical stress applied to the chip should be reduced, and to do so, care should be taken not to use excessive amount of solder on the PCB. In the case of the reflow method, the thickness of the coated solder paste is controlled to prevent excessive solder. The thickness of solder paste should be 100~300. General *Tombstoning and Prevention When reflow soldering, or especially vapor phase soldering (VPS), small chip components of less than RC3216 type may break away from solder and stand on end. This is commonly known as tombstoning or the Manhattan phenomenon. Jumper - Preventing tombstoning Keep land size as small as possible. Keep the pre-heating conditions properly ( Pre-heating temperature : 150 ~ 180, Pre-heating time : more than 1 min.) Keep the solder paste quantity not too much and uniform for every lands. Keep the position of chips properly. At around the soldering temperature, keep minimum difference of the temperature between the electrodes of a chip. Precision Low ohms (RUT Series) Ultra Low ohms (RU Series) Ultra Low Ohms (RUK Series) Ultra Low Ohms (RJ Series) Iron Soldering When using a soldering iron or any other soldering operation, the permissible temperature and time should not exceed that of the reflow soldering. In order to prevent the external terminations from leaching and characteristics from deteriorating, the tip of the soldering iron should not touch the chip component (ceramic element, resin case, etc.). Soldering with a soldering iron and correcting with a soldering iron can be performed right under following conditions. Item Condition Temperature at tip Soldering iron output End of soldering iron Note 350 Max. 20-Watt Max. O3mm Max. Do not directly touch the chip by the tip of the iron. Arrays (CONVEX Type) Arrays (CONCAVE Type) Arrays (FLAT Type) Anti-Sulfur Resistors Attenuator Pre-heating Temp.() General Structure of the Chip Resistor Time(sec.) 120 sec. min. < Flow Soldering> Characteristics Performance Name Main Substance Ceramic Substrate Inner Electrode Resistor Glass Coat Protective Coat Terminal Coat Ni Plate Sn Plate Al2 O 3 Ag RuO2 Bi2O3, SiO2 Polymer / Glass Ni-Cr Alloy /Ag Ni Sn No. The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. Packaging Standard Resistance Value 6 7 General Feature Specification *Very small, thin, and light weight. *Both flow and reflow soldering are applicable. *Very low inductance. *Suitable size and packaging for surface mount assembly. * Lead-free terminal. *PbO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exemption. Power Rating (W) Type Application *General purpose. *Home Appliances. (DVD, Digital TV, Digital Camera, Audio, Tunner). *For Computers & Communications. (Notebook, Memory Module, Mobile, Network Equipment, etc). Working Overload Voltage Voltage (MAX) (MAX) RC 0402 1/32 15(V) 30(V) RC0603 RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 1/20 1/16 1/10 1/8 1/4 1/3 2/3 1 25(V) 50(V) 50(V) 100(V) 150(V) 300(V) 200(V) Resistance Range () TCR (ppm/) 1~99: 300 100~1 : 250 Rated Working Temperature Rated Ambient Temperature 1~1 1~9.9:+300,-200 10~1 :100 (0603: 250) 1.1 ~10 :300 -55~+125 Operation Notes Example of land Pattern Design Recommended Soldering Conditions 70 1~10 -55~+155 General Structure 400(V) General *Rated voltage (V) = Rated power(W)xNominal resistance value () Rated voltage should be lower than (MAX) working voltage. Precision Structure and Dimensions Power Derating Curve 103 Jumper The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. (The load current shall be derated according to derating curve in case of the 'Jumper') W H <1005, 1608, 2012, 3216, 3225, 5025, 6432> <0402, 0603> <Side View> (UNIT: mm) Type Inch L W H I1 I2 Average Weight RC0402 RC0603 RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 01005 0201 0402 0603 0805 1206 1210 2010 2512 0.400.02 0.600.03 1.000.05 1.600.10 2.000.15 3.200.15 3.200.20 5.000.20 6.300.20 0.200.02 0.300.03 0.500.05 0.800.10 1.250.15 1.600.15 2.550.20 2.500.20 3.200.20 0.130.02 0.230.03 0.350.05 0.450.10 0.500.10 0.550.10 0.550.10 0.550.10 0.550.10 0.100.03 0.100.05 0.200.10 0.300.20 0.400.20 0.450.20 0.450.20 0.600.20 0.600.20 0.100.03 0.150.05 0.250.10 0.350.10 0.350.20 0.400.20 0.400.20 0.600.20 0.600.20 0.04 0.15 0.6 2.1 4.9 9.5 16 26 41 Parts Numbering System *The part number system shall be in the following format RC Code Designation RC: Chip Resistor 2012 Dimension & Size Code 0402: 0.4x0.2() - 01005(inch) 0603: 0.6x0.3() - 0201(inch) 1005: 1.0x0.5() - 0402(inch) 1608: 1.6x0.8() - 0603(inch) 2012: 2.0x1.2() - 0805(inch) 3216: 3.2x1.6() - 1206(inch) 3225: 3.2x2.5() - 1210(inch) 5025: 5.0x2.5() - 2010(inch) 6432: 6.4x3.2() - 2512(inch) J Tolerance F : 1% G : 2% J : 5% K : 10% 100 Resistance Value 3 or 4 digits coding system (IEC coding system) 3digits (E-24 series) 4digits (E-96 series) CS Packaging Code GS: Bulk Packaging CS: Tape Packaging 7" ES: Tape Packaging 10" AS: Tape Packaging 13" Percentage of the rated dissipation(%) <Top View> Percentage of the rated dissipation(%) I2 L 80 60 Operation area 40 20 0 Ultra Low ohms (RU Series) 100 100 l1 Low ohms (RUT Series) 70 -55 -40 0 40 Marking Ultra Low Ohms (RJ Series) Operation area 40 Arrays (CONVEX Type) 20 0 155 70 -55 -30 0 30 60 90 120 150 Ambient Temperature() *4 digits indication (E-96 series) - Left 2 digits represent significant figures. - Last 1 digit represents exponential number of 10. - Example: 103 Left 2 digits: 10 Last 1 digit: 3 103 = 10x10 3 = 10000=10k - Left 3 digits represent significant figures. - Last 1 digit represents exponential number of 10. - Example: 1002 Left 3 digits: 100 Last 1 digit: 2 1002 = 100x10 2 = 10000=10k 1002 *0603, 1005 type: No marking. *0603, 1005, 1608 type: No marking. E-96 E-24 E-96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 10 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 11 12 13 15 16 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. E-24 18 20 22 24 27 30 E-96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 E-24 33 36 39 43 47 51 Arrays (CONCAVE Type) Arrays (FLAT Type) IEC Code System (E-96, E-24) *3 digits indication (E-24 series) 103 60 125 80 120 Ambient Temperature() Ultra Low Ohms (RUK Series) 80 E-96 E-24 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 56 Anti-Sulfur Resistors Attenuator 62 68 Characteristics Performance Packaging 75 82 Standard Resistance Value 91 8 9 Precision Feature Specification *Low tolerance (0.5%). *Both flow and reflow soldering are applicable. *Suitable size and packaging for surface mount assembly. *Very low inductance. * Lead-free terminal. *PbO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exemption. RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 Application *Circuit for high precision resistance and reliability. *For signal control part. *For tunning circuit. Working Overload Voltage Voltage (MAX) (MAX) Power Rating (W) Type 1/16 1/10 1/8 1/4 1/3 2/3 1 50(V) 100(V) 150(V) 300(V) 200(V) 400(V) Rated Working Temperature Rated Ambient Temperature Resistance Range () TCR (ppm/) Operation Notes Example of land Pattern Design 1~9.9:300 10~1 :100 1.1 ~10 :300 70 1~10 -55~+155 Recommended Soldering Conditions General Structure *Rated voltage (V) = Rated power(W)xNominal resistance value () Rated voltage should be lower than (MAX) working voltage. General Structure and Dimensions l1 The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. W <1005, 1608, 2012, 3216, 3225, 5025, 6432> H 100 I2 L <Top View> <Side View> (UNIT: mm) Type Inch L W H I1 I2 Average Weight RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 0402 0603 0805 1206 1210 2010 2512 1.000.05 1.600.10 2.000.15 3.200.15 3.200.20 5.000.20 6.300.20 0.500.05 0.800.10 1.250.15 1.600.15 2.550.20 2.500.20 3.200.20 0.350.05 0.450.10 0.500.10 0.550.10 0.550.10 0.550.10 0.550.10 0.200.10 0.300.20 0.400.20 0.450.20 0.450.20 0.600.20 0.600.20 0.250.10 0.350.10 0.350.20 0.400.20 0.400.20 0.600.20 0.600.20 0.6 2.1 4.9 9.5 16 26 41 Percentage of the rated dissipation(%) 1002 Marking Power Derating Curve 80 60 Operation area 40 *3 digits indication (E-24 series) *4 digits indication (E-96 , E-192 series) - Left 2 digits represent significant figures. - Last 1 digit represents exponential number of 10. - Example: 103 Left 2 digits: 10 Last 1 digit: 3 103 = 10x10 3 = 10000=10k - Left 3 digits represent significant figures. - Last 1 digit represents exponential number of 10. - Example: 1002 Left 3 digits: 100 Last 1 digit: 2 1002 = 100x10 2 = 10000=10k 103 1002 20 0 -55 70 -30 0 30 60 155 90 120 150 Ambient Temperature() Precision *1005 type: No marking. Jumper Low ohms (RUT Series) Ultra Low ohms (RU Series) Ultra Low Ohms (RUK Series) Ultra Low Ohms (RJ Series) Arrays (CONVEX Type) *1005, 1608 type: No marking. Arrays (CONCAVE Type) Significant Figure of Resistance Value Arrays (FLAT Type) E192 E96 E24 E192 E96 E24 E192 E96 E24 E192 E96 E24 E192 E96 E24 E192 E96 E24 E192 E96 E24 E192 E96 E24 Parts Numbering System *The part number system shall be in the following format RC Code Designation 1005 Dimension & Size Code RC: Chip Resistor 1005: 1.0x0.5() - 0402(inch) 1608: 1.6x0.8() - 0603(inch) 2012: 2.0x1.2() - 0805(inch) 3216: 3.2x1.6() - 1206(inch) 3225: 3.2x2.5() - 1210(inch) 5025: 5.0x2.5() - 2010(inch) 6432: 6.4x3.2() - 2512(inch) D Tolerance D : 0.5% 1002 Resistance Value 3 or 4 digits coding system (IEC coding system) 3digits (E-24 series) 4digits (E-96 , E-192 series) CS Packaging Code GS: Bulk Packaging CS: Tape Packaging 7" ES: Tape Packaging 10" AS: Tape Packaging 13" 100 101 102 104 105 106 107 109 110 111 113 114 115 117 118 120 121 123 124 126 127 129 130 132 100 10 102 105 107 110 11 113 115 118 12 121 124 127 130 13 133 135 137 138 140 142 143 145 147 149 150 152 154 156 158 160 162 164 165 167 169 172 174 176 133 137 140 143 147 150 15 154 158 16 162 165 169 174 178 180 182 184 187 189 191 193 196 198 200 203 205 208 210 213 215 218 221 223 226 229 232 234 178 18 182 187 191 196 200 20 205 210 215 221 226 232 22 237 240 243 246 249 252 255 258 261 264 267 271 274 277 280 284 287 291 294 298 301 305 309 312 237 24 243 249 255 261 267 27 274 280 287 294 301 309 30 316 320 324 328 332 336 340 344 348 352 357 361 365 370 374 379 383 388 392 397 402 407 412 417 316 324 332 33 340 348 357 36 365 374 383 392 402 412 39 422 427 432 437 442 448 453 459 464 470 475 481 487 493 499 505 511 517 523 530 536 542 549 556 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 422 432 43 442 453 464 47 475 487 499 511 523 536 549 51 562 569 576 583 590 597 604 612 619 626 634 642 649 657 665 673 681 690 698 706 715 723 732 741 562 56 576 590 604 619 62 634 649 665 681 698 715 732 68 750 759 768 777 787 796 806 816 825 835 845 856 866 876 887 898 909 920 931 942 953 965 976 988 750 75 Anti-Sulfur Resistors 768 Attenuator 787 806 825 82 Characteristics Performance 845 Packaging 866 Standard Resistance Value 887 909 91 931 953 976 10 11 Jumper Feature Parts Numbering System *Very small, thin, and light weight. *Both flow and reflow soldering are applicable. *Very low inductance. *Suitable size and packaging for surface mount assembly. *100 % Lead-free product(Except RP series). *The part number system shall be in the following format *General purpose. *Home Appliances. (DVD, Digital TV, Digital Camera, Audio, Tunner). *For Computers & Communications. (Notebook, Memory Module, Mobile, Network Equipment, etc). CS Packaging Code 000 Resistance Value GS: Bulk Packing CS: Tape & Reel 7" E S:Tape & Reel 10" AS:Tape & Reel 13" Jumper: 000 J : Max 50 Recommended Soldering Conditions General Structure General Precision 000 W A1 A2 I1 A1 P I2 P A2 L L <RM Series> <RK Series> 000 W W L L (UNIT: mm) Inch L W H A1 A2 I1 I2 P RC0402 RC0603 RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 RP102P RP104P RP164P RN102P RN104P RM102P RM104P RK102P RK104P RF062P RF064P RM062P RM064P 01005 0201 0402 0603 0805 1206 1210 2010 2512 0402x2R 0402x4R 0603x4R 0402x2R 0402x4R 0402x2R 0402x4R 0402x2R 0402x4R 0201x2R 0201x4R 0201x2R 0201x4R 0.400.02 0.600.03 1.000.05 1.600.10 2.000.15 3.200.15 3.200.20 5.000.20 6.300.20 1.000.10 2.000.10 3.200.10 1.000.10 2.000.10 1.000.10 2.000.10 1.000.10 2.000.10 0.800.05 1.400.05 0.800.05 1.400.05 0.200.02 0.300.03 0.500.05 0.800.10 1.250.15 1.600.15 2.550.20 2.500.20 3.200.20 1.000.10 1.000.10 1.600.10 1.000.10 1.000.10 1.000.10 1.000.10 1.000.10 1.000.10 0.600.05 0.600.05 0.600.05 0.600.05 0.130.02 0.230.03 0.350.05 0.450.10 0.500.10 0.550.10 0.550.10 0.550.10 0.550.10 0.350.10 0.350.10 0.500.10 0.350.10 0.400.10 0.350.10 0.450.10 0.350.10 0.450.10 0.230.10 0.230.10 0.230.10 0.230.10 0.330.10 0.400.15 0.600.15 0.300.10 0.300.10 0.300.10 0.300.10 0.300.10 0.300.10 0.200.10 0.200.10 0.200.10 0.200.10 0.300.15 0.400.15 0.300.10 0.300.10 0.300.10 0.200.10 0.200.10 0.100.03 0.100.05 0.200.10 0.300.20 0.400.20 0.450.20 0.450.20 0.600.20 0.600.20 0.200.10 0.150.10 0.300.15 0.150.10 0.150.10 0.150.10 0.150.10 0.100.10 0.100.10 0.100.10 0.100.10 0.100.03 0.150.05 0.250.10 0.350.10 0.350.20 0.400.20 0.400.20 0.600.20 0.600.20 0.250.10 0.250.10 0.300.15 0.250.15 0.250.15 0.250.15 0.250.15 0.250.15 0.250.15 0.200.10 0.200.10 0.200.10 0.200.10 0.650.10 0.500.15 0.800.15 0.500.10 0.500.10 0.500.10 0.500.10 0.500.10 0.500.10 0.500.05 0.400.05 0.500.05 0.400.05 0.04 0.15 0.6 2.1 4.9 9.5 16 26 41 1.1 2.2 8.9 1.2 2.8 1.2 2.8 1.2 2.8 0.3 0.5 0.3 0.5 Current Rating Rated Ambient Temperature Rated Working Temperature Marking 50 max 0.5 (A) 70 -55 ~ +125 X 50 max 1.0 (A) 70 -55 ~ +155 X Low ohms (RUT Series) O Ultra Low ohms (RU Series) 50 max -55 ~ +155 70 2.0 (A) 50 max 1.0 (A) 70 -55 ~ +155 X O O 50 max 1.0 (A) 70 -55 ~ +155 X 50 max 1.0 (A) 70 -55 ~ +155 50 max 1.0 (A) 70 -55 ~ +155 50 max 0.5 (A) 70 -55 ~ +125 X 50 max 0.5 (A) 0.5 (A) 70 -55 ~ +125 X Jumper Ultra Low Ohms (RUK Series) Ultra Low Ohms (RJ Series) Arrays (CONVEX Type) X O X O Arrays (CONCAVE Type) Arrays (FLAT Type) Anti-Sulfur Resistors Power Derating Curve The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. (The load current shall be derated according to derating curve in case of the 'Jumper') Characteristics Performance 100 80 60 Operation area 40 20 0 Attenuator <1005~6432, 1005 Array, 1608 Array> <0402, 0603, 0603 Array> 100 Percentage of the rated dissipation(%) Type Average Weight Resistance RC0402 RC0603 RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 RP102P RP104P RP164P RN102P RN104P RM102P RM104P RK102P RK104P RF062P RF064P RM062P RM064P W W 000 H Type <RN Series> <RP Series> Percentage of the rated dissipation(%) <RC Series> -55 70 -40 Operation Notes Example of land Pattern Design Jumper Resistors Structure and Dimensions L J Tolerance 0402: 0.4x0.2() - 01005(inch) 0603: 0.6x0.3() - 0201(inch) 1005: 1.0x0.5() - 0402(inch) R C: General R P : Convex Array 1608: 1.6x0.8() - 0603(inch) RN : Concave Array 2012: 2.0x1.2() - 0805(inch) 3216: 3.2x1.6() - 1206(inch) RM: Inverted Array 3225: 3.2x2.5() - 1210(inch) RK : Inverted Short- 5025: 5.0x2.5() - 2010(inch) free Array 6432: 6.4x3.2() - 2512(inch) R F : Flat Array 102P: 1.0x1.0() - 0404(inch) 104P: 2.0x1.0() - 0804(inch) 164P: 3.2x1.6() - 1206(inch) Application 000 2012 Dimension & Size Code RC Code Designation 0 40 80 60 Standard Resistance Value Operation area 40 20 125 80 120 Ambient Temperature() Packaging 0 70 -55 -30 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 0 30 60 155 90 120 150 Ambient Temperature() 12 13 Low Ohms(RUT Series) Feature Specification *Under 1 ohms, precision resistance. *Both flow and reflow soldering are applicable. *High Power with Low TCR. *100% Lead Free Products (PbO not used). *RoHS Complaint. Application *Current Sensing. *PCM of Battery Pack. *Power supplying part, DC power charger, adapter. *Mobile Phone, HDD, DSC, LCD. Type Power Rating (W) RUT1005 1/10 Working Current (A, MAX) TCR (ppm/) Resistance Range () Rated Rated Working Ambient Temperature Temperature Operation Notes (0.1) Example of land Pattern Design 1/8 RUT1608 (0.125) RUT2012 (0.25) RUT3216 (0.33) RUT3225 (0.50) RUT5025 (0.66) RUT6432 (1.0) 1/4 (P/R) 1/3 150 0.1~0.98 70 -55~+155 Recommended Soldering Conditions 1/2 General Structure 2/3 1 General *Rated Current (A) = Rated power(W)/Nominal resistance value () Rated Current should be lower than (MAX) working Current. Structure and Dimensions Power Derating Curve l1 W H <Side View> (UNIT: mm) Inch L W H Average Weight I1 I2 0.6 RUT1005 0402 1.000.05 0.500.05 0.350.05 0.200.10 0.250.10 RUT1608 0603 1.600.10 0.800.10 0.450.10 0.300.20 0.350.10 2.1 RUT2012 0805 2.000.15 1.250.15 0.500.10 0.400.20 0.350.20 4.9 RUT3216 1206 3.200.15 1.600.15 0.550.10 0.450.20 0.400.20 9.5 RUT3225 1210 3.200.20 2.550.20 0.550.10 0.450.20 0.400.20 16 RUT5025 2010 5.000.20 2.500.20 0.550.10 0.600.20 0.600.20 26 RUT6432 2512 6.300.20 3.200.20 0.550.10 0.600.20 0.600.20 Jumper Low ohms (RUT Series) 4 digits indication Ultra Low ohms (RU Series) 100 I2 L <Top View> Type Marking The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. 41 Parts Numbering System *The part number system shall be in the following format RUT Code Designation 2012 Dimension & Size Code J Tolerance R100 Resistance Value CS Packaging Code RUT: Current Sensing Resistor Top Mounting (Face-up) 1005: 1.0x0.5() - 0402(inch) 1608: 1.6x0.8() - 0603(inch) 2012: 2.0x1.2() - 0805(inch) 3216: 3.2x1.6() - 1206(inch) 3225: 3.2x2.5() - 1210(inch) 5025: 5.0x2.5() - 2010(inch) 6432: 6.4x3.2() - 2512(inch) F: 1% G: 2% J: 5% 4-digit coding system CS: Tape & Reel 7" ES : Tape & Reel 10" AS: Tape & Reel 13" Percentage of the rated dissipation(%) R100 Precision - R means decimal point. - Other digits represent the significant value. - Example : R100 R100 = .100 = 0.100 =0.1 or 100 m 80 60 Operation area 40 20 -55 0 70 -30 0 30 60 155 90 120 Ultra Low Ohms (RUK Series) Ultra Low Ohms (RJ Series) R100 Arrays (CONVEX Type) 150 Arrays (CONCAVE Type) Ambient Temperature() Resistance Value Table Code Value () R100 0.1 R102 0.102 R105 0.105 R107 0.107 R110 0.11 R113 0.113 R115 0.115 R118 0.118 R120 0.12 R121 0.121 R124 0.124 R127 0.127 R130 0.13 R133 0.133 R137 0.137 R140 0.14 R143 0.143 R147 0.147 R150 0.15 Arrays (FLAT Type) Value Tol Value Tol Value Tol Value Tol Value Tol Tol (%) Code () (%) Code () (%) Code () (%) Code () (%) Code () (%) 1, 5 1 1 1 1, 5 1 1 1 1, 5 1 1 1 1, 5 1 1 1 1 1 1, 5 R154 R158 R160 R162 R165 R169 R174 R178 R180 R182 R187 R191 R196 R200 R205 R210 R215 R220 R221 0.154 0.158 0.16 0.162 0.165 0.169 0.174 0.178 0.180 0.182 0.187 0.191 0.196 0.200 0.205 0.21 0.215 0.22 0.221 1 1 1, 5 1 1 1 1 1 1, 5 1 1 1 1 1, 5 1 1 1 1, 5 1 R226 R232 R237 R240 R243 R249 R255 R261 R267 R270 R274 R280 R287 R294 R300 R301 R309 R316 R324 0.226 1 R330 0.33 1, 5 0.232 1 R332 0.332 1 0.237 1 R340 0.34 1 0.24 1, 5 R348 0.348 1 0.243 1 R357 0.357 1 0.249 1 R360 0.36 1, 5 0.255 1 R365 0.365 1 0.261 1 R374 0.374 1 0.267 1 R383 0.383 1 0.27 1, 5 R390 0.39 1, 5 0.274 1 R392 0.392 1 0.28 1 R402 0.402 1 0.287 1 R412 0.412 1 0.294 1 R422 0.422 1 0.3 1, 5 R430 0.43 1, 5 0.301 1 R432 0.432 1 0.309 1 R442 0.442 1 0.316 1 R453 0.453 1 0.324 1 R464 0.464 1 R470 R475 R487 R499 R510 R511 R523 R536 R549 R560 R562 R576 R590 R604 R619 R620 R634 R649 R665 0.47 0.475 0.487 0.499 0.51 0.511 0.523 0.536 0.549 0.56 0.562 0.576 0.59 0.604 0.619 0.62 0.634 0.649 0.665 1, 5 1 1 1 1, 5 1 1 1 1 1, 5 1 1 1 1 1 1, 5 1 1 1 R680 R681 R698 R715 R732 R750 R768 R787 R806 R820 R825 R845 R866 R887 R909 R910 R931 R953 R976 0.68 0.681 0.698 0.715 0.732 0.75 0.768 0.787 0.806 0.82 0.825 0.845 0.866 0.887 0.909 0.91 0.931 0.953 0.976 1, 5 1 1 1 1 1, 5 1 1 1 1, 5 1 1 1 1 1 1, 5 1 1 1 Anti-Sulfur Resistors Attenuator Characteristics Performance Packaging Standard Resistance Value 14 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 15 Ultra Low Ohms(RU Series) Feature Specification *Thick Film Type Ultra Low Ohm Resistor. *High Precision Reliability. *High Power with Low TCR. *100% Lead Free Products (PbO not used). *RoHS Compliant. Application *Current Sensing. *PCM of Battery Pack. *Power supplying part, DC power charger, adapter. *Mobile Phone, Mobile PC, Note PC, HDD, DSC, LCD. Structure and Dimensions <Top View> <Bottom View> R010 l1 W RU1005 1/8 (0.125) RU1608 1/4 (0.25) RU2012 1/3 (0.33) RU3216 1/2 (0.5) RU3225 2/3 (0.66) RU5025 3/4 (0.75) RU6432 1 (1) Rated Current (A) Resistance Range () 25m~100m T.C.R (ppm/) Rated Rated Working Ambient Temperature Temperature R47m:500 R47m:150 R25m:600 R33m:400 R33m:150 (P/R) Recommended Soldering Conditions 70 10m~100m -55~+155 Precision Jumper Power Derating Curve Low ohms (RUT Series) Type Inch L W H I1 I2 Average Weight RU1005 0402 1.000.05 0.500.05 0.350.05 0.250.15 0.250.15 0.6 RU1608 0603 1.600.10 0.800.10 0.450.10 0.300.20 RU2012 0805 2.000.15 1.250.15 0.550.10 0.400.20 RU3216 1206 3.200.15 1.600.15 0.600.10 0.450.20 RU3225 1210 3.200.20 2.550.20 0.550.10 0.450.20 2010 2512 5.000.20 6.300.20 2.500.20 3.200.20 0.600.10 0.600.10 0.800.20 1.000.20 R0.05:0.500.20 R0.05:0.350.20 R0.05:0.650.20 R0.05:0.400.20 R0.05:0.900.20 R0.05:0.600.20 R0.05:1.20.20 R0.05:0.750.20 R0.05:1.50.20 R0.05:0.900.20 R0.05:1.900.20 R0.05:1.100.25 2.2 4.7 9.4 Ultra Low ohms (RU Series) Marking Ultra Low Ohms (RUK Series) The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. 4-digit Coding System Ultra Low Ohms (RJ Series) - R means decimal point. - Other digits represent the significant value. - Example : R010 R010 = .010 = 0.010 = 0.01 or 10 m 100 Percentage of the rated dissipation(%) (UNIT: mm) 80 60 Arrays (CONVEX Type) Arrays (CONCAVE Type) Operation area Arrays (FLAT Type) 40 R010 20 9.5 0 -55 70 -30 27 General Structure General R25m:500 R33m:350 R33m:150 L I2 Operation Notes Example of land Pattern Design H RU6432 Power Rating (W) *Rated Current (A) = Rated Power(W) / Nominal Resistance Value() Please contact our sales representatives or product engineers for lower T.C.R or higher rated power products. <Side View> RU5025 Type 0 30 60 Anti-Sulfur Resistors 155 90 120 150 Attenuator Ambient Temperature() 42 Characteristics Performance Resistance Value Table Parts Numbering System Code *The part number system shall be in the following format RU Code Designation 2012 Dimension & Size Code F Tolerance R051 Resistance Value CS Packaging Code RU : Current sensing resistor 1005: 1.0x0.5() - 0402(inch) 1608: 1.6x0.8() - 0603(inch) 2012: 2.0x1.2() - 0805(inch) 3216: 3.2x1.6() - 1206(inch) 3225: 3.2x2.5() - 1210(inch) 5025: 5.0x2.5() - 2010(inch) 6432: 6.4x3.2() - 2512(inch) F: 1% G: 2% J: 5% 4-digit coding system CS: Tape & Reel 7" ES : Tape & Reel 10" AS: Tape & Reel 13" R010 R011 R012 R013 R015 R016 R018 Value () 0.01 0.011 0.012 0.013 0.015 0.016 0.018 (%) Tol Code 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 R020 R022 R024 R027 R030 R033 R036 Value () 0.02 0.022 0.024 0.027 0.03 0.033 0.036 (%) Tol Code 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 R039 R040 R043 R047 R050 R051 R056 Value () 0.039 0.04 0.043 0.047 0.05 0.051 0.056 (%) Tol Code 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 R062 R068 R075 R082 R091 R100 Value () 0.062 0.068 0.075 0.082 0.091 0.1 Tol (%) 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 Packaging Standard Resistance Value The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 16 17 Ultra Low Ohms(RUK Series) Feature Specification *Thick Film Type Ultra Low Ohm Resistor. *High Precision Reliability. *High Power with Very Low TCR. *100% Lead Free Products (PbO not used). *RoHS Compliant. *Current Sensing. *PCM of Battery Pack. *Power supplying part, DC power charger, adapter. *Mobile Phone, Mobile PC, Note PC, HDD, DSC, LCD. Structure and Dimensions <Top View> RUK2012 1/2 (0.5) 1/2 (0.50) RUK3216 1 (1.0) RUK3225 1 (1.0) RUK5025 1 (1.0) RUK6432 1 (1.0) RUK1608 Application Rated Current (A) Power Rating (W) Type Resistance Range () T.C.R (ppm/) Rated Ambient Temperature Rated Working Temperature Example of land Pattern Design (P/R) 100 10m~30m -55~+155 70 Recommended Soldering Conditions General Structure General Precision *Rated Current (A) = Rated Power(W) / Nominal Resistance Value() Please contact our sales representatives or product engineers for lower T.C.R or higher rated power products. <Bottom View> Operation Notes Jumper R010 Power Derating Curve W L <Side View> Marking The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. I1 4-digits coding system Type Inch L W H I1 I2 Average Weight 0.450.10 0.350.20 0.500.20 2.2 RUK1608 0603 1.600.10 0.800.10 RUK2012 0805 2.000.15 1.250.15 0.550.10 0.400.20 0.550.20 4.7 RUK3216 1206 3.200.15 1.600.15 0.65+0.10 0.450.20 0.900.20 9.4 RUK3225 1210 3.200.20 2.550.20 0.60+0.10 0.450.20 0.900.20 9.5 RUK5025 2010 5.000.20 2.500.20 0.65+0.10 0.800.20 1.100.20 27 RUK6432 2512 6.300.20 3.200.20 0.65+0.10 1.00.20 1.900.20 42 Parts Numbering System *The part number system shall be in the following format RUK Code Designation 1608 Dimension & Size Code F Tolerance R010 Resistance Value CS Packaging Code RUK : Current Sensing Resistor Low TCR 1608: 1.6x0.8() - 0603(inch) 2012: 2.0x1.2() - 0805(inch) 3216: 3.2x1.6() - 1206(inch) 3225: 3.2x2.5() - 1210(inch) 5025: 5.0x2.5() - 2010(inch) 6432: 6.4x3.2() - 2512(inch) F: 1% G: 2% J: 5% 4-digits coding system CS: Tape & Reel 7" ES : Tape & Reel 10" AS: Tape & Reel 13" Percentage of the rated dissipation(%) H (UNIT: mm) Ultra Low ohms (RU Series) - R means decimal point. - Other digits represent significant value. - Example : R010 R010 = .010 = 0.010 = 0.01 or 10 m 100 I2 Low ohms (RUT Series) 80 60 Ultra Low Ohms (RUK Series) Ultra Low Ohms (RJ Series) Operation area 40 Arrays (CONVEX Type) R010 Arrays (CONCAVE Type) 20 0 -55 70 -30 0 30 60 155 90 120 150 Arrays (FLAT Type) Ambient Temperature() Anti-Sulfur Resistors Resistance Value Table Code R010 R011 R012 R013 R015 R016 R018 Value () 0.01 0.011 0.012 0.013 0.015 0.016 0.018 (%) Tol Code 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 R020 R022 R024 R027 R030 R033 R036 Value () 0.02 0.022 0.024 0.027 0.03 0.033 0.036 (%) Tol Code 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 R039 R040 R043 R047 R050 R051 R056 Value () 0.039 0.04 0.043 0.047 0.05 0.051 0.056 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. (%) Tol Code 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 R060 R062 R068 R075 R082 R091 R100 Value () 0.06 0.062 0.068 0.075 0.082 0.091 0.1 Tol (%) 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 Attenuator Characteristics Performance Packaging Standard Resistance Value 18 19 Ultra Low Ohms(RJ Series) Feature Specification *Thick Film Wide Terminal Type. *High Precision Reliability. *High Power with Low TCR. *100% Lead Free Products (PbO not used). *RoHS Compliant. Power Rating (W) Type *Current Sensing. *PCM of Battery Pack. *DC Power Charger, Adapter. *Mobile Phone, Mobile PC, HDD, DSC, LCD. RJ1220(0508) 1 RJ1632(0612) 1 RJ2037(0815) 1 RJ3264(1225) 2 0.005~0.1 (5m~100m) P/R 100 70 -55~+155 <Bottom View> R010 General Structure Power Derating Curve <Side View> L H I1 Average Weight I2 1.600.10 0.450.15 0.250.15 0.300.15 2.3 0508 1.250.10 2.000.10 0.550.15 0.300.15 0.350.15 5 RJ1632 0612 1.600.15 3.200.15 0.55+0.15 0.350.20 0.400.20 10 RJ2037 0815 2.000.15 3.750.15 0.55+0.15 0.450.20 0.550.20 15 RJ3264 1225 3.200.20 6.400.20 0.55+0.15 0.600.20 0.600.20 40 0306 0.800.10 RJ1220 Percentage of the rated dissipation(%) W Low ohms (RUT Series) Ultra Low ohms (RU Series) - R means decimal point. - Other digits represent significant value. - Example : R010 R010 = .010 = 0.010 = 0.01 or 10 m 100 L Jumper 4-digits coding system H (UNIT: mm) Precision Marking The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. I2 W 80 60 Ultra Low Ohms (RUK Series) Ultra Low Ohms (RJ Series) Operation area 40 R010 Arrays (CONVEX Type) 20 0 70 -55 -30 0 30 60 Arrays (CONCAVE Type) 155 90 120 150 Ambient Temperature() Arrays (FLAT Type) Anti-Sulfur Resistors Resistance Value Table Parts Numbering System Code *The part number system shall be in the following format RUK Code Designation RJ : Thick Film Wide Terminal CSR Recommended Soldering Conditions I1 RJO816 Operation Notes Example of land Pattern Design *Rated Current (A) = Rated Power(W) / Nominal Resistance Value() Please contact our sales representatives or production engineer for lower T.C.R or higher rated power products. <Top View> Inch Rated Working Temperature General Structure and Dimensions Type Rated Ambient Temperature T.C.R (ppm/) 1/2 (0.5) RJ0618(0306) Application Resistance Range () Rated Current (A) 1608 Dimension & Size Code 0816 : 0.8x1.6() - 0306(inch) 1220 : 1.2x2.0() - 0508(inch) 1632 : 1.6x3.2() - 0612(inch) 2037 : 2.0x3.7() - 0815(inch) 3264 : 3.2x6.4() - 1225(inch) F Tolerance F: 1% G: 2% J: 5% R010 Resistance Value 4-digits coding system CS Packaging Code CS: Tape & Reel 7" ES : Tape & Reel 10" AS: Tape & Reel 13" R005 R006 R007 R008 R009 R010 R011 R012 Value () 0.005 0.006 0.007 0.008 0.009 0.01 0.011 0.012 (%) Tol Code 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 R013 R015 R016 R018 R020 R022 R024 R027 Value () 0.013 0.015 0.016 0.018 0.02 0.022 0.024 0.027 (%) Tol Code 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 R030 R033 R036 R039 R040 R043 R047 R050 Value () 0.03 0.033 0.036 0.039 0.04 0.043 0.047 0.05 (%) Tol Code 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 R051 R056 R062 R068 R075 R082 R091 R100 Value () 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 Tol (%) 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 1, 5 Attenuator Characteristics Performance Packaging Standard Resistance Value The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 20 21 Arrays(Convex Type) Feature Power Derating Curve *Reducing SMD surface area (40% reduced). *Reducing SMD costs (75% reduced). *Both flow and reflow soldering are applicable. The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. The product of lead-free terminal is RoHS compliant. PhO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exception. Percentage of the rated dissipation(%) 100 Application *For semiconductor devices. *For computers, digital circuits. Structure and Dimensions Operation area 20 A1 H A2 0 30 60 90 120 Ambient Temperature() Precision 150 Marking W H L Low ohms (RUT Series) *3 digits indication(E-24 series) - Left 2 digits represent significant figures. - Last 1 digit represents exponential number of 10. - Example: 103 Left 2 digits: 10 Last 1 digit: 3 103 = 10x10 3 =10000=10k p 155 Jumper 150 L General 70 -55 I2 I1 A1 General Structure 40 -30 I2 W Recommended Soldering Conditions 60 *4 Array I1 Example of land Pattern Design 80 0 *2 Array Operation Notes Ultra Low ohms (RU Series) 103 Ultra Low Ohms (RUK Series) p (UNIT: mm) Type L W H A1 A2 I1 I2 P Average Weight RP102P RP104P RP164P 1.000.10 2.000.10 3.200.10 1.000.10 1.000.10 1.600.10 0.350.10 0.350.10 0.500.10 0.330.10 0.300.15 0.400.15 0.400.15 0.600.15 0.200.10 0.150.10 0.300.15 0.250.10 0.250.15 0.300.15 0.650.10 0.500.15 0.800.15 1.1 2.2 8.9 *RP102P : No marking. Ultra Low Ohms (RJ Series) Land Pattern Arrays (CONVEX Type) P Arrays (CONCAVE Type) E Parts Numbering System : Land Pattern *The part number system shall be in the following format : Chip Resistor RP 10 4P J 100 Code Designation Dimension Resistors Tolerance Resistance Value CS Packaging Code RP: Convex type array 10 : 1005 16 : 1608 2P: 2 Pieces 4P: 4 Pieces J: 5% 3 digit coding system (IEC coding system) E-24 series CS : Tape Packaging 7" ES : Tape Packaging 10" AS : Tape Packaging 13" Specification Type 102P 104P 164P Power Rating (W) 1/16 *Rated voltage (V) = Working Overload Voltage Voltage (MAX) (MAX) 25(V) 25(V) 50(V) Arrays (FLAT Type) D 50(V) 50(V) 100(V) TCR (ppm/) Resistance Range () 1~9.9:300 10~1 :200 1~1M Rated Rated Working Ambient Temperature Temperature 70 Anti-Sulfur Resistors A B C Type A B C D E P1 10AT 0.4 0.4 0.25 0.5 0.5 0.65 102P 0.4 0.4 0.25 0.5 0.5 0.65 104P 164P 0.7 0.7 0.3 0.5 0.2 0.3 0.5 0.9 0.5 0.8 0.55 0.9 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. P2 0.5 0.8 Attenuator Characteristics Performance Packaging Standard Resistance Value -55~+155 Rated power(W)xNominal resistance value () Rated voltage should be lower than (MAX) working voltage. 22 23 Arrays(Concave Type) Feature Parts Numbering System *Strong Body. *Both flow and reflow soldering are applicable. *Concave Type Terminal. The product of lead-free terminal is RoHS compliant. PhO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exception. *The part number system shall be in the following format RN 10 4P J 100 Code Designation Dimension Resistors Tolerance Resistance Value RN : Concave Type Array RM : Inverted Type Array RK : Short Free & Inverted Type 10: 1005 2P: 2 Pieces 4P: 4 Pieces F: 1% J: 5% CS Packaging Code 3 digit coding system (IEC coding system) E-24 series CS : Tape Packaging 7" ES : Tape Packaging 10" AS : Tape Packaging 13" Application Specification Type Structure and Dimensions 102P 104P (1) Reverse Concave Type <Bottom View> <Side View> I1 Example of land Pattern Design Recommended Soldering Conditions *For semiconductor devices. *For computers, digital circuits. <Top View> Operation Notes General Structure Power Rating (W) Working Overload Voltage Voltage (MAX) (MAX) 25(V) 25(V) 1/16 *Rated voltage (V) = 50(V) 50(V) Rated Rated Working Ambient Temperature Temperature Resistance Range () TCR (ppm/) 1~9.9: 300 10~1M: 200 1~1M 70 -55~+155 Precision Rated power(W)xNominal resistance value () Rated voltage should be lower than (MAX) working voltage. I2 General Jumper W A2 A1 P (UNIT: mm) Type Inch L W H A1 A2 I1 I2 P Average Weight RN102P RN104P 0402x2R 0402X4R 1.000.10 2.000.10 1.000.10 1.000.10 0.350.10 0.400.10 0.300.10 0.300.10 0.300.10 0.150.10 0.150.10 0.250.15 0.250.15 0.500.10 0.500.10 1.2 2.8 Low ohms (RUT Series) The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. Ultra Low ohms (RU Series) (2) Inverted Concave Type <Top View> <Side View> I1 150 100 Ultra Low Ohms (RUK Series) 80 Ultra Low Ohms (RJ Series) Percentage of the rated dissipation(%) H L Power Derating Curve <Bottom View> I2 60 40 Arrays (CONVEX Type) 20 Arrays (CONCAVE Type) Operation area W -55 155 70 0 -30 A1 H L A2 0 30 P Arrays (FLAT Type) 60 90 120 150 Ambient Temperature() Anti-Sulfur Resistors (UNIT: mm) Type Inch L W H A1 A2 I1 I2 P Average Weight RM102P RM104P 0402x2R 0402X4R 1.000.10 2.000.10 1.000.10 1.000.10 0.350.10 0.400.10 0.300.10 0.300.10 0.300.10 0.150.10 0.150.10 0.250.15 0.250.15 0.500.10 0.500.10 1.2 2.8 Land Pattern P Attenuator E Characteristics Performance : Land Pattern (3) Short-free & Inverted Concave Type D <Top View> <Bottom View> <Side View> : Chip Resistor Packaging I2 150 B A W A1 H L A2 P (UNIT: mm) Type Inch L W H A1 A2 I1 I2 P Average Weight RK102P RK104P 0402x2R 0402X4R 1.000.10 2.000.10 1.000.10 1.000.10 0.350.10 0.400.10 0.300.10 0.300.10 0.300.10 - 0.250.15 0.250.15 0.500.10 0.500.10 1.2 2.8 Standard Resistance Value C Type A B C D E P 102P 0.3 0.3 0.2 0.5 0.4 0.5 104P 0.3 0.3 0.2 0.5 0.4 0.5 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 24 25 Arrays(Flat Type) Feature Parts Numbering System *Very Small Array. *Stable and Accurate Resistance. *Flat Type Terminal. The product of lead-free terminal is RoHS compliant. PhO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exception. *The part number system shall be in the following format RF 06 4P J 150 Code Designation Dimension Resistors Tolerance Resistance Value 06: 0603 2P: 2 Pieces 4P: 4 Pieces J: 5% 3 digit coding system (IEC coding system) E-24 series RF : Flat Type Array RM : Inverted Type Array CS Packaging Code CS : Tape Packaging 7" ES : Tape Packaging 10" AS : Tape Packaging 13" Application Specification Structure and Dimensions (1) Flat Type Array I2 General Structure Type Power Rating (W) 062P 064P 1/32 *Rated voltage (V) = Working Overload Voltage Voltage (MAX) (MAX) 12.5(V) TCR (ppm/) Resistance Range () 250 10~1M 25(V) Rated Rated Working Ambient Temperature Temperature 70 -55~+125 H A1 A2 D P P I2 I1 Power Derating Curve Low ohms (RUT Series) The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. Ultra Low ohms (RU Series) Ultra Low Ohms (RUK Series) 100 D A1 Percentage of the rated dissipation(%) H (UNIT: mm) Type RF062P RF064P Inch W L H A1 A2 0201x 2R 0.800.05 0.600.05 0.230.10 0.300.10 0201x4R 1.400.05 0.600.05 0.230.10 0.250.10 0.250.10 I1 D I2 P 0.100.10 0.200.10 0.500.05 0.100.10 0.200.10 0.350.05 Min 0.1 Min 0.1 Average Weight 0.3 0.5 80 Ultra Low Ohms (RJ Series) 60 Arrays (CONVEX Type) Operation area 40 Arrays (CONCAVE Type) 20 0 (2) Inverted Type Array 70 -55 -40 I1 0 40 125 Arrays (FLAT Type) 80 120 Ambient Temperature() I2 Anti-Sulfur Resistors Land Pattern W Precision Jumper W L General Rated power(W)xNominal resistance value () Rated voltage should be lower than (MAX) working voltage. W L Example of land Pattern Design Recommended Soldering Conditions *For semiconductor devices. *For computers, digital circuits. I1 Operation Notes Attenuator L H A1 A2 D A P : Land Pattern B P B : Chip Resistor I2 I1 A A A Packaging W C L H A1 D (UNIT: mm) Type Inch L W H Characteristics Performance A1 A2 RM062P 0201x2R 0.800.05 0.600.05 0.230.10 0.300.10 RM064P 0201x4R 1.400.05 0.600.05 0.230.10 0.300.10 0.300.10 D Min 0.1 Min 0.1 I1 I2 P 0.100.10 0.200.10 0.500.05 0.100.10 0.150.10 0.400.05 Average Weight 0.3 0.5 D C C TYPE (Inch) Dimension A 062P 064P D C B Reflow Soldering 2A + B C D 0.3 0.3 0.9 0.2 0.3 0.3 0.3 0.9 0.2 0.2 Standard Resistance Value The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 26 27 Anti-Sulfur Resistors Feature Specification *Stable in the Sulfur Atmosphere. *ASTM Satisfied. *Passed 720hrs with the dried Sulfur at 105. *High Precision Reliability. *RoHS Compliant. Power Rating (W) Type Application *Electronic Devices with long-term reliability. *Server System (Memory Module / HDD). *Network Equipment. *Automotive ECU parts. Structure and Dimensions RC 0603 1/20 RC 1005 1/16 RC 1608 RC 2012 1/10 RC 3216 1/4 RC 3225 1/3 RC 5025 2/3 RC 6432 1 Working Overload Voltage Voltage (MAX) (MAX) 1/8 1/32 064P 150 W 472 150 W W L L H L W H RCS0603 RCS1005 RCS1608 RCS2012 RCS3216 RCS3225 RCS5025 RCS6432 RPS102P RPS104P RPS164P RNS102P RNS104P RMS102P PMS104P RKS102P RKS104P RFS062P RFS064P RMS062P RMS064P 0201 0402 0603 0805 1206 1210 2010 2512 0402x2R 0402x4R 0603x4R 0402x2R 0402x4R 0402x2R 0402x4R 0402x2R 0402x4R 0201x2R 0201x4R 0201x2R 0201x4R 0.600.03 1.000.05 1.600.10 2.000.15 3.200.15 3.200.20 5.000.20 6.300.20 1.000.10 2.000.10 3.200.10 1.000.10 2.000.10 1.000.10 2.000.10 1.000.10 2.000.10 0.800.05 1.400.05 0.800.05 1.400.05 0.300.03 0.500.05 0.800.10 1.250.15 1.600.15 2.550.20 2.500.20 3.200.20 1.000.10 1.000.10 1.600.10 1.000.10 1.000.10 1.000.10 1.000.10 1.000.10 1.000.10 0.600.05 0.600.05 0.600.05 0.600.05 0.230.03 0.350.05 0.450.10 0.500.10 0.550.10 0.550.10 0.550.10 0.550.10 0.350.10 0.350.10 0.500.10 0.350.10 0.400.10 0.350.10 0.450.10 0.350.10 0.450.10 0.230.10 0.230.10 0.230.10 0.230.10 A1 0.330.10 0.400.15 0.600.15 0.300.10 0.300.10 0.300.10 0.300.10 0.300.10 0.300.10 0.200.10 0.200.10 0.200.10 0.200.10 I1 I2 0.300.15 0.400.15 0.300.10 0.300.10 0.300.10 0.200.10 0.200.10 0.100.05 0.200.10 0.300.20 0.400.20 0.450.20 0.450.20 0.600.20 0.600.20 0.200.10 0.150.10 0.300.15 0.150.10 0.150.10 0.150.10 0.150.10 0.100.10 0.100.10 0.100.10 0.100.10 0.150.05 0.250.10 0.350.10 0.350.20 0.400.20 0.400.20 0.600.20 0.600.20 0.250.10 0.250.10 0.300.15 0.250.15 0.250.15 0.250.15 0.250.15 0.250.15 0.250.15 0.200.10 0.200.10 0.200.10 0.200.10 P 0.650.10 0.500.15 0.800.15 0.500.10 0.500.10 0.500.10 0.500.10 0.500.10 0.500.05 0.400.05 0.500.05 0.400.05 Average Weight 0.15 0.6 2.1 4.9 9.5 16 26 41 1.1 2.2 8.9 1.2 2.8 1.2 2.8 1.2 2.8 0.3 0.5 0.3 0.5 *The part number system shall be in the following format RCS: Anti-sulfur General Type RPS: Anti-sulfur Convex Array RNS: Anti-sulfur Concave Array RMS: Anti-sulfur Inverted Array RKS: Anti-sulfur Short-Free Array 2012 Dimension & Size Code 0603: 0.6x0.3() - 0201(inch) 1005: 1.0x0.5() - 0402(inch) 1608: 1.6x0.8() - 0603(inch) 2012: 2.0x1.2() - 0805(inch) 3216: 3.2x1.6() - 1206(inch) 3225: 3.2x2.5() - 1210(inch) 5025: 5.0x2.5() - 2010(inch) 6432: 6.4x3.2() - 2512(inch) 062P: 0603x2R (0201x2R) 064P: 0603x4R (0201x4R) 102P: 0603x2R (0402x2R) 104P: 1005x4R (0402x4R) 164P: 1608x4R (0603x4R) 25(V) 25(V) 50(V) 25(V) 50(V) 50(V) 100(V) 70 -55~+155 J Tolerance F : 1% G : 2% J : 5% K : 10% 100 Resistance Value 3 or 4 digits coding system (IEC coding system) 3digits (E-24 series) 4digits (E-96 series) CS Packaging Code 10~1 250 70 -55~+125 Precision 1~9.9:300 10~1 :200 1~1 70 -55~+155 Jumper Power Derating Curve Ultra Low ohms (RU Series) The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. (The load current shall be derated according to derating curve in case of the `Jumper') Ultra Low Ohms (RUK Series) <0603, 0603 Array> 100 80 80 60 Operation area 40 20 0 -55 70 -40 0 Ultra Low Ohms (RJ Series) <1005~6432, 1005 Array, 1608 Array> 100 40 Arrays (CONCAVE Type) 60 Operation area 40 Arrays (FLAT Type) 20 125 80 120 Ambient Temperature() Arrays (CONVEX Type) 70 -55 155 0 -30 0 30 60 90 120 150 Ambient Temperature() Anti-Sulfur Resistors Attenuator Characteristics Performance Test name Adding Material Temperature Duration Time Decision Criteria ASTM B-809-5 Sulfur 50 g KON3 200 g DI water 200ml 50 1000hr R<1% Dry Sulfur Sulfur 50 g 105 720hr R<1% (IBM recommended) GS: Bulk Packaging CS: Tape Packaging 7" ES: Tape Packaging 10" AS: Tape Packaging 13" Recommended Soldering Conditions General Structure Sulfur Corrosion Test Parts Numbering System RCS Code Designation 12.5(V) 1~10 W L A1 400(V) 1~9.9:+300,-200 10~1 :100 (0603 : 250) 1.1 ~10 :300 Low ohms (RUT Series) Percentage of the rated dissipation(%) Inch 200(V) Example of land Pattern Design Rated power(W)xNominal resistance value (R) Rated voltage should not exceed the working voltage. (UNIT: mm) Type 300(V) 1/16 *Rated voltage (V) = I2 I1 150(V) 164P L L 100(V) 102P 104P L 50(V) -55~+125 Percentage of the rated dissipation(%) W 50(V) Operation Notes General 062P W 25(V) Rated Rated Working Ambient Temperature Temperature Resistance Range () TCR (ppm/) Packaging Desiccator (15 Liter) Hanger (PCB Holder) Sulfur Standard Resistance Value KNO3 [ Test Equipment ] 28 29 Attenuator Feature Specification *The RP10AT is small-size chip Attenuator, suitable for high density surface mounting. *Unbalanced type attenuator circuit in one chip(1.0 mm x 1.0 mm). *Mounting occupation area reduction : about 50 % reduction. *Mounting cost reduction : Mounting times 3 times 1 time. *Attenuation : 0 dB to 10 dB. Item Specifications Attenuation Value Attenuation Value Tolerance Characteristic Impendance Power Rating Frequency Range VSWR (Voltage Standing Wave Ratio) Number of terminals Category Temperature Range (Operating Temperature Range) Application *Attenuation / level control / impedance matching of high frequency signals of communication equipment; cellular phones(GSM, CDMA, etc.), PHS, PDA, for example. Operation Notes 0 dB~15dB 0 dB~5 dB : 0.3 dB 6 dB~15dB : 0.5 dB 50 0.04W / package DC to 3 GHz 1.3 max 4 terminals Example of land Pattern Design Recommended Soldering Conditions General Structure -55 to +125 General Structure and Dimensions * Structure Precision *Dimensions Coating A Power Derating Curve T Jumper The rated power is the maximum continuous loading power at 70 ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. Substrate W Resistor Rated load percent (%) 100 Percentage of the rated dissipation(%) Electrode C B P L (UNIT: mm) Type Power(W) L W RP10AT 0.04W / package 1.000.10 1.000.10 T A B 0.350.10 0.330.05 0.200.10 P Average Weight 0.650.10 1.1 C 0.250.10 Ultra Low ohms (RU Series) 80 Ultra Low Ohms (RUK Series) 60 40 Ultra Low Ohms (RJ Series) 20 Arrays (CONVEX Type) Operation area 0 70 -55 -40 Parts Numbering System 0 40 RP 10AT L Dimensions & Circuit Configuration Attenuation Value Tolerance RP:Convex type 10 :1.0x1.0(mm)-0404(inch) AT:Unbalanced -type Attenuator L : 0.3 dB H : 0.5 dB 125 80 120 Ambient Temperature() Arrays (CONCAVE Type) Arrays (FLAT Type) *The part number system shall be in the following format Code Designation Low ohms (RUT Series) A 03 Characteristic Impedance Attenuation Value A : 50 ohm 3 dB EX) 0 0dB CS Packing Type Equivalent Circuit Configuration CS :Tape Packaging 7" Anti-Sulfur Resistors Attenuator R2 Characteristics Performance R1 R3 Packaging Standard Resistance Value The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 30 31 Characteristics Performance Electrical Characteristic Requirements Specification Jumper Resistor Item Direct Current Resistance Temperature Characteristic Short-time Overload Intermittent Overload Environmental Characteristic Within the regulated resistance tolerance. 50mMax. J-Grade 1R 10:+300/-200ppm/ 10R1M:100ppm/(0603250ppm) 1MR10M:300ppm/ F-Grade 1R10M:100ppm/(0603250ppm) R Less than (1%+0.1) of the initial value. Insulation Resistance JIS C 5201-1 4.5 Voltage apply Within 5 sec. Test temp: 20, 65RH Test board: <FIG. 1> JIS C 5201-1 4.8 Test Temperature() 20 -55 / 20 125 T.C.R(ppm / )=(R-R20) / R20x1/(T-T20)x106 T=test Temperature, T20 =20 R=Resistance at T, R20 =Resistane at T20 Test board: <FIG. 1> JIS C 5201-1 4.13 Apply 2.5 times rated voltage for 5 sec. Wait 60 minutes at room temperature. Measure the resistance value. Test board: <FIG. 1> Max Surge Current 50mMax. JIS C 5201-1 4.13 2.5 times of rated voltage . 1 second ON, 25 second OFF. 10,000 cycles. Test board: <FIG. 1> Max Surge Current Visual No evidence of mechanical damage. Dielectric Withstanding Voltage Jumper 50mMax. Visual No evidence of mechanical damage. R Less than (3%+0.1) of the initial value. Test Methods Resistor JIS C 5201-1 4.7 Apply Voltage for 1 minute 0402.0603:50V 1005, 1608: 100V Other: 500V No evidence of mechanical damage. Over 1,000M Cu Cu Cu P2 P1 Substrate P1 V Item Requirements Specification Jumper Resistor Test Methods Resistor Jumper JIS C 5201-1 4.19 R Less than (1%+0.1) of the initial value. 50mMax. Perform 100 cycles as follows. Temperature Test Condition: -55/ 30min 125/ 30min Cycle sweep time: 5 min Visual No evidence of mechanical damage. Test board: <FIG. 1> JIS C 5201-1 4.25 R Less than (3%+0.1) of the initial value. 50mMax. Test Voltage: rated voltage Test temp.: 702 Load Life Time: 1,000+48 hours(90 min; ON, 30 min; OFF) Visual No evidence of mechanical damage. Test board: <FIG. 1> JIS C 5201-1 4.23 R Less than (3%+0.1) of the initial value. 50mMax. Dwell in -55 chamber without loading for 1,000+48 hours. Low Temp. Stabilize for 60 minutes at room temperature. Exposure Measure value. Visual No evidence of mechanical damage. Test board: <FIG. 1> JIS C 5201-1 4.23 or 1552chamber without High Temp. R Less than (3%+0.1) of the initial value. 50mMax. Dwell in 1252 loading for 1,000+48 hours. Stabilize for 60 minutes at room Exposure temperature. Visual No evidence of mechanical damage. Measure value. Test board: <FIG. 1> R Less than (3%+0.1) of the initial value. 50mMax. JIS C 5201-1 4.14 Test Voltage: rated voltage Test temp.: 402 Moisture Time: 1,000+48 hours(90 min; ON, 30 min; OFF) Resistance Visual No evidence of mechanical damage. Humidity: 90~95% RH Stabilize for 1 hrs & Measure. Test board: <FIG. 1> These characteristics apply to 1~10M. In case of other resistance range, please contact us. The next is specification in our company for flow soldering and test boards. Operation Notes Example of land Pattern Design Recommended Soldering Conditions General Structure General Precision Jumper Low ohms (RUT Series) Ultra Low ohms (RU Series) Ultra Low Ohms (RUK Series) Mechanical Characteristic Requirements Specification Jumper Resistor Item Solderability Bending Test R Coverage: 95% each termination. No crack of termination parts and ceramic exposure of surface by melting. Less than(1.0%+0.05)of the initialvalue. 50mMax. Visual No evidence of mechanical damage. Adhesive strength of termination Ultra Low Ohms (RJ Series) Flow soldering Conditions No mechanical damage or sign of disconnection Resistance R Less than(1%+0.05)of the initial value. to Soldering Visual No evidence of mechanical damage. Heat 50mMax. R Less than(1%+0.05)of the initial value. AntiVibration Test Visual No evidence of mechanical damage. 50mMax. Test Methods Resistor Jumper IEC60068-2-58 Rosin Flux: Rosin 25%, Methanol 75% Solder Temp.: 245+5/-0 Dipping time: 20.5 sec.(Both side dipping) JIS C 5201-1 4.33 After soldering resistor on the PCB, 3mm of bending shall be applied for 10 sec. Test board: <FIG. 2> Item Specification Dipping Arrays (CONVEX Type) Flux ROSIN 25%, IPA 75% Solder Sn-3.0Ag-0.5Cu Time: 5~10 sec. Time: 10 sec max. Temp.: 2605. Arrays (CONCAVE Type) Arrays (FLAT Type) 20 R230 Anti-Sulfur Resistors 3mm 90mm JIS C 5201-1(4.16) - Test strengh : 5N (500g . f), 0603 : 2N - Test time : Applying pressure for 10 seconds Attenuator 500 g.f Characteristics Performance JIS C 5201-1 4.18 - Flow soldering :2605,10 sec .max.(both side dipping) - Reflow soldering :2605, 10 sec. max. over 230, 30~40 sec. Packaging JIS C 5201-1 4.22 2 hours each in X, Y and Z axis(total 6 hours) 10 to 55Hz sweep in 1 minute at 1.5mm amplitude. Standard Resistance Value The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 32 33 Packaging Taping Type Packaging Table *Reel dimensions Symbol Tape Width 8mm 12mm 8mm 12mm 8mm 12mm 7" Reel 10" Reel E C 13" Reel C B D Symbol t A 10" Reel W B C O180+0/-3 O180+0/-3 O258+0/-3 O258+0/-3 O3302.0 O3302.0 O601.0 O601.0 O801.0 O801.0 O1001.0 O801.0 O130.3 O130.3 O130.3 O130.3 O130.3 O130.3 Tape Width 8mm 12mm 8mm 12mm 8mm 12mm 7" Reel 13" Reel Unit: mm D A E 40.2 40.2 40.2 40.2 40.2 40.2 W 2.00.5 2.00.5 2.00.5 2.00.5 2.00.5 2.00.5 90.5 130.5 90.5 130.5 90.5 130.5 (UNIT: mm) Pitch Width Code Reels Carrier Tape Quantity Weight(g) 0402 01005 CS 7" Pressed Paper CS DP AS FP CS DS ES AS CS ES AS CS ES AS CS ES AS CS ES AS CS CS AS CS CS 7" 7" 13" 13" 7" 7" 10" 13" 7" 10" 13" 7" 10" 13" 7" 10" 13" 7" 10" 13" 7" 7" 13" 7" Pressed Paper 20,000 15,000 143 126 154 573 474 92 152 331 539 125 324 561 149 360 658 157 382 695 183 463 674 202 267 1,041 126 126 CS AS CS AS CS AS CS AS 7" 13" 7" 13" 7" 13" 7" 13" 20,000 60,000 50,000 10,000 20,000 30,000 40,000 5,000 10,000 20,000 5,000 10,000 20,000 5,000 10,000 20,000 5,000 10,000 20,000 4,000 4,000 15,000 20,000 20,000 10,000 40,000 10,000 40,000 5,000 20,000 10,000 40,000 0603 0201 1005 1608 0402 0603 2012 0805 3216 1206 3225 1210 5025 2010 6432 2512 062P 064P 0201x2R 0201x4R 102P 0402x2R 104P 0402x4R Dimensions 4.00.1 Press Pocket or Punched Paper TYPE (inch) t 1.20.2 1.20.2 1.80.2 1.80.2 2.20.2 2.20.2 *Tape dimensions Type Taping Packaging TYPE (mm) 1.5 +- 0.1 0 1.750.1 1.0 2mm 3.50.05 8.00.1 B T RP10AT A 2.00.05 0402 0603 1005 RF062P RF064P RP102 A 0.240.03 0.380.05 0.700.10 0.700.10 0.700.10 1.170.10 1.200.10 1.200.10 1.200.10 1.200.10 RN102 RP104 RN104 -0603: Press pocket. 8mm 4.00.1 1.5 +- 0.1 0 1.750.1 1.0 Punched Paper 3.50.05 8.00.1 B T 2.00.05 4mm 4.00.1 A 1608 2012 3216 3225 RP164 A 1.100.20 1.650.20 2.000.20 2.900.20 2.000.20 B 0.450.03 0.680.05 1.200.10 0.900.10 1.600.10 1.170.10 1.200.10 1.200.10 2.200.10 2.200.10 T 0.5 Max 0.5 Max 0.6 Max 0.35 Max 0.35 Max 0.6 Max 0.6 Max 0.6 Max 0.6 Max 0.8 Max B T 1.900.20 0.8 Max 2.400.20 3.600.20 1.1 Max 3.600.20 3.600.20 164P 0603x4R 10AT (1010) 0404 Punched PE Pressed Paper Punched PE Punched paper Embossed PE 7" Punched paper Punched paper *General type, Precision, Low ohms, High ohms. *Packaging style can be modified when you want. 100 485 136 610 157 695 100 485 Operation Notes Example of land Pattern Design Recommended Soldering Conditions General Structure General Precision Jumper Low ohms (RUT Series) Ultra Low ohms (RU Series) Ultra Low Ohms (RUK Series) Ultra Low Ohms (RJ Series) Arrays (CONVEX Type) Arrays (CONCAVE Type) Arrays (FLAT Type) Anti-Sulfur Resistors 20.05 1.5 +0.1 - 0 B 120.2 12mm B Embossed Tape 4 1.75 5.50.05 Attenuator T 1.5 4 5025 6432 B T A 2.800.20 5.300.20 1.1 Max 3.500.20 6.750.20 Characteristics Performance Packaging A Standard Resistance Value The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 34 35 Standard Resistance Value Tolerance Code Table Tolerance Code D Digit Number IEC-Code System Specification F 4 digit E-192 0.5% E-96 1% G J K 3 digit M E-48 2% E-24 5% E-12 10% E-6 20% Operation Notes Example of land Pattern Design Recommended Soldering Conditions Significant Figure of Resistance Value E-192 E-96 E-48 E-24 E-192 E-96 E-48 100 101 102 104 105 106 107 109 110 111 113 114 115 117 118 120 121 123 124 126 127 129 130 132 133 135 137 138 140 142 143 145 147 149 150 152 154 156 158 160 162 164 165 167 169 172 174 176 100 100 10 178 180 182 184 187 189 191 193 196 198 200 203 205 208 210 213 215 218 221 223 226 229 232 234 237 240 243 246 249 252 255 258 261 264 267 271 274 277 280 284 287 291 294 298 301 305 309 312 178 178 102 105 105 107 110 110 11 113 115 115 118 12 121 121 124 127 127 130 133 13 133 137 140 140 143 147 147 150 154 15 154 158 16 162 162 165 169 169 174 E-24 18 182 187 187 191 196 196 200 205 20 205 210 215 215 221 226 22 226 232 237 237 24 243 249 249 255 261 261 267 27 274 274 280 287 287 294 301 309 301 30 E-192 E-96 E-48 316 320 324 328 332 336 340 344 348 352 357 361 365 370 374 379 383 388 392 397 402 407 412 417 422 427 432 437 442 448 453 459 464 470 475 481 487 493 499 505 511 517 523 530 536 542 549 556 316 316 E-24 324 332 332 33 340 348 348 357 36 365 365 374 383 383 392 402 39 402 412 422 422 432 442 43 442 453 464 464 47 475 487 487 499 511 511 51 523 536 536 549 E-192 E-96 E-48 E-24 562 569 576 583 590 597 604 612 619 626 634 642 649 657 665 673 681 690 698 706 715 723 732 741 750 759 768 777 787 796 806 816 825 835 845 856 866 876 887 898 909 920 931 942 953 965 976 988 562 562 56 576 590 General 590 Precision 604 619 619 62 634 649 649 681 Jumper Low ohms (RUT Series) 665 681 General Structure 68 Ultra Low ohms (RU Series) 698 715 Ultra Low Ohms (RUK Series) 715 732 750 750 75 768 787 Arrays (CONVEX Type) 787 Arrays (CONCAVE Type) 806 825 825 82 Arrays (FLAT Type) 845 866 866 Anti-Sulfur Resistors 887 909 909 91 931 953 Ultra Low Ohms (RJ Series) 953 976 Attenuator Characteristics Performance Packaging *Example Standard Resistance Value E-6 series 20% 80 E-12 series 10% E-24 series 5% E-96 series 1% 101 90 95 99 100 105 110 120 36 37 Attention ISO/TS 16949 ISO 14001 OHSAS 18001 QC080000 1. This catalogue is valid only to the products purchased either from us or through our official distributors. Operation Notes Example of land Pattern Design 2. Product specifications included in this catalogue are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding our product specifications, please contact our sales personnel or application engineers. Recommended Soldering Conditions General Structure General 3. We may modify or cease to produce the products listed in this catalogue without notice. Should you have any question, please contact our sales personnel or application engineers. 4. Without obtaining our permission, you should not be allowed to reproduce, copy, use or transfer any content or information contained this catalogue in any manner whatsoever for any purpose. 5. In no event, will we be responsible for any claim, dispute, damage or liability whatsoever arising from, relating to or in connection with your misuse of the products or/and information included in this catalogue. We will also not assume any responsibilities whatsoever for any claim, dispute, damage or liability with regards to the intellectual property rights or other related rights of ours or any third party associated with your use of our products and/or information contained in this catalogue. Weexpressly disclaim that no license is granted regarding the aforementioned rights. 6. Please note that the products in this catalogue are not designed or intended to use for the appolications set forth below. So, if you intend to use the products in this catalogue for the applications listed below,you should contact our sales personnel or application engineers before using. Please be aware that any misuse of the products deviating from product specifications or information provided in this catalogue may cause a serious property damage or a personal injury. Aerospace/Aviation equipment Transportation equipment (vehicles, trains, ships, etc) Medical equipment Military equipment Disaster prevention/crime prevention equipment Any other applications with the same as or similar complexity or reliability to the applications set forth above. Precision Quality System Certification List Jumper Table 1:Certification list of Samsung Factory Certification ISO / TS 16949 ISO 14001 OHSAS 18001 Section High Tech(China) Authority BSI Number TS 91430-008 Date 2011 - 11 - 29 Validity 2014 - 11 - 28 Authority BSI Number EMS 585307 Date 2012 - 04 - 17 Validity 2015 - 04 - 16 Authority BSI Number OHS 585308 Date 2012 - 04 - 17 Validity 2015 - 04 - 16 Authority UL Number PRC-HSPM-1766 Date 2010 - 07 - 27 Validity 2013 - 07 - 26 QC080000 Low ohms (RUT Series) Ultra Low ohms (RU Series) Ultra Low Ohms (RUK Series) Ultra Low Ohms (RJ Series) Arrays (CONVEX Type) Arrays (CONCAVE Type) Arrays (FLAT Type) Anti-Sulfur Resistors Attenuator Characteristics Performance Packaging Standard Resistance Value 38 39