P6SMBJ15A - MULTICOMP - Datasheet.Support

SMBJ / SMCJ Series

Surface Mount Voltage Suppressors

Page 1 05/10/05 V1.1

TRANSIENT VOLTAGE SUPPRESSOR

Features:

•For surface mounted applications in order to optimise board space.

•Low profile package.

•Built-in strain relief.

•Glass passivated junction.

•Excellent clamping capability.

•Low inductance.

•Repetition Rate (duty cycle) : 0.05% (SMCJ).

: 0.01% (SMBJ).

•Fast response time : typically less than 1.0ps from 0 volts to BV minimum.

•Typical IDless than 1µA above 10V.

•High temperature soldering : 250°C/10 seconds (SMCJ).

: 260°C/10 seconds (SMBJ).

Rating

(W) Type

Dimensions

A B C

600 SMBJ 2.11 4.57 3.94

1500 SMCJ 3.15 7.11 6.22

Dimensions : Millimetres

Dimensional Table

SMBJ / SMCJ Series

Surface Mount Voltage Suppressors

Page 2 05/10/05 V1.1

Mechanical Data

Case : JEDEC DO-214AA moulded plastic

over passivated junction (SMCJ).

: JEDEC DO-214AB moulded plastic

over passivated junction (SMBJ).

Terminals : Solder plated, solderable per

MIL-STD-750, Method 2026.

Polarity : Indicated by cathode band.

Standard packaging : 16mm tape per (EIA 481) (SMCJ).

12mm tape per (EIA 481) (SMBJ).

Weight: 0.007 ounce, 0.21 gram (SMCJ).

0.003 ounce, 0.093 gram (SMBJ).

SMC/DO-214AB

SMB/DO-214AA

Dimensions in inches and (millimetres)

SMBJ / SMCJ Series

Surface Mount Voltage Suppressors

Page 3 05/10/05 V1.1

Notes:

1. Non-repetitive current pulse, per Fig. 3 and derated above TA= 25°C per Fig. 2.

2. Mounted on 8.0mm2 copper pads to each terminal (SMCJ).

Mounted on 5.0mm2 (.013mm thick) land areas (SMBJ).

3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.

Maximum Ratings and Electrical Characteristics

Ratings at 25°C ambient temperature unless otherwise specified.

Rating Symbol Value Units

Peak Pulse Power Dissipation on 10/1000µs waveform

(Note 1 & 2 - Fig 1) PPPM Minimum 600 Watts

Peak Pulse Current on 10/1000µs waveform

(Note 1 - Fig 3) IPPM - Amps

Peak forward Surge Current 8.3ms single half sine-wave

superimposed on rated load (JEDEC Method - Note 2 & 3) IFSM 100.0 Amps

Operating Junction and Storage Temperature Range TJ, TSTG -55 to +150 °C

MAXIMUM RATINGS AND CHARACTERISTIC CURVES

100

1.0

0.1

s 1.0

s 10

s 100

s 1.0ms 10ms

td, PULSE WIDTH, SEC

PPM

, PEAK PULSE POWER, KW

100

0 25 50 75

100 125 150 175 200

, AMBIENT TEMPERATURE, °C

PEAK PULSE POWER(pppm) OR CURRENT

(Ipp)DERATING IN PERCENTAGE %

Fig. 1-PEAK PULSE POWER RATING CURVE Fig. 2-PULSE DERATING CURVE

MOUNTED ON 5.0mm2

COPPER LAND AREAS

NON-REPETITIVE

PULSE WAVEFORM

SHOWN IN FIGURE 3

TA = 25°C

SMBJ / SMCJ Series

Surface Mount Voltage Suppressors

Page 4 05/10/05 V1.1

Fig. 4-TYPICAL JUNCTION CAPACITANCEFig. 3-PULSE WAVEFORM

20,000

10,000

1,000

100

1.0

2.0 10 20

200 400

MEASURED AT

STAND-OFF

VOLTAGE(VMW)

TJ = 25°C

f = 1.0MHz

Vsig = 50mVp-p

MEASURED AT

ZERO BIAS

V(WM), REVERSE STAND-OFF VOLTAGE, VOLTS

CJ, CAPACITANCE, pF

150

100

1.0 2.0

3.0

TA = 25°C

Pulse W idth(td) is Defined as the

Point W here the Peak Current

Decays to 50% of l

Peak Value Ippm

Half Value-I

10/ Waveform

as Defined by R.E.A.

e-kt

tf = 10µsec

t, TIME , ms

Ippm, PEAK PULSE CURRENT, %

Fig. 5-MAXIMUM NON-REPETITIVE PEAK

FORWARD SURGE CURRENT

200

100

4 6 8 10 20

60 80 100

TJ = TJ max

8.3ms SINGLE HALF

SINCE-WAV E JEDEC

METHOD

NUMBER OF CYCLES AT 60Hz

IFSM, PEAK FORWARD SURGE

CURRENT, AMPERES

MAXIMUM RATINGS AND CHARACTERISTIC CURVES

SMBJ / SMCJ Series

Surface Mount Voltage Suppressors

Page 5 05/10/05 V1.1

Uni-Directional 600 Watt Surface Mount TVS

Device

Marking

Code

Stand-Off

Voltage

Vrm (V)

Breakdown

Voltage

Vbr (V)

Minimum at IT

Breakdown

Voltage

Vbr (V)

Maximum at IT

Test

Current

Itest (mA)

Maximum

Clamping

Voltage

Vclamp (V)

Peak

Pulse

Current

IPP (A)

Part Number

KE 5.0 6.4 7.25 10 9.2 65.2 SMBJ5.0A

KP 7.5 8.33 9.58

12.9 46.5 SMBJ7.5A

LE 12.0 13.3 15.3 19.9 30.2 SMBJ12A

LM 15.0 16.7 19.2 24.4 24.0 SMBJ15A

LZ 24.0 26.7 30.7 38.9 15.4 SMBJ24A

MK 30.0 33.3 38.3 48.4 12.4 SMBJ30A

Uni-Directional 1500 Watt Surface Mount TVS

Device

Marking

Code

Stand-Off

Voltage

Vrm (V)

Breakdown

Voltage

Vbr (V)

Minimum at IT

Breakdown

Voltage

Vbr (V)

Maximum at IT

Test

Current

Itest (mA)

Maximum

Clamping

Voltage

Vclamp (V)

Peak

Pulse

Current

IPP (A)

Part Number

GDE 5 6.4 7.25

9.2 163.0 SMCJ5.0A

GDG 6 6.67 7.67 10.3 145.6 SMCJ6.0A

GDV 9 10.0 11.5

15.4 97.4 SMCJ9.0A

GEE 12 13.3 15.3 19.9 75.3 SMCJ12A

GEM 15 16.7 19.2 24.4 61.5 SMCJ15A

GEX 22 24.4 28.0 35.5 42.2 SMCJ22A

GFM 33 36.7 42.2 53.3 28.1 SMCJ33A

GFX 48 53.3 61.3 77.4 19.4 SMCJ48A

SM 5.0 A

SMBJ / SMCJ Series

Surface Mount Voltage Suppressors

Page 6 05/10/05 V1.1

Bi-Directional 1500 Watt Surface Mount TVS

Device

Marking

Code

Stand-Off

Voltage

Vrm (V)

Breakdown

Voltage

Vbr (V)

Minimum at IT

Breakdown

Voltage

Vbr (V)

Maximum at IT

Test

Current

Itest (mA)

Maximum

Clamping

Voltage

Vclamp (V)

Peak

Pulse

Current

IPP (A)

Part Number

BDE 5 6.4 7.25

9.2 163.0 SMCJ5.0CA

BDG 6 6.67 7.67 10.3 145.6 SMCJ6.0CA

BDV 9 10.0 11.5

15.4 97.4 SMCJ9.0CA

BEE 12 13.3 15.3 19.9 75.3 SMCJ12CA

BEM 15 16.7 19.2 24.4 61.5 SMCJ15CA

BEX 22 24.4 28.0 35.5 42.2 SMCJ22CA

BFM 33 36.7 42.2 53.3 28.1 SMCJ33CA

BFX 48 53.3 61.3 77.4 19.4 SMCJ48CA

Part Number Explanation:

Type Suffix TypeVoltage

Wattage Rating : BJ = 600W and CJ = 1500W.

Voltage : 5.0, 6.0, 7.5, 9.0, 12, 15, 22, 24, 30, 33 and 48V.

Suffix Type : A = Uni-directional and CA = Bi-directional.

Wattage Rating

Device

Marking

Code

Stand-Off

Voltage

Vrm (V)

Breakdown

Voltage

Vbr (V)

Minimum at IT

Breakdown

Voltage

Vbr (V)

Maximum at IT

Test

Current

Itest (mA)

Maximum

Clamping

Voltage

Vclamp (V)

Peak

Pulse

Current

IPP (A)

Part Number

AE 5.0 6.4 7.25 10 9.2 65.2 SMBJ5.0CA

AP 7.5 8.33 9.58

12.9 46.5 SMBJ7.5CA

BE 12.0 13.3 15.3 19.9 30.2 SMBJ12CA

BM 15.0 16.7 19.2 24.4 24.0 SMBJ15CA

BZ 24.0 26.7 30.7 38.9 15.4 SMBJ24CA

CK 30.0 33.3 38.3 48.4 12.4 SMBJ30CA

Bi-Directional 600 Watt Surface Mount TVS

For enquiries from all other markets

SMBJ / SMCJ Series

Surface Mount Voltage Suppressors

Page 7 05/10/05 V1.1

Notes:

International Sales Offices:

AUSTRALIA – Farnell InOne

Tel No: ++ 61 2 9645 8888

Fax No: ++ 61 2 9644 7898

FRANCE – Farnell InOne

Tel No: ++ 33 474 68 99 99

Fax No: ++ 33 474 68 99 90

NORWAY – Farnell InOne

Tel No: ++ 45 44 53 66 66

Fax No: ++ 45 44 53 66 02

AUSTRIA – Farnell InOne

Tel No: ++ 43 662 2180 680

Fax No: ++ 43 662 2180 670

GERMANY – Farnell InOne

Tel No: ++ 49 89 61 39 39 39

Fax No: ++ 49 89 613 59 01

PORTUGAL – Farnell InOne

Tel No: ++ 34 93 475 8804

Fax No: ++ 34 93 474 5288

ESTONIA – Farnell InOne

Tel No: ++ 358 9 560 7780

Fax No: ++ 358 9 345 5411

NETHERLANDS

– Farnell InOne

Tel No: ++ 31 30 241 7373

Fax No: ++ 31 30 241 7333

UK – Farnell InOne

Tel No: ++ 44 8701 200 200

Fax No: ++ 44 8701 200 201

SINGAPORE

–

Farnell-Newark InOne

Tel No: ++ 65 6788 0200

Fax No: ++ 65 6788 0300

HONG KONG

–

Farnell-Newark InOne

Tel No: ++ 852 2268 9888

Fax No: ++ 852 2268 9899

BELGIUM – Farnell InOne

Tel No: ++ 32 3 475 2810

Fax No: ++ 32 3 227 3648

BRAZIL – Farnell-Newark InOne

Tel No: ++ 55 11 4066 9400

Fax No: ++ 55 11 4066 9410

IRELAND – Farnell InOne

Tel No: ++ 353 1 830 9277

Fax No: ++ 353 1 830 9016

SPAIN – Farnell InOne

Tel No: ++ 34 93 475 8805

Fax No: ++ 34 93 474 5107

CHINA – Farnell-Newark InOne

Tel No: ++86 10 6238 5152

Fax No: ++86 10 6238 5022

ITALY – Farnell InOne

Tel No: ++ 39 02 93 995 200

Fax No: ++ 39 02 93 995 300

SWEDEN – Farnell InOne

Tel No: ++ 46 8 730 50 00

Fax No: ++ 46 8 83 52 62

MALAYSIA –

Farnell-Newark InOne

Tel No: ++ 60 3 7873 8000

Fax No: ++ 60 3 7873 7000

SWITZERLAND

– Farnell InOne

Tel No: ++ 41 1 204 64 64

Fax No: ++ 41 1 204 64 54

DENMARK – Farnell InOne

Tel No: ++ 45 44 53 66 44

Fax No: ++ 45 44 53 66 06

UK –CPC

++ 44 8701 202 530

++ 44 8701 202 531

UK –BuckHickman InOne

++ 44 8450 510 150

++ 44 8450 510 130

NEW ZEALAND

– Farnell InOne

Tel No: ++ 64 9 357 0646

Fax No: ++ 64 9 357 0656

EXPORT – Farnell InOne

Tel No: ++ 44 8701 200 208

Fax No: ++ 44 8701 200 209

export

FINLAND – Farnell InOne

Tel No: ++ 358 9 560 7780

Fax No: ++ 358 9 345 5411

Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes

in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.

The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data

sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage

resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.

This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2004.

http://www.farnellinone.com

http://www.buckhickmaninone.com

http://www.cpc.co.uk