Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EE107 –
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
L±2.0
Pressure relief +
–
Radial Lead Type
Series: EE Type: A
■Di men sions in mm (not to scale)
■Frequency correction factor for ripple current
Body Dia. φD10 12.5 16 18
Lead Dia. φd0.6 0.6 0.8 0.8
Lead space F 5.0 5.0 7.5 7.5
[mm]
■Features
● High ripple current (at high frequency):
40 % higher than ED Series
● Endurance: 105 °C 8000 h to 10000 h
● RoHS directive compliant
■Specifi cations
Category Temp. Range –25 °C to + 105 °C
Rated W.V. Range 160 V .DC to 450 V .DC
Nominal Cap. Range10 µF to 330 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.06 CV +10 (µA) After 2 minutes
tan δW.V. 160 200 250350400450 (120 Hz/+20 °C)
tan δ0.15 0.15 0.15 0.20 0.24 0.24
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage),
when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
φ
10 : 8000 hours
φ
12.5 to φ
18 : 10000 hours
Capacitance change ±20 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W. V.
(V. DC)
Cap.
(µF)
Frequency (Hz)
60 <120 <300 <1 k <10 k <100 k <
160 to 450 10 to 82 0.25 0.35 0.50 0.65 0.90 1.00
100 to 330 0.30 0.400.550.700.901.00
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EE108 –
■Case size/Impedance/Ripple current
Cap.
(µF)
160 V 200 V
Case size
(φD
L)
Ripple current
(mA r.m.s.) 105 °C
Case size
(φD
L)
Ripple current
(mA r.m.s.) 105 °C
120 Hz 100 kHz 120 Hz 100 kHz
22 10
20 245 700 10
20 300 850
33 10
20 280 810 10
20 320 920
47 10
20 370 1065 12.5
20 385 1100
68 12.5
20 470 1350 12.5
25
16
20S
465
465
1330
1330
82 12.5
25 520 1480 16
20S 510 1460
100 12.5
25
16
20S
660
680
1660
1700
16
25
18
20S
690
670
1730
1665
150 16
25
18
20S
755
730
1890
1820 16
25 740 1860
220 16
31.5
18
25S
910
780
2280
1950 18
31.5 1175 2600
330 18
31.5 1040 2600 18
40 1250 3120
Cap.
(µF)
250 V 350 V
Case size
(φD
L)
Ripple current
(mA r.m.s.) 105 °C
Case size
(φD
L)
Ripple current
(mA r.m.s.) 105 °C
120 Hz 100 kHz 120 Hz 100 kHz
15 10
20 170 480
22 10
20 275 785 12.5
20 230 660
33 12.5
20 350 995 12.5
25
16
20S
275
315
790
900
47 12.5
25
16
20S
450
490
1290
1400
16
25
18
20S
375
375
1070
1070
68 16
20S 490 1400 16
31.5
18
25S
535
465
1530
1330
82 16
25
18
20S
590
590
1680
1680 18
25S 535 1530
100 16
31.5
18
25S
840
840
2100
2100 18
31.5 640 1600
150 18
31.5 1010 2520
220 18
40 1175 2940
Cap.
(µF)
400 V 450 V
Case size
(φD
L)
Ripple current
(mA r.m.s.) 105 °C
Case size
(φD
L)
Ripple current
(mA r.m.s.) 105 °C
120 Hz 100 kHz 120 Hz 100 kHz
10 10
20 150 430 10
20U
12.5
20
115
170
330
490
15 12.5
20 205 590 12.5
25 270 780
22 12.5
25
16
20S
265
300
760
860 16
20S 330 945
33 16
20S 355 1020 16
25
18
20S
350
350
1000
1000
47 16
25
18
20S
410
410
118 0
118 0
16
31.5
18
25S
420
420
1200
1200
56 18
31.5 480 1380
68 18
25 515 1470 18
40 630 1800
82 18
31.5 575 1645
100 18
40 825 2060
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EE109 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C
)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm)(mm)(mm) (pcs)(pcs)
160
22 10 20 700 0.15 8000 0.6 5.0 5.0 EEUEE2C220( ) 200 500
33 10 20 810 0.15 8000 0.6 5.0 5.0 EEUEE2C330( ) 200 500
47 10 20 1065 0.15 8000 0.6 5.0 5.0 EEUEE2C470( ) 200 500
68 12.5 20 1350 0.15 10000 0.6 5.0 5.0 EEUEE2C680( ) 200 500
82 12.5 25 1480 0.15 10000 0.6 5.0 5.0 EEUEE2C820( ) 200 500
100 12.5 25 1660 0.15 10000 0.6 5.0 5.0 EEUEE2C101( ) 200 500
16 20 1700 0.15 10000 0.8 7.5 7.5 EEUEE2C101S( ) 100 250
150 16 25 1890 0.15 10000 0.8 7.5 7.5 EEUEE2C151( ) 100 250
18 20 1820 0.15 10000 0.8 7.5 7.5 EEUEE2C151S( ) 100 250
220 16 31.5 2280 0.15 10000 0.8 7.5 EEUEE2C221 100
18 25 1950 0.15 10000 0.8 7.5 7.5 EEUEE2C221S( ) 100 250
3301831.526000.1510000 0.8 7.5 EEUEE2C331 50
200
22 10 20 850 0.15 8000 0.6 5.0 5.0 EEUEE2D220( ) 200 500
33 10 20 920 0.15 8000 0.6 5.0 5.0 EEUEE2D330( ) 200 500
47 12.5 20 1100 0.15 10000 0.6 5.0 5.0 EEUEE2D470( ) 200 500
68 12.5 25 1330 0.15 10000 0.6 5.0 5.0 EEUEE2D680( ) 200 500
16 20 1330 0.15 10000 0.8 7.5 7.5 EEUEE2D680S( ) 100 250
82 16 20 1460 0.15 10000 0.8 7.5 7.5 EEUEE2D820S( ) 100 250
100 16 25 1730 0.15 10000 0.8 7.5 7.5 EEUEE2D101( ) 100 250
18 20 1665 0.15 10000 0.8 7.5 7.5 EEUEE2D101S( ) 100 250
150162518600.1510000 0.8 7.5 7.5 EEUEE2D151( ) 100 250
2201831.526000.1510000 0.8 7.5 EEUEE2D221 100
330184031200.1510000 0.8 7.5 EEUEE2D331 50
250
22 10 20 785 0.15 8000 0.6 5.0 5.0 EEUEE2E220( ) 200 500
33 12.5 20 9950.1510000 0.6 5.0 5.0 EEUEE2E330( ) 200 500
47 12.5 25 1290 0.15 10000 0.6 5.0 5.0 EEUEE2E470( ) 200 500
16 20 1400 0.15 10000 0.8 7.5 7.5 EEUEE2E470S( ) 100 250
68 16 20 1400 0.15 10000 0.8 7.5 7.5 EEUEE2E680S( ) 100 250
82 16 25 1680 0.15 10000 0.8 7.5 7.5 EEUEE2E820( ) 100 250
18 20 1680 0.15 10000 0.8 7.5 7.5 EEUEE2E820S( ) 100 250
100 16 31.5 2100 0.15 10000 0.8 7.5 EEUEE2E101 100
18 25 2100 0.15 10000 0.8 7.5 7.5 EEUEE2E101S( ) 100 250
1501831.525200.1510000 0.8 7.5 EEUEE2E151 50
220184029400.1510000 0.8 7.5 EEUEE2E221 50
350
15 10 20 480 0.20 8000 0.6 5.0 5.0 EEUEE2V150( ) 200 500
22 12.5 20 6600.2010000 0.6 5.0 5.0 EEUEE2V220( ) 200 500
33 12.5 25 7900.2010000 0.6 5.0 5.0 EEUEE2V330( ) 200 500
16 20 900 0.20 10000 0.8 7.5 7.5 EEUEE2V330S( ) 100 250
47 16 25 1070 0.20 10000 0.8 7.5 7.5 EEUEE2V470( ) 100 250
18 20 1070 0.20 10000 0.8 7.5 7.5 EEUEE2V470S( ) 100 250
68 16 31.5 1530 0.20 10000 0.8 7.5 EEUEE2V680 100
18 25 1330 0.20 10000 0.8 7.5 7.5 EEUEE2V680S( ) 100 250
82 18 25 1530 0.20 10000 0.8 7.5 7.5 EEUEE2V820S( ) 100 250
1001831.516000.2010000 0.8 7.5 EEUEE2V101 50
Endurance : 105 °C φ10=8000 h, φ12.5 to φ18=10000 h
When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EE110 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C
)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm)(mm)(mm) (pcs)(pcs)
400
10 10 20 430 0.24 8000 0.6 5.0 5.0 EEUEE2G100( ) 200 500
15 12.5 20 5900.2410000 0.6 5.0 5.0 EEUEE2G150( ) 200 500
22 12.5 25 7600.2410000 0.6 5.0 5.0 EEUEE2G220( ) 200 500
16 20 8600.2410000 0.8 7.5 7.5 EEUEE2G220S( ) 100 250
33 16 20 1020 0.24 10000 0.8 7.5 7.5 EEUEE2G330S( ) 100 250
47 16 25 1180 0.24 10000 0.8 7.5 7.5 EEUEE2G470( ) 100 250
18 20 1180 0.24 10000 0.8 7.5 7.5 EEUEE2G470S( ) 100 250
68 18 25 1470 0.24 10000 0.8 7.5 7.5 EEUEE2G680( ) 100 250
82 18 31.5 1645 0.24 10000 0.8 7.5 EEUEE2G820 50
10018402060 0.24 10000 0.8 7.5 EEUEE2G101 50
450
10 10 20 330 0.24 8000 0.6 5.0 5.0 EEUEE2W100U( ) 200 500
12.5 20 4900.2410000 0.6 5.0 5.0 EEUEE2W100( ) 200 500
15 12.5 25 7800.2410000 0.6 5.0 5.0 EEUEE2W150( ) 200 500
22 16 20 9450.2410000 0.8 7.5 7.5 EEUEE2W220S( ) 100 250
33 16 25 1000 0.24 10000 0.8 7.5 7.5 EEUEE2W330( ) 100 250
18 20 1000 0.24 10000 0.8 7.5 7.5 EEUEE2W330S( ) 100 250
47 16 31.5 1200 0.24 10000 0.8 7.5 EEUEE2W470 100
18 25 1200 0.24 10000 0.8 7.5 7.5 EEUEE2W470S( ) 100 250
56 18 31.5 1380 0.24 10000 0.8 7.5 EEUEE2W560 50
68 18 40 1800 0.24 10000 0.8 7.5 EEUEE2W680 50
Endurance : 105 °C φ10=8000 h, φ12.5 to φ18=10000 h
When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Sep. 201000
