TCXOs
IQD Frequency Products Ltd, Station Road, Crewkerne, Somerset TA18 8AR, United Kingdom
Tel: +44 (1460) 270200; Fax: +44 (1460) 72578;
Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com
CFPT-9050 SMD TCVCXO
ISSUE 8; 1 NOVEMBER 2008 - RoHS 2002/95/EC
Description
0.3ppm TCXO manufactured for us by Rakon utilising their
▪Pluto™ ASIC technology. Its wide frequency range, operating
temperature range and drive capability coupled with high
stability and linear frequency pulling make it the ideal
reference oscillator. Its ability to function down to a supply
voltage of 2.4V and low power consumption makes it suitable
for mobile applications
Package Outline
14.7 x 9.2mm
▪
Standard Frequencies
9.6, 10, 12.8, 19.44, 20, 38.88, 49.152, 51.84MHz
▪
Output Compatibility & Load
HCMOS 15pF max
▪
ACMOS 50pF max
▪
Sinewave 10k
▪W // 10pF, AC-coupled
Clipped sinewave 10k
▪W // 10pF, AC-coupled
Frequency Stability
Temperature: see table
▪
Typical Supply Voltage Variation ± 10% < ± 0.2 ppm*
▪
Typical Load Coefcient 15pF ± 5pF < ± 0.2 ppm*
▪*Depending on frequency and output type
Frequency Adjustment
Three options with external Voltage Control applied to Pad 1:
A - Ageing adjustment: > ± 5ppm (Standard Option)
▪
B - No frequency adjustment. Initial calibration @ 25°C
▪< ± 0.5 ppm
C - High Pulling ±10ppm to ±50ppm may be available
▪depending on specication options. Contact our sales ofce
Linearity <1% (positive slope)
▪
Input resistance >100k
▪W
Modulation bandwidth >2kHz
▪
Standard control voltage ranges:
▪Without reference voltage - Vs = 5.0V 2.5V ± 2V
Without reference voltage - Vs = 3.3V 1.65V ± 1V
With reference voltage - Vc = 0V to Vref
Storage Temperature Range
–55 to 125°C
▪
Tri-State Operation
Logic ‘1’ (>60%Vs) to Pad 2 enables output
▪
Logic ‘0’ (<20%Vs) to Pad 2 disables output
▪
When at logic ‘0’ the output stage is disabled for all output
▪options, but the oscillator and compensation circuit are still
active (Current consumption < 1mA)
Supply Voltage
Standard 3.3V, 5.0V (see table)
▪
Supply voltages in the range 2.4 to 6.0V available to order,
▪please contact our sales ofce
Supply Current
HCMOS Typically:
▪1+ Frequency(MHz)*Supply(V)*{Load(pF)+ 15}*10–3 mA
eg. 20MHz, 5V, 15pF ≈ 4mA
ACMOS Typically:
▪1+ Frequency(MHz)*Supply(V)*{Load(pF)+ 23}*10–3 mA
Sinewave, 6 to 12 mA depending on frequency
▪
Clipped Sinewave, Typically:
▪1+ Frequency(MHz)*1.2*{Load(pF)+ 30}*10–3 mA
Ageing
± 1ppm maximum in rst year
▪
± 3ppm maximum for 10 years
▪
± 1ppm maximum after reow
▪
Reference Voltage, Vref (HCMOS/ACMOS only)
Optional reference voltage output on Pad 5, suitable for
▪potentiometer supply or DAC reference.
1. No output (Standard option)
2. 2.2V, for Min. Vs > 2.4V
3. 2.7V, for Min. Vs > 3.0V
4. 4.2V, for Min. Vs > 4.5V
Maximum load current (mA) = Vref/10
For manual frequency adjustment (HCMOS/ACMOS output
only) connect an external 50kW potentiometer between Pad 5
(Reference Voltage) and Pad 3 (GND) with wiper connected to
Pad 1 (Voltage Control). Please specify reference voltage as a
part of the ordering code.
Note: Please contact our sales ofce if a reference voltage is
required in combination with sine or clipped sinewave output
Environmental
Vibration: IEC 60068-2-6 Test Fc Procedure B4, 10-60Hz
▪1.5mm displacement, 60 –2000Hz at 98.1 ms–2, 30 minutes
in each of three mutually perpendicular planes at 1 octave
per minute
Shock: IEC 60068-2-27 Test Ea, 980ms
▪–2 acceleration for
6ms duration, 3 shocks in each direction along three mutually
perpendicular planes
Solderabiltiy: MIL-STD-202, Method 208, Category 3
▪
Marking Includes
Factory Code + Part Number (E and four digits) + Frequency
▪(MHz) + Pad 1 / Static sensitivity identier (Triangle) + Date
code
Packaging
Bulk or Tape & Reel
▪
Minimum Order Information Required
Frequency + Model Number + Frequency Stability vs
▪Operating Temperature Range Code + Reference Voltage
Code + Frequency Adjustment Code
TCXOs
IQD Frequency Products Ltd, Station Road, Crewkerne, Somerset TA18 8AR, United Kingdom
Tel: +44 (1460) 270200; Fax: +44 (1460) 72578;
Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com
Phase Noise (typical gures)
Frequency Frequency offset from
carrier: 10Hz
Frequency offset from
carrier: 100Hz
Frequency offset from
carrier: 1kHz
Frequency offset from
carrier: 10kHz
Frequency offset from
carrier: 100kHz
13.0MHz –95 dBc/Hz –120 dBc/Hz –135 dBc/Hz –140 dBc/Hz –145 dBc/Hz
Electrical Specication - limiting values
Frequency Range Supply Voltage Output Voltage Output Levels Rise Time (tr) Fall Time (tf) Duty Cycle Model Number
1.0MHz to 50.0MHz 3.3V ±10% HCMOS 15pF VoH > 90% Vs
VoL < 10% Vs
8ns 8ns 45/55% CFPT-9058
1.0MHz to 50.0MHz 5.0V ±10% HCMOS 15pF VoH > 90% Vs
VoL < 10% Vs
7ns 7ns 45/55% CFPT-9051
8.0MHz to 50.0MHz 3.3V ±10% Sine 10kW//10pF <20.0MHz: > 1.0Vpp
>20.0MHz: > 0.5Vpp
– – CFPT-9059
8.0MHz to 50.0MHz 5.0V ±10% Sine 10kW//10pF <20.0MHz: > 1.0Vpp
>20.0MHz: > 0.5Vpp
– – CFPT-9053
1.0MHz to 80.0MHz 3.3V ±10% ACMOS 15pF VoH > 90% Vs
VoL < 10% Vs
3ns 3ns 45/55% CFPT-9060
1.0MHz to 80.0MHz 5.0V ±10% ACMOS 15pF VoH > 90% Vs
VoL < 10% Vs
2ns 2ns 45/55% CFPT-9055
8.0MHz to 50.0MHz 3.3V ±10% Clipped Sine
10kW//10pF
Vpk-pk > 0.8V – – CFPT-9061
8.0MHz to 50.0MHz 5.0V ±10% Clipped Sine
10kW//10pF
Vpk-pk > 0.8V – – CFPT-9057
Frequency Stability Available over Operating Temperature Ranges
Operating
Temperature Ranges
Frequency Stabilities v Operating Temperature Range
±0.3ppm ±0.5ppm ±1.0ppm ±1.5ppm ±2.0ppm ±2.5ppm
0 to 50°C Code AP Code EP Code FP Code CP Code GP Code HP
0 to 70°C Code AC Code EC Code FC Code CC Code GC Code HC
–20 to 70°C Code AS* Code ES Code FS Code CS Code GS Code HS
–30 to 75°C – Code EU Code FU Code CU Code GU Code HU
–40 to 85°C – Code EX* Code FX Code CX Code GX Code HX
–55 to 105°C – – Code FY* Code CY Code GY Code HY
Ordering Example 10.0MHz CFPT-9051 CS 1 A
Frequency
Model Number
Frequency Stability vs Operating Temperature Code
Reference Voltage Code
Frequency Adjustment Code
(For reference voltage and frequency adjustment codes see main text)
Note: *Codes may not be available for all frequencies
TCXOs
IQD Frequency Products Ltd, Station Road, Crewkerne, Somerset TA18 8AR, United Kingdom
Tel: +44 (1460) 270200; Fax: +44 (1460) 72578;
Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com
Outline (mm)
2.54
1.3
Pad Connections
1 Voltage Control
(optional-if not used
do not connect)
2 Tri-state control
3 GND
4 Output
5 Vref(optional-HCMOS/ACMOS
only, if not used do not connect)
6 +Vs
6.2 max
14.7 max
1 2 3
1.0
4
5
6
2.54 9.2 max
1.50
0.75
0.70
5.08
8.64
2.54
1.27
Output Waveform
tr
tf
tT
90%Vs
10%Vs
50%Vs
Duty cycle = t x 100(%)
T
Test Circuit
123
4
5
Output
V Control
V Supply
Tri-state
control
6
100nF
C Load
50k
Ω
*Inclusive of jig and probe capacitance**DC cut capacitor
required for AC coupled clipped sinewave