A Product Line of Diodes Incorporated Green FZT751 PNP SILICON PLANAR HIGH PERFORMANCE TRANSISTOR IN SOT223 Features * * * * * * * Mechanical Data * * * * * BVCEO > 60V Maximum continuous current IC(cont) = 3A Low Saturation Voltage Complementary Type - FZT651 Lead-Free Finish; RoHS compliant (Note 1) Halogen and Antimony Free. "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability Case: SOT223 UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish Weight: 0.112 grams (approximate) SOT223 C E B C C B E Top View Top View Pin-Out Device Symbol Ordering Information (Notes 3 & 4) Product FZT751TA FZT751QTA FZT751TC FZT751QTC Notes: Grade Commercial Automotive Commercial Automotive Marking FZT751 FZT751 FZT751 FZT751 Reel size (inches) 7 7 13 13 Tape width (mm) 12 12 12 12 Quantity per reel 1,000 1,000 4,000 4,000 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. Halogen and Antimony free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 3. For packaging details, go to our website at http://www.diodes.com. 4. Products with Q-suffix are automotive grade. Automotive products are electrical and thermal the same as the commercial, except where specified. Marking Information FZT 751 FZT751 Document Number DS32208 Rev. 6 - 2 FZT751 = Product Type Marking Code 1 of 7 www.diodes.com February 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FZT751 Maximum Ratings @TA = 25C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value -80 -60 -5 -3 -6 Unit V V V A A Value 2 3 62.5 41.7 12.93 -55 to +150 Unit W W C/W C/W C/W C Thermal Characteristics @TA = 25C unless otherwise specified Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Leads Operating and Storage Temperature Range Notes: Symbol (Note 5) (Note 6) (Note 5) (Note 6) (Note 7) PD RJA RJL TJ, TSTG 5. For devices mounted on 25mm x 25mm single sided 2oz weight copper, in still air conditions. 6. For devices mounted on 50mm x 50mm single sided 2oz weight copper, in still air conditions. 7. Thermal resistance from junction to solder-point (at the end of the collector lead) FZT751 Document Number DS32208 Rev. 6 - 2 2 of 7 www.diodes.com February 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FZT751 10 VCE(sat) IC Collector Current (A) IC Collector Current (A) Thermal Characteristics Limit 1 DC 1s 100ms 100m 10ms T amb=25C 25mm x 25mm 2oz FR4 10m 10 VCE(sat) Limit 1 DC 1s 100ms 10ms 100m 1ms 100s 1 Tamb=25C 10m 10 50 60 25mm x 25mm 2oz FR4 50 D=0.5 30 20 Single Pulse D=0.2 D=0.05 10 D=0.1 0 100 1m 10m 100m 1 10 100 1k Pulse Width (s) T ra n sie n t T h e rm a l Im p e d a n c e Single Pulse Tamb=25C 100 50mm x 50mm 2oz FR4 10 25mm x 25mm 2oz FR4 1 100 1m 10m 100m 1 10 100 Pulse Width (s) 1k Tamb=25C 40 50mm x 50mm 2oz FR4 30 D=0.5 20 D=0.05 0 100 Document Number DS32208 Rev. 6 - 2 D=0.1 1m 10m 100m 1 10 100 1k Pulse Width (s) 3.0 50mm x 50mm 2oz FR4 2.5 25mm x 25mm 2oz FR4 2.0 1.5 1.0 0.5 0.0 0 Pulse Power Dissipation FZT751 Single Pulse D=0.2 10 Transient Thermal Impedance Max Power Dissipation (W) Tamb=25C Thermal Resistance (C/W) 70 Thermal Resistance (C/W) 10 VCE Collector-Emitter Voltage (V) S a fe O p e ra tin g A re a Safe Operating Area Max Power Dissipation (W) 100s 1 VCE Collector-Emitter Voltage (V) 40 1ms 50mm x 50mm 2oz FR4 20 40 60 80 100 120 140 160 Temperature (C) Derating Curve 3 of 7 www.diodes.com February 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FZT751 Electrical Characteristics @TA = 25C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 8) Emitter-Base Breakdown Voltage Symbol BVCBO BVCEO BVEBO Min -80 -60 -5 - - - - - - - 70 100 80 40 Typ - - - - - - -0.15 -0.45 -0.9 -0.8 200 200 170 150 Max - - - -0.1 -10 -0.1 -0.3 -0.6 -1.25 -1.0 - 300 - - Unit V V V fT 100 140 - MHz ton toff Cobo - - - 40 450 - - - 30 ns ns pF Collector Cut-off Current ICBO Emitter Cut-off Current IEBO Collector-Emitter Saturation Voltage (Note 8) VCE(sat) Base-Emitter Saturation Voltage (Note 8) Base-Emitter Turn-On Voltage (Note 8) VCE(sat) VBE(on) DC Current Gain (Note 8) Current Gain-Bandwidth Product (Note 8) Turn-On Time Turn-Off Time Output Capacitance (Note 8) Notes: hFE A A V V V - Test Condition IC = -100A IC = -10mA IE = -100A VCB = -60V VCB = -60V, Tamb = 100C VEB = -4V IC = -1A, IB = -100mA IC = -3A, IB = -300mA IC = -1A, IB = -100mA IC = -1A, VCE = -2V IC = -50mA, VCE = -2V IC = -500mA, VCE = -2V IC = -1A, VCE = -2V IC = -2A, VCE = -2V VCE = -5V, IC = -100mA f = 100MHz VCC = -10V, IC = -500mA IB1 = IB2 = -50mA VCB = -10V, f = 1MHz 8. Measured under pulsed conditions. Pulse width 300 s. Duty cycle 2% FZT751 Document Number DS32208 Rev. 6 - 2 4 of 7 www.diodes.com February 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FZT751 Typical Characteristics FZT751 Document Number DS32208 Rev. 6 - 2 5 of 7 www.diodes.com February 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FZT751 Package Outline Dimensions SOT223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e -- -- 4.60 e1 -- -- 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm A A1 Suggested Pad Layout X1 Y1 C1 Y2 Dimensions X1 X2 Y1 Y2 C1 C2 Value (in mm) 3.3 1.2 1.6 1.6 6.4 2.3 C2 X2 FZT751 Document Number DS32208 Rev. 6 - 2 6 of 7 www.diodes.com February 2012 (c) Diodes Incorporated A Product Line of Diodes Incorporated FZT751 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. B. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devicesor systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2012, Diodes Incorporated www.diodes.com FZT751 Document Number DS32208 Rev. 6 - 2 7 of 7 www.diodes.com February 2012 (c) Diodes Incorporated