RN4983
2019-11-28
1
© 2019
Toshi ba Elect ronic Devices & Storage Corporation
TOSHIBA T r ansistor Silicon NPN/PNP Epitaxial Type (PCT Process) (Transistor with Bui lt -in Bi as Resi stor)
RN4983
Switching, Inverter Circuit, Interface Circuit and Driver Circuit
AEC-Q101 Qualified (Note1)
Including two devices in US6 (ultra super mini type with 6 leads)
With built-in bias resistors
Simplify circuit design
Reduce a quantity of parts and manufacturing process and miniaturize
equipment.
Note1: For detail information, please contact to our sales.
Equivalent Circuit and Bias Resister Values
R1: 22 kΩ
R2: 22 kΩ
(Q1, Q2 Common)
Q1 Absolute Maximum Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Collector-base voltage VCBO 50 V
Collector-emitter voltage VCEO 50 V
Emitter-base voltage VEBO 10 V
Collector current IC 100 mA
Q2 Absolute Maximum Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Collector-base voltage VCBO −50 V
Collector-emitter voltage VCEO −50 V
Emitter-base voltage VEBO −10 V
Collector current IC −100 mA
JEDEC ―
JEITA ―
TOSHIBA 2-2J1A
Weight: 6.8mg (typ.)
Unit: mm
Start of commercial production
1992-10
RN4983
2019-11-28
2
© 2019
Toshi ba Elect ronic Devices & Storage Corporation
Q1, Q2 Common Absolute Max i m um Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Collect or power dissipation PC * 200 mW
Junction temperature Tj 150 °C
Storage temperature range Tstg −55 to 150 °C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant
change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
* Total rating
Marking
Equivalent Circuit (Top View)
RN4983
2019-11-28
3
© 2019
Toshi ba Elect ronic Devices & Storage Corporation
Q1 Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Collector cut-off current ICBO VCB = 50 V, IE = 0 mA ― ― 100 nA
ICEO VCE = 50 V, IB = 0 mA ― ― 500
Emitter cut-off current
IEBO VEB = 10 V, IC = 0 mA 0.17 ― 0.33 mA
DC current gain
hFE VCE = 5 V, IC = 10 mA 70 ― ― ―
Collector-emitter saturation voltage
VCE (sat) IC = 5 mA, IB = 0.25 mA ― 0.1 0.3 V
Input volt age (ON) VI (ON) VCE = 0.2 V, IC = 5 mA 1.3 ― 3.0 V
Input volt age (OFF) VI (OFF) VCE = 5 V, IC = 0.1 mA 1.0 ― 1.5 V
Transit i on frequency fT VCE = 10 V, IC = 5 mA ― 250 ― MHz
Collect or output capacitance Cob VCB = 10 V, IE = 0 mA, f = 1 MHz ― 3 6 pF
Q2 Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Collector cut-off current ICBO VCB = −50 V, IE = 0 mA ― ― −100 nA
ICEO VCE = −50 V, IB = 0 mA ― ― −500
Emitter cut-off current
IEBO VEB = −10 V, IC = 0 mA −0.17 ― −0.33 mA
DC current gain
hFE VCE = −5 V, IC = −10 mA 70 ― ― ―
Collector-emitter saturation voltage
VCE (sat) IC = −5 mA, IB = −0.25 mA ― −0.1 −0.3 V
Input volt age (ON) VI (ON) VCE = −0.2 V, IC = −5 mA −1.3 ― −3.0 V
Input volt age (OFF) VI (OFF) VCE = −5 V, IC = −0.1 mA −1.0 ― −1.5 V
Transit i on frequency fT VCE = −10 V, IC = −5 mA ― 200 ― MHz
Collect or output capacitance Cob VCB = −10 V, IE = 0 mA, f = 1 MHz
― 3 6 pF
Q1, Q2 Common Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min Typ. Max Unit
Input resistor R1 ― 15.4 22 28.6 kΩ
Resistor rati o R1/R2 ― 0.9 1.0 1.1 ―
RN4983
2019-11-28
4
© 2019
Toshi ba Elect ronic Devices & Storage Corporation
Characteristics Curves Q1
RN4983
2019-11-28
5
© 2019
Toshi ba Elect ronic Devices & Storage Corporation
Characteristics Curves Q2
unless otherw ise not ed.
(µA)
RN4983
2019-11-28
6
© 2019
Toshi ba Elect ronic Devices & Storage Corporation
RESTRICTIONS ON PRODUCT USE
Toshi ba Corporation and its s ubsi diaries and affiliates are collecti vely ref erred to as “TOSHIBA”.
Hardware, soft ware and systems described in this document are collec t i vel y referred to as “Product”.
• TOSHIBA reserves the ri ght to m ake changes to the informat i on in this document and related Product without notic e.
• This document and any information herein may not be reproduced without pri or writt en permiss i on from TOSHIBA. Even with TOSHIBA's
written permissi on, reproduc t i on is permissible only if reproduction is without alterat i on/omission.
• Though TOSHIBA works continually t o improve Product 's qual it y and reliabili ty, Product can malfunction or fail. Customers are responsible for
complying with saf ety standards and for providi ng adequate designs and safeguards for their hardware, software and systems which
minimi ze risk and avoid situati ons in which a malfuncti on or fail ure of Product could caus e loss of human life, bodily injury or damage to
property, including data loss or corruption. Before customers use the Product, create designs i ncludi ng the Product, or incorporat e the
Product into their own applic ati ons, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA i nformation,
including without limi t ation, this document, the specifications, the data sheets and applic ation notes f or Product and t he precautions and
conditi ons set fort h in the "TOSHIBA Semiconductor Rel i abi lit y Handbook" and (b) the inst ruct i ons for the applicati on with which the Product
will be used with or for. Cust om ers are solel y responsible for all aspects of their own product design or applic ations, including but not limited
to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the
applicabil ity of any inf orm ation contained in this document, or in charts, diagrams, programs, algori thms, sample application ci rcuits , or any
other referenced docum ents; and (c) validating all operating parameters for such designs and applic at ions . TOSHIBA ASSU M ES NO
LI ABILITY FOR CUSTOMERS' PRODUCT DESI G N OR APPL ICATIONS .
• PRODUCT IS NEI THE R INTENDE D NO R WARR ANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALI TY AND/ O R RE L IABILITY, AND/OR A MALFUNCTION OR FAI L URE OF WHICH MAY
CAUSE LOSS OF HUMAN LI F E, BODILY INJURY, SERIOUS P ROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). E xcept for s peci f ic applications as expressly stated in this document, Unintended Use i ncludes, without l imi tation,
equipment used in nuclear faciliti es, equipm ent us ed in the aerospace indust ry, lifesaving and/or life supporting medical equipment,
equipment used for automobiles, trains, ships and other transport ation, t raffic signaling equipment, equipment used to control combustions or
explosions, saf et y devices, elevators and esc al ators, and devices related t o power plant. IF YOU USE PRODUCT FOR UNINTENDED USE,
TOSHIBA ASSUMES NO LI ABILITY FOR PRODUCT. F or details, please cont act your TOSHIBA sales representative or contact us via our
website.
• Do not disassemble, anal yze, reverse-engineer, alter, modif y, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated int o any products or systems whose manufact ure, us e, or sale is prohibit ed under any
applicable l aws or regulations.
• The information cont ai ned herein is presented onl y as guidance for Product use. No responsi bility is assumed by TOSHIBA f or any
infringement of patents or any other intellect ual property ri ght s of thi rd parties t hat may result f rom the use of Product. No license to any
intellect ual propert y right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITI ONS OF SALE FOR
PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOS HIBA (1) ASSUMES NO LIABILITY WHATSOEV ER,
INCLUDING WITHOUT LIMITATI O N, INDIRECT, CONSEQUENTI AL, SPECIAL, OR INCIDENTAL DAM AGES OR LOSS, I NCL UDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITI ES, BUSINESS I NTERRUPTIO N AND LOSS OF DATA, AND (2)
DISCLAIMS ANY AND ALL EXPRESS OR IMP LIED WARRANTIES AND CONDITI O NS RELATED TO SALE, USE OF PRODUCT, OR
INFORMATIO N, INCLUDI NG WARRANTIES O R CO NDITIONS OF MERCHANTABILITY, F ITNESS FOR A PARTICULAR PURPOSE,
ACCUR ACY OF INFORM ATION, OR NONINF RINGEMENT.
• Do not use or otherwise make available Product or related software or tec hnol ogy for any military purposes, i ncl udi ng without l imitation, for
the design, development, use, stock pili ng or manufact uri ng of nuclear, chemical, or biological weapons or missile technology products (mass
destructi on weapons). Produc t and related software and technol ogy may be controlled under the applicable export laws and regulations
including, without l imitat i on, t he Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regul ations. Export
and re-export of Product or related software or technol ogy are strictl y prohibi ted except in compliance with all applicable export laws and
regulations.
• Please contact your TOSHIBA sales representative for detai ls as to environmental matters such as the RoHS compatibility of Product. Please
use Product in compliance with all applic abl e l aws and regulations t hat regulat e the incl usion or use of controll ed subst ances, i ncl udi ng
without limitat i on, the EU RoHS Directi ve. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING A S A RESULT
OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGUL ATIONS.
https://toshiba.semicon-storage.com/