To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9
February 2011
FOD3182
3A Output Current, High Speed MOSFET Gate Driver
Optocoupler
Features
■High noise immunity characterized by 50kV/µs (Typ.)
common mode rejection @ VCM = 2,000V
■Guaranteed operating temperature range of
-40°C to +100°C
■3A peak output current
■Fast switching speed
– 210ns max. propagation delay
– 65ns max pulse width distortion
■Fast output rise/fall time
– Offers lower dynamic power dissipation
■250kHz maximum switching speed
■Wide VDD operating range: 10V to 30V
■Use of P-Channel MOSFETs at output stage
enables output voltage swing close to the supply rail
(rail-to-rail output)
■5000Vrms, 1 minute isolation
■Under voltage lockout protection (UVLO) with
hysteresis – optimized for driving MOSFETs
■Minimum creepage distance of 8.0mm
■Minimum clearance distance of 10mm to 16mm
(option TV or TSV)
■Minimum insulation thickness of 0.5mm
■UL and VDE*
■1,414 peak working insulation voltage (VIORM)
*Requires ‘V’ ordering option
Applications
■Plasma Display Panel
■High performance DC/DC convertor
■High performance switch mode power supply
■High performance uninterruptible power supply
■Isolated Power MOSFET gate drive
Description
The FOD3182 is a 3A Output Current, High Speed
MOSFET Gate Drive Optocoupler. It consists of a
aluminium gallium arsenide (AlGaAs) light emitting diode
optically coupled to a CMOS detector with PMOS and
NMOS output power transistors integrated circuit power
stage. It is ideally suited for high frequency driving of
power MOSFETS used in Plasma Display Panels
(PDPs), motor control inverter applications and high
performance DC/DC converters.
The device is packaged in an 8-pin dual in-line housing
compatible with 260°C reflow processes for lead free
solder compliance.
Functional Block Diagram Package Outlines
8
8
1
8
1
1
8
1
1
2
3
4
8
7
6
5
NC
ANODE
CATHODE
NC
VDD
VO2
VO1
VSS
Note:
A 0.1µF bypass capacitor must be connected between pins 5 and 8.
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 2
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Truth Table
Pin Definitions
LED
V
DD
–
V
SS
“Positive Going”
(Turn-on)
V
DD
–
V
SS
“Negative Going”
(Turn-off) V
O
Off 0V to 30V 0V to 30V Low
On 0V to 7.4V 0V to 7V Low
On 7.4V to 9V 7V to 8.5V Transition
On 9V to 30V 8.5V to 30V High
Pin # Name Description
1NCNot Connected
2 Anode LED Anode
3 Cathode LED Cathode
4NCNot Connected
5V
SS
Negative Supply Voltage
6V
O2
Output Voltage 2 (internally connected to V
O1
)
7V
O1
Output Voltage 1
8V
DD
Positive Supply Voltage
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 3
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Safety and Insulation Ratings
As per DIN EN/IEC 60747-5-2. This optocoupler is suitable for “safe electrical insulation” only within the safety
limit data. Compliance with the safety ratings shall be ensured by means of protective circuits.
Symbol Parameter Min. Typ. Max. Unit
Installation Classifications per DIN VDE 0110/1.89 Table 1
For Rated Mains Voltage < 150Vrms I–IV
For Rated Mains Voltage < 300Vrms I–IV
For Rated Mains Voltage < 450Vrms I–III
For Rated Mains Voltage < 600Vrms I–III
For Rated Mains Voltage < 1000Vrms (Option T, TS) I–III
Climatic Classification 40/100/21
Pollution Degree (DIN VDE 0110/1.89) 2
CTI Comparative Tracking Index 175
V
PR
Input to Output Test Voltage, Method b,
V
IORM
x 1.875 = V
PR
, 100% Production Test with
tm = 1 sec., Partial Discharge < 5pC
2651
Input to Output Test Voltage, Method a,
V
IORM
x 1.5 = V
PR
, Type and Sample Test with
tm = 60 sec.,Partial Discharge < 5 pC
2121
V
IORM
Max Working Insulation Voltage 1,414 V
peak
V
IOTM
Highest Allowable Over Voltage 6000 V
peak
External Creepage 8 mm
External Clearance 7.4 mm
External Clearance (for Option T or TS - 0.4” Lead Spacing) 10.16 mm
Insulation Thickness 0.5 mm
Safety Limit Values – Maximum Values Allowed in the
Event of a Failure
T
Case
Case Temperature 150 °C
I
S,INPUT
Input Current 25 mA
P
S,OUTPUT
Output Power (Duty Factor
≤
2.7%) 250 mW
R
IO
Insulation Resistance at T
S
, V
IO
= 500V 10
9
Ω
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 4
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
Parameter
Value Units
T
STG
Storage Temperature -40 to +125 °C
T
OPR
Operating Temperature -40 to +100 °C
T
J
Junction Temperature -40 to +125 °C
T
SOL
Lead Solder Temperature – Wave solder
(Refer to Reflow Temperature Profile, pg. 22)
260 for 10 sec. °C
I
F(AVG)
Average Input Current
(1)
25 mA
I
F(tr, tf)
LED Current Minimum Rate of Rise/Fall 250 ns
V
R
Reverse Input Voltage 5 V
I
OH(PEAK)
“High” Peak Output Current
(2)
3A
I
OL(PEAK)
“Low” Peak Output Current
(2)
3A
V
DD
– V
SS
Supply Voltage -0.5 to 35 V
V
O(PEAK)
Output Voltage 0 to V
DD
V
P
O
Output Power Dissipation
(4)
250 mW
P
D
Total Power Dissipation
(5)
295 mW
Symbol
Parameter
Value Units
V
DD
– V
SS
Power Supply 10 to 30 V
I
F(ON)
Input Current (ON) 10 to 16 mA
V
F(OFF)
Input Voltage (OFF) -3.0 to 0.8 V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 5
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Electrical-Optical Characteristics (DC)
Apply over all recommended conditions, typical value is measured at V
DD
= 30V, V
SS
= 0V, T
A
= 25°C,
unless otherwise specified.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
I
OH
High Level Output Current V
OH
= (V
DD
– V
SS
– 1V) 0.5 0.9 A
V
OH
= (V
DD
– V
SS
– 6V) 2.5
I
OL
Low Level Output Current V
OL
= (V
DD
– V
SS
+ 1V) 0.5 1 A
V
OL
= (V
DD
– V
SS
+ 6V) 2.5
V
OH
High Level Output Voltage
(5)(6)
I
O
= -100mA V
DD
– 0.5 V
V
OL
Low Level Output Voltage
(5)(6)
I
O
= 100mA V
SS
+ 0.5 V
I
DDH
High Level Supply Current Output Open,
I
F
= 10 to 16mA
2.6 4.0 mA
I
DDL
Low Level Supply Current Output Open,
V
F
= -3.0 to 0.8V
2.5 4.0 mA
I
FLH
Threshold Input Current Low to
High
I
O = 0mA, VO > 5V 3.0 7.5 mA
VFHL Threshold Input Voltage High to Low IO = 0mA, VO < 5V 0.8 V
VFInput Forward Voltage IF = 10mA 1.1 1.43 1.8 V
∆VF/T
ATemperature Coefficient of Forward
Voltage
IF = 10mA -1.5 mV/°C
VUVLO+ UVLO Threshold VO > 5V, IF = 10mA 7 8.3 9 V
VUVLO– VO < 5V, IF = 10mA 6.5 7.7 8.5 V
UVLOHYST UVLO Hysteresis 0.6 V
BVRInput Reverse Breakdown Voltage IR = 10µA 5 V
CIN Input Capacitance f = 1MHz, VF = 0V 25 pF
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 6
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Switching Characteristics
Apply over all recommended conditions, typical value is measured at VDD = 30V, VSS = 0V, TA = 25°C,
unless otherwise specified.
Isolation Characteristics
*Typical values at TA = 25°C
Symbol Parameter Test Conditions Min. Typ. Max. Unit
tPLH Propagation Delay Time to High Output Level(7) IF = 10mA,
Rg = 10Ω,
f = 250kHz,
Duty Cycle = 50%,
Cg = 10nF
50 120 210 ns
tPHL Propagation Delay Time to Low Output Level(7) 50 145 210 ns
PWD Pulse Width Distortion(8) 35 65 ns
PDD
(tPHL – tPLH)
Propagation Delay Difference Between Any
Two Parts(9)
-90 90 ns
trRise Time CL = 10nF,
Rg = 10Ω
38 ns
tfFall Time 24 ns
tUVLO ON UVLO Turn On Delay 2.0 µs
tUVLO OFF UVLO Turn Off Delay 0.3 µs
| CMH | Output High Level Common Mode Transient
Immunity(10) (11)
TA = +25°C,
If = 7mA to 16mA,
VCM = 2kV,
VDD = 30V
35 50 kV/µs
| CML | Output Low Level Common Mode Transient
Immunity(10) (12)
TA = +25°C,
Vf = 0V,
VCM = 2kV,
VDD = 30V
35 50 kV/µs
Symbol Parameter Test Conditions Min. Typ.* Max. Unit
VISO Withstand Isolation Voltage(13) (14) TA = 25°C,
R.H. < 50%, t = 1min.,
II-O ≤ 10µA
5000 Vrms
RI-O Resistance (input to output)(14) VI-O = 500V 1011 Ω
CI-O Capacitance (input to output) Freq. = 1MHz 1 pF
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 7
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Notes:
1. Derate linearly above +79°C free air temperature at a rate of 0.37mA/°C.
2. Maximum pulse width = 10µs, maximum duty cycle = 11%.
3 Derate linearly above +79°C, free air temperature at the rate of 5.73mW/°C.
4. No derating required across operating temperature range.
5. In this test, VOH is measured with a dc load current of 100mA. When driving capacitive load VOH will approach VDD
as IOH approaches zero amps.
6. Maximum pulse width = 1ms, maximum duty cycle = 20%.
7. tPHL propagation delay is measured from the 50% level on the falling edge of the input pulse to the 50% level of the
falling edge of the VO signal. tPLH propagation delay is measured from the 50% level on the rising edge of the input
pulse to the 50% level of the rising edge of the VO signal.
8. PWD is defined as | tPHL – tPLH | for any given device.
8. The difference between tPHL and tPLH between any two FOD3182 parts under same operating conditions, with
equal loads.
10. Pin 1 and 4 need to be connected to LED common.
11. Common mode transient immunity in the high state is the maximum tolerable dVCM/dt of the common mode pulse
VCM to assure that the output will remain in the high state (i.e. VO > 15V).
12. Common mode transient immunity in a low state is the maximum tolerable dVCM/dt of the common mode pulse,
VCM, to assure that the output will remain in a low state (i.e. VO < 1.0V).
13. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage > 6000Vrms,
60Hz for 1 second (leakage detection current limit II-O < 10µA).
14. Device considered a two-terminal device: pins on input side shorted together and pins on output side shorted
together.
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 8
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Typical Performance Curves
Fig. 2 Output High Voltage Drop vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
(V
OH
- V
DD
) – HIGH OUTPUT VOLTAGE DROP (V)
0.00
-0.05
-0.10
-0.15
-0.20
-0.25
-0.30
TA
– AMBIENT TEMPERATURE (°C)
Fig. 1 Output High Voltage Drop vs. Output High Current
0 0.5 1.0 1.5 2.0 2.5
(V
OH
- V
DD
) – HIGH OUTPUT VOLTAGE DROP (V)
0.5
0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.-0
-3.5
IOH
– OUTPUT HIGH CURRENT (A)
V
DD
= 15V to 30V
V
SS
= 0V
I
F
= 10mA to 16mA
I
O
= -100mA
Fig. 6 Output Low Voltage vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
V
OL
– OUTPUT LOW VOLTAGE (V)
0.30
0.25
0.20
0.15
0.10
0.05
0
TA
– AMBIENT TEMPERATURE (°C)
V
DD
= 15V to 30V
V
SS
= 0V
V
F
= -3V to 0.8V
I
O
= 100mA
Fig. 3 Output High Current vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
I
OH
– OUTPUT HIGH CURRENT (A)
8
6
4
2
0
TA
– AMBIENT TEMPERATURE (°C)
Frequency = 200Hz
Duty Cycle = 0.2%
I
F
= 10mA to 16mA
V
DD
= 15V to 30V
Frequency = 200Hz
Duty Cycle = 0.1%
I
F
= 10mA to 16mA
V
DD
= 15V to 30V
V
SS
= 0V
T
A
=100°C
T
A
= 25°C
T
A
= -40°C
Fig. 5 Output Low Voltage vs. Output Low Current
0 0.5 1.0 1.5 2.0 2.5
V
OL
– OUTPUT LOW VOLTAGE (V)
4
3
2
1
0
IOL
– OUTPUT LOW CURRENT (A)
Frequency = 200Hz
Duty Cycle = 99.9%
V
F
(off) = 0.8V
V
DD
= 15V to 30V
V
SS
= 0V
T
A
=100°C
T
A
= 25°C
T
A
= -40°C
V
O
= 6V
V
O
= 3V
Fig. 4 Output High Current vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
I
OH
– OUTPUT HIGH CURRENT (A)
8
6
4
2
0
TA
– AMBIENT TEMPERATURE (°C)
Frequency = 100Hz
Duty Cycle = 0.5%
I
F
= 10mA to 16mA
V
DD
= 15V to 30V
V
O
= 6V
V
O
= 3V
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 9
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Typical Performance Curves (Continued)
Fig. 7 Output Low Current vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
I
OL
– OUTPUT LOW CURRENT (A)
8
6
4
2
0
TA
– AMBIENT TEMPERATURE (°C)
Frequency = 200Hz
Duty Cycle = 99.8%
V
F
= 0.8V
V
DD
= 15V to 30V
V
O
= 6V
V
O
= 3V
Fig. 8 Output Low Current vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
I
OL
– OUTPUT LOW CURRENT (A)
8
6
4
2
0
TA
– AMBIENT TEMPERATURE (°C)
Frequency = 100Hz
Duty Cycle = 99.5%
V
F
= 0.8V
V
DD
= 15V to 30V
V
O
= 6V
V
O
= 3V
Fig. 9 Supply Current vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
I
DD
– SUPPLY CURRENT (mA)
3.6
3.4
3.2
3.0
2.8
2.6
2.4
2.2
TA
– AMBIENT TEMPERATURE (°C)
V
DD
= 15V to 30V
V
SS
= 0V
I
F
= 0mA (for I
DDL
)
I
F
= 10mA (for I
DDH
)
IDDH(30V)
IDDL(30V)
IDDH(15V)
IDDL(15V)
IDDH
IDDL
Fig. 11 Low-to-High Input Current Threshold
vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
I
FLH
– LOW-to-HIGH INPUT CURRENT THRESHOLD (mA)
3.6
3.4
3.2
3.0
2.8
2.6
2.4
2.2
TA
– AMBIENT TEMPERATURE (°C)
V
DD
= 15V to 30V
V
SS
= 0V
Output = Open
Fig. 10 Supply Current vs. Supply Voltage
15 20 25 30
I
DD
– SUPPLY CURRENT (mA)
3.6
3.2
2.8
2.4
2.0
VDD
– SUPPLY VOLTAGE (V)
I
F
= 0mA (for I
DDL
)
I
F
= 10mA (for I
DDH
)
V
SS
= 0V
T
A
= 25°C
Fig. 12 Propagation Delay vs. Supply Voltage
15 18 21 24 27 30
t
P
– PROPAGATION DELAY (ns)
250
200
150
100
50
VDD
– SUPPLY VOLTAGE (V)
I
F
= 10mA to 16mA
T
A
= 25°C
R
G
= 10Ω
C
G
= 10nF
Duty Cycle = 50%
Frequency = 250kHz
t
PHL
t
PLH
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 10
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Typical Performance Curves (Continued)
Fig. 14 Propagation Delay vs. Ambient Temperature
-40 -20 0 20 40 60 80 100
t
P
– PROPAGATION DELAY (ns)
450
350
250
150
50
TA
– AMBIENT TEMPERATURE (°C)
I
F
= 10mA to 16mA
V
DD
= 15V to 30V
R
G
= 10Ω
C
G
= 10nF
Duty Cycle = 50%
Frequency = 250kHz
Fig. 13 Propagation Delay vs. LED Forward Current
681012 14 18
t
P
– PROPAGATION DELAY (ns)
250
200
150
100
50
IF
– FORWARD LED CURRENT (mA)
V
DD
= 15V to 30V
T
A
= 25°C
R
G
= 10Ω
C
G
= 10nF
Duty Cycle = 50%
Frequency = 250kHz
t
PHL
t
PLH
Fig. 15 Propagation Delay vs. Series Load Resistance
01020304050
t
P
– PROPAGATION DELAY (ns)
450
350
250
150
50
RG
– SERIES LOAD RESISTANCE (Ω)
I
F
= 10mA to 16mA
V
DD
= 15V to 30V
C
G
= 10nF
Duty Cycle = 50%
Frequency = 250kHz
t
PHL
t
PLH
Fig. 16 Propagation Delay vs. Series Load Capacitance
020406080100
t
P
– PROPAGATION DELAY (ns)
450
350
250
150
50
100
10
1
0.1
0.01
0.001
CG
– SERIES LOAD CAPACITANCE (nF)
Fig. 18 Input Forward Current vs. Forward Voltage
0.6 0.8 1.0 1.2 1.4 1.6 1.8
I
F
– FORWARE CURRENT (mA)
VR
– FORWARE VOLTAGE (V)
I
F
= 10mA to 16mA
V
DD
= 15V to 30V
R
G
= 10Ω
Duty Cycle = 50%
Frequency = 250kHz
t
PHL
t
PLH
t
PHL
t
PLH
Fig. 17 Transfer Characteristics
0123 45
V
O
– OUTPUT VOLTAGE (V)
35
30
25
20
15
10
5
0
IF
– FORWARD LED CURRENT (mA)
V
DD
= 30V
T
A
= 25°C
T
A
=100°C 25°C -40°C
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 11
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Typical Performance Curves (Continued)
Fig. 19 Under Voltage Lockout
051015 20
VO
– OUTPUT VOLTAGE (V)
20
18
16
14
12
10
8
6
4
2
0
(VDD – VSS)
– SUPPLY VOLTAGE (V)
(8.30V)
(7.80)
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 12
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Test Circuit
Figure 20. IOL Test Circuit
Figure 21. IOH Test Circuit
+
+
Power Supply
VDD = 10V to 30V
Power Supply
V = 6V
1
2
PW = 4.99ms
Period = 5ms
ROUT = 50Ω
R2
100Ω
Frequency = 200Hz
Duty Cycle = 99.8%
VDD = 10V to 30V
VSS = 0V
VF(OFF) = -3.0V to 0.8V
C1
0.1µF
Pulse-In
LED-IFmon
Pulse Generator
Test Conditions:
3
4
8
7
6
5
To Scope
V
OL
R1
100Ω
C2
47µF
+
C3
0.1µF
D1 C4
47µF
+
Iol
1
2
PW = 10µs
Period = 5ms
ROUT = 50Ω
R2
100Ω
Frequency = 200Hz
Duty Cycle = 0.2%
VDD = 10V to 30V
VSS = 0V
IF = 10mA to 16mA
C1
0.1µF
Pulse-In
LED-IFmon
Pulse Generator
Test Conditions:
3
4
8
7
6
5
Power Supply
VDD = 10V to 30V
+
+
–
Power Supply
V = 6V
To Scope
V
OH
R1
100Ω
C2
47µF
+
C3
0.1µF
D1
Current
Probe
Ioh C4
47µF
+
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 13
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Test Circuit (Continued)
Figure 22. VOH Test Circuit
Figure 23. VOL Test Circuit
1
2
IF = 10 to 16mA
VO
3
4
8
7
6
5
0.1µF
100mA
VDD = 10 to 30V
+
–
1
2
VO
3
4
8
7
6
5
0.1µF
100mA
VDD = 10 to 30V
+
–
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 14
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Test Circuit (Continued)
Figure 24. IDDH Test Circuit
Figure 25. IDDL Test Circuit
1
2
IF = 10 to 16mA
VO
3
4
8
7
6
5
0.1µF
VDD = 30V
+
–
1
2
VF = -0.3 to 0.8V
VO
3
4
8
7
6
5
0.1µF
VDD = 30V
+
–
+
–
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 15
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Test Circuit (Continued)
Figure 26. IFLH Test Circuit
Figure 27. VFHL Test Circuit
Figure 28. UVLO Test Circuit
1
2
VO > 5V
3
4
8
7
6
5
0.1µF
IF
VDD = 10 to 30V
+
–
1
2
VF = –0.3 to 0.8V
VO
3
4
8
7
6
5
0.1µF
VDD = 10 to 30V
+
–
+
–
1
2
VO = 5V
3
4
8
7
6
5
0.1µF
10V or 30V
VDD Ramp
+
–
IF = 10mA
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 16
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Test Circuit (Continued)
Figure 29. tPHL, tPLH, tr and tf Test Circuit and Waveforms
Figure 30. CMR Test Circuit and Waveforms
VO
Probe
F = 250kHz
DC = 50%
IF
VOUT
tPLH
Cg = 10nF
Rg = 10Ω
50Ω
1
2
3
4
8
7
6
5
0.1µF
VDD = 10 to 30V
+
–+
–
trtf
90%
50%
10%
tPHL
1
2
A
B
VO
3
4
8
7
6
5
0.1µF
VDD = 30V
VCM = 2,000V
IF
+
–
5V +
–
∆t
VCM
VO
Switch at A: IF = 10mA
Switch at B: IF = 0mA
VOH
VOVOL
0V
+ –
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 17
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Ordering Information
Marking Information
Part Number Package Packing Method
FOD3182 DIP 8-Pin Tube (50 units per tube)
FOD3182S SMT 8-Pin (Lead Bend) Tube (50 units per tube)
FOD3182SD SMT 8-Pin (Lead Bend) Tape and Reel (1,000 units per reel)
FOD3182V DIP 8-Pin, IEC60747-5-2 option Tube (50 units per tube)
FOD3182SV SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-2 option Tube (50 units per tube)
FOD3182SDV SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-2 option Tape and Reel (1,000 units per reel)
FOD3182TV DIP 8-Pin, 0.4” Lead Spacing, DIN EN/IEC 60747-5-2 option Tube (50 units per tube)
FOD3182TSV SMT 8-Pin, 0.4” Lead Spacing, DIN EN/IEC 60747-5-2 option Tube (50 units per tube)
FOD3182TSR2 SMT 8-Pin, 0.4” Lead Spacing Tape and Reel (700 units per reel)
FOD3182TSR2V SMT 8-Pin, 0.4” Lead Spacing, DIN EN/IEC 60747-5-2 option Tape and Reel (700 units per reel)
1
2
6
43 5
Definitions
1Fairchild logo
2Device number
3VDE mark (Note: Only appears on parts ordered with
DIN EN/IEC 60747-5-2 option – See order entry table)
4Two digit year code, e.g., ‘11’
5Two digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
3182
BYY
XXV
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 18
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Carrier Tape Specifications – Option S
Symbol Description Dimension in mm
WTape Width 16.0 ± 0.3
tTape Thickness 0.30 ± 0.05
P0Sprocket Hole Pitch 4.0 ± 0.1
D0Sprocket Hole Diameter 1.55 ± 0.05
E Sprocket Hole Location 1.75 ± 0.10
FPocket Location 7.5 ± 0.1
P22.0 ± 0.1
PPocket Pitch 12.0 ± 0.1
A0Pocket Dimensions 10.30 ±0.20
B010.30 ±0.20
K04.90 ±0.20
W1Cover Tape Width 13.2 ± 0.2
dCover Tape Thickness 0.1 max
Max. Component Rotation or Tilt 10°
R Min. Bending Radius 30
d
0
P
t2
D0
1
1
W
User Direction of Feed
0
K
B0
A0W
E
D
F
P
P
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 19
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Carrier Tape Specifications – Option TS
Symbol Description Dimension in mm
WTape Width 24.0 ± 0.3
tTape Thickness 0.40 ± 0.1
P0Sprocket Hole Pitch 4.0 ± 0.1
D0Sprocket Hole Diameter 1.55 ± 0.05
E Sprocket Hole Location 1.75 ± 0.10
FPocket Location 11.5 ± 0.1
P22.0 ± 0.1
PPocket Pitch 16.0 ± 0.1
A0Pocket Dimensions 12.80 ± 0.1
B010.35 ± 0.1
K05.7 ±0.1
W1Cover Tape Width 21.0 ± 0.1
dCover Tape Thickness 0.1 max
Max. Component Rotation or Tilt 10°
R Min. Bending Radius 30
d
0
P
t2
D0
1
1
W
User Direction of Feed
0
K
B0
A0W
E
D
F
P
P
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD3182 Rev. 1.0.9 20
FOD3182 — 3A Output Current, High Speed MOSFET Gate Driver Optocoupler
Reflow Profile
Profile Freature Pb-Free Assembly Profile
Temperature Min. (Tsmin) 150°C
Temperature Max. (Tsmax) 200°C
Time (tS) from (Tsmin to Tsmax) 60–120 seconds
Ramp-up Rate (tL to tP) 3°C/second max.
Liquidous Temperature (TL) 217°C
Time (tL) Maintained Above (TL) 60–150 seconds
Peak Body Package Temperature 260°C +0°C / –5°C
Time (tP) within 5°C of 260°C 30 seconds
Ramp-down Rate (TP to TL) 6°C/second max.
Time 25°C to Peak Temperature 8 minutes max.
Time (seconds)
Temperature (°C)
Time 25°C to Peak
260
240
220
200
180
160
140
120
100
80
60
40
20
0
TL
ts
tL
tP
TP
Tsmax
Tsmin
120
Preheat Area
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
240 360
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
