Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FOD3182 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Features Applications High noise immunity characterized by 50kV/s (Typ.) common mode rejection @ VCM = 2,000V Guaranteed operating temperature range of -40C to +100C 3A peak output current Fast switching speed - 210ns max. propagation delay - 65ns max pulse width distortion Fast output rise/fall time - Offers lower dynamic power dissipation 250kHz maximum switching speed Wide VDD operating range: 10V to 30V Use of P-Channel MOSFETs at output stage enables output voltage swing close to the supply rail (rail-to-rail output) 5000Vrms, 1 minute isolation Under voltage lockout protection (UVLO) with hysteresis - optimized for driving MOSFETs Minimum creepage distance of 8.0mm Minimum clearance distance of 10mm to 16mm (option TV or TSV) Minimum insulation thickness of 0.5mm UL and VDE* 1,414 peak working insulation voltage (VIORM) Plasma Display Panel High performance DC/DC convertor High performance switch mode power supply High performance uninterruptible power supply Isolated Power MOSFET gate drive Description The FOD3182 is a 3A Output Current, High Speed MOSFET Gate Drive Optocoupler. It consists of a aluminium gallium arsenide (AlGaAs) light emitting diode optically coupled to a CMOS detector with PMOS and NMOS output power transistors integrated circuit power stage. It is ideally suited for high frequency driving of power MOSFETS used in Plasma Display Panels (PDPs), motor control inverter applications and high performance DC/DC converters. The device is packaged in an 8-pin dual in-line housing compatible with 260C reflow processes for lead free solder compliance. *Requires `V' ordering option Functional Block Diagram Package Outlines NC 1 8 VDD ANODE 2 7 VO2 8 8 1 1 CATHODE 3 6 VO1 NC 4 5 VSS 8 Note: A 0.1F bypass capacitor must be connected between pins 5 and 8. (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 8 1 1 www.fairchildsemi.com FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler February 2011 LED VDD - VSS "Positive Going" (Turn-on) VDD - VSS "Negative Going" (Turn-off) VO Off 0V to 30V 0V to 30V Low On 0V to 7.4V 0V to 7V Low On 7.4V to 9V 7V to 8.5V Transition On 9V to 30V 8.5V to 30V High Pin Definitions Pin # Name Description 1 NC 2 Anode 3 Cathode 4 NC 5 VSS Negative Supply Voltage 6 VO2 Output Voltage 2 (internally connected to VO1) 7 VO1 Output Voltage 1 8 VDD Positive Supply Voltage (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 Not Connected LED Anode LED Cathode Not Connected www.fairchildsemi.com 2 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Truth Table As per DIN EN/IEC 60747-5-2. This optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.89 Table 1 For Rated Mains Voltage < 150Vrms I-IV For Rated Mains Voltage < 300Vrms I-IV For Rated Mains Voltage < 450Vrms I-III For Rated Mains Voltage < 600Vrms I-III For Rated Mains Voltage < 1000Vrms (Option T, TS) I-III Climatic Classification 40/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 CTI Comparative Tracking Index 175 VPR Input to Output Test Voltage, Method b, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec., Partial Discharge < 5pC 2651 Input to Output Test Voltage, Method a, VIORM x 1.5 = VPR, Type and Sample Test with tm = 60 sec.,Partial Discharge < 5 pC 2121 VIORM Max Working Insulation Voltage 1,414 Vpeak VIOTM Highest Allowable Over Voltage 6000 Vpeak External Creepage 8 mm External Clearance 7.4 mm 10.16 mm 0.5 mm Case Temperature 150 C Input Current 25 mA Output Power (Duty Factor 2.7%) 250 mW 109 External Clearance (for Option T or TS - 0.4" Lead Spacing) Insulation Thickness Safety Limit Values - Maximum Values Allowed in the Event of a Failure TCase IS,INPUT PS,OUTPUT RIO Insulation Resistance at TS, VIO = 500V (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 3 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Safety and Insulation Ratings Symbol Parameter Value Units TSTG Storage Temperature -40 to +125 C TOPR Operating Temperature -40 to +100 C Junction Temperature -40 to +125 C 260 for 10 sec. C TJ TSOL Lead Solder Temperature - Wave solder (Refer to Reflow Temperature Profile, pg. 22) IF(AVG) Average Input Current(1) 25 mA IF(tr, tf) LED Current Minimum Rate of Rise/Fall 250 ns VR Reverse Input Voltage 5 V IOH(PEAK) "High" Peak Output Current(2) 3 A IOL(PEAK) "Low" Peak Output Current(2) 3 A VDD - VSS Supply Voltage -0.5 to 35 V VO(PEAK) Output Voltage 0 to VDD V 250 mW 295 mW Dissipation(4) PO Output Power PD Total Power Dissipation(5) Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Value Units Power Supply 10 to 30 V IF(ON) Input Current (ON) 10 to 16 mA VF(OFF) Input Voltage (OFF) -3.0 to 0.8 V VDD - VSS Parameter (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 4 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Absolute Maximum Ratings (TA = 25C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Apply over all recommended conditions, typical value is measured at VDD = 30V, VSS = 0V, TA = 25C, unless otherwise specified. Symbol Parameter IOH High Level Output Current IOL Low Level Output Current VOH Test Conditions Min. Typ. VOH = (VDD - VSS - 1V) 0.5 0.9 A VOH = (VDD - VSS - 6V) 2.5 VOL = (VDD - VSS + 1V) 0.5 1 A VOL = (VDD - VSS + 6V) 2.5 High Level Output Voltage(5)(6) IO = -100mA Output Voltage(5)(6) IO = 100mA Max. VDD - 0.5 Unit V VOL Low Level VSS + 0.5 V IDDH High Level Supply Current Output Open, IF = 10 to 16mA 2.6 4.0 mA IDDL Low Level Supply Current Output Open, VF = -3.0 to 0.8V 2.5 4.0 mA IFLH Threshold Input Current Low to High IO = 0mA, VO > 5V 3.0 7.5 mA VFHL Threshold Input Voltage High to Low IO = 0mA, VO < 5V 0.8 1.1 V Input Forward Voltage IF = 10mA VF / TA Temperature Coefficient of Forward Voltage IF = 10mA VUVLO+ UVLO Threshold VO > 5V, IF = 10mA 7 8.3 9 V VO < 5V, IF = 10mA 6.5 7.7 8.5 V VF VUVLO- 0.6 BVR Input Reverse Breakdown Voltage IR = 10A CIN Input Capacitance f = 1MHz, VF = 0V 1.8 -1.5 UVLOHYST UVLO Hysteresis (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 1.43 5 V mV/C V V 25 pF www.fairchildsemi.com 5 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Electrical-Optical Characteristics (DC) Apply over all recommended conditions, typical value is measured at VDD = 30V, VSS = 0V, TA = 25C, unless otherwise specified. Symbol Parameter Test Conditions Min. tPLH Propagation Delay Time to High Output Level(7) tPHL Propagation Delay Time to Low Output Level(7) PWD Pulse Width Distortion(8) IF = 10mA, Rg = 10, f = 250kHz, Duty Cycle = 50%, Cg = 10nF Propagation Delay Difference Between Any PDD (tPHL - tPLH) Two Parts(9) tr Rise Time tf Fall Time tUVLO ON UVLO Turn On Delay tUVLO OFF UVLO Turn Off Delay Typ. Max. Unit 50 120 210 ns 50 145 210 ns 35 65 ns 90 ns -90 CL = 10nF, Rg = 10 | CMH | Output High Level Common Mode Transient Immunity(10) (11) TA = +25C, If = 7mA to 16mA, VCM = 2kV, VDD = 30V 35 | CML | Output Low Level Common Mode Transient Immunity(10) (12) TA = +25C, Vf = 0V, VCM = 2kV, VDD = 30V 35 38 ns 24 ns 2.0 s 0.3 s 50 kV/s 50 kV/s Isolation Characteristics Symbol Parameter Isolation Voltage(13) (14) Test Conditions VISO Withstand TA = 25C, R.H. < 50%, t = 1min., II-O 10A RI-O Resistance (input to output)(14) VI-O = 500V CI-O Capacitance (input to output) Freq. = 1MHz Min. Typ.* 5000 Max. Unit Vrms 1011 1 pF *Typical values at TA = 25C (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 6 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Switching Characteristics 6. 7. Maximum pulse width = 1ms, maximum duty cycle = 20%. tPHL propagation delay is measured from the 50% level on the falling edge of the input pulse to the 50% level of the falling edge of the VO signal. tPLH propagation delay is measured from the 50% level on the rising edge of the input pulse to the 50% level of the rising edge of the VO signal. 8. PWD is defined as | tPHL - tPLH | for any given device. The difference between tPHL and tPLH between any two FOD3182 parts under same operating conditions, with equal loads. 10. Pin 1 and 4 need to be connected to LED common. 11. Common mode transient immunity in the high state is the maximum tolerable dVCM/dt of the common mode pulse VCM to assure that the output will remain in the high state (i.e. VO > 15V). 8. 12. Common mode transient immunity in a low state is the maximum tolerable dVCM/dt of the common mode pulse, VCM, to assure that the output will remain in a low state (i.e. VO < 1.0V). 13. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage > 6000Vrms, 60Hz for 1 second (leakage detection current limit II-O < 10A). 14. Device considered a two-terminal device: pins on input side shorted together and pins on output side shorted together. (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 7 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Notes: 1. Derate linearly above +79C free air temperature at a rate of 0.37mA/C. 2. Maximum pulse width = 10s, maximum duty cycle = 11%. 3 Derate linearly above +79C, free air temperature at the rate of 5.73mW/C. 4. No derating required across operating temperature range. 5. In this test, VOH is measured with a dc load current of 100mA. When driving capacitive load VOH will approach VDD as IOH approaches zero amps. Fig. 2 Output High Voltage Drop vs. Ambient Temperature 0.5 (VOH - VDD) - HIGH OUTPUT VOLTAGE DROP (V) (VOH - VDD) - HIGH OUTPUT VOLTAGE DROP (V) Fig. 1 Output High Voltage Drop vs. Output High Current Frequency = 200Hz Duty Cycle = 0.1% IF = 10mA to 16mA VDD = 15V to 30V VSS = 0V 0 -0.5 -1.0 TA = -40C -1.5 -2.0 TA = 25C TA =100C -2.5 -3.-0 -3.5 0 0.5 1.0 1.5 2.0 2.5 0.00 -0.05 VDD = 15V to 30V VSS = 0V IF = 10mA to 16mA IO = -100mA -0.10 -0.15 -0.20 -0.25 -0.30 -40 -20 Fig. 3 Output High Current vs. Ambient Temperature 40 60 80 100 8 Frequency = 200Hz Duty Cycle = 0.2% IF = 10mA to 16mA VDD = 15V to 30V IOH - OUTPUT HIGH CURRENT (A) IOH - OUTPUT HIGH CURRENT (A) 20 Fig. 4 Output High Current vs. Ambient Temperature 8 6 VO = 6V 4 VO = 3V 2 0 -40 -20 0 20 40 60 80 Frequency = 100Hz Duty Cycle = 0.5% IF = 10mA to 16mA VDD = 15V to 30V 6 VO = 6V 4 VO = 3V 2 0 -40 100 -20 TA - AMBIENT TEMPERATURE (C) 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) Fig. 5 Output Low Voltage vs. Output Low Current Fig. 6 Output Low Voltage vs. Ambient Temperature 4 0.30 Frequency = 200Hz Duty Cycle = 99.9% VF(off) = 0.8V VDD = 15V to 30V VSS = 0V 3 VOL - OUTPUT LOW VOLTAGE (V) VOL - OUTPUT LOW VOLTAGE (V) 0 TA - AMBIENT TEMPERATURE (C) IOH - OUTPUT HIGH CURRENT (A) TA =100C TA = 25C 2 TA = -40C 1 0.5 1.0 1.5 2.0 2.5 IOL - OUTPUT LOW CURRENT (A) (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 0.20 0.15 0.10 0.05 0 -40 0 0 0.25 VDD = 15V to 30V VSS = 0V VF = -3V to 0.8V IO = 100mA -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) www.fairchildsemi.com 8 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Typical Performance Curves Fig. 7 Output Low Current vs. Ambient Temperature Fig. 8 Output Low Current vs. Ambient Temperature 8 Frequency = 200Hz Duty Cycle = 99.8% VF = 0.8V VDD = 15V to 30V IOL - OUTPUT LOW CURRENT (A) IOL - OUTPUT LOW CURRENT (A) 8 6 VO = 6V 4 VO = 3V 2 0 -40 -20 0 20 40 60 80 Frequency = 100Hz Duty Cycle = 99.5% VF = 0.8V VDD = 15V to 30V 6 VO = 6V 4 VO = 3V 2 0 -40 100 TA - AMBIENT TEMPERATURE (C) 0 40 60 80 100 Fig. 10 Supply Current vs. Supply Voltage Fig. 9 Supply Current vs. Ambient Temperature 3.6 IDD - SUPPLY CURRENT (mA) VDD = 15V to 30V VSS = 0V IF = 0mA (for IDDL) IF = 10mA (for IDDH) 3.4 3.2 IDDH(30V) 3.0 IDDL(30V) 2.8 IDDH(15V) 2.6 IF = 0mA (for IDDL) IF = 10mA (for IDDH) VSS = 0V TA = 25C 3.2 2.8 IDDH IDDL 2.4 IDDL(15V) 2.4 2.2 -40 2.0 -20 0 20 40 60 80 15 100 20 Fig. 11 Low-to-High Input Current Threshold vs. Ambient Temperature 30 Fig. 12 Propagation Delay vs. Supply Voltage 250 3.6 VDD = 15V to 30V VSS = 0V Output = Open tP - PROPAGATION DELAY (ns) 3.4 25 VDD - SUPPLY VOLTAGE (V) TA - AMBIENT TEMPERATURE (C) IFLH - LOW-to-HIGH INPUT CURRENT THRESHOLD (mA) 20 TA - AMBIENT TEMPERATURE (C) 3.6 IDD - SUPPLY CURRENT (mA) -20 3.2 3.0 2.8 2.6 IF = 10mA to 16mA TA = 25C RG = 10 CG = 10nF Duty Cycle = 50% Frequency = 250kHz 200 150 tPHL tPLH 100 2.4 2.2 -40 50 -20 0 20 40 60 80 15 100 (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 18 21 24 27 30 VDD - SUPPLY VOLTAGE (V) TA - AMBIENT TEMPERATURE (C) www.fairchildsemi.com 9 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Typical Performance Curves (Continued) Fig. 13 Propagation Delay vs. LED Forward Current Fig. 14 Propagation Delay vs. Ambient Temperature 450 VDD = 15V to 30V TA = 25C RG = 10 CG = 10nF Duty Cycle = 50% Frequency = 250kHz 200 tP - PROPAGATION DELAY (ns) tP - PROPAGATION DELAY (ns) 250 150 tPHL tPLH 100 IF = 10mA to 16mA VDD = 15V to 30V RG = 10 CG = 10nF Duty Cycle = 50% Frequency = 250kHz 350 250 tPHL 150 tPLH 50 6 8 10 12 14 50 -40 18 IF - FORWARD LED CURRENT (mA) 20 40 60 80 100 Fig. 16 Propagation Delay vs. Series Load Capacitance 450 450 IF = 10mA to 16mA VDD = 15V to 30V CG = 10nF Duty Cycle = 50% Frequency = 250kHz tP - PROPAGATION DELAY (ns) tP - PROPAGATION DELAY (ns) 0 TA - AMBIENT TEMPERATURE (C) Fig. 15 Propagation Delay vs. Series Load Resistance 350 250 tPHL 150 -20 IF = 10mA to 16mA VDD = 15V to 30V RG = 10 Duty Cycle = 50% Frequency = 250kHz 350 250 tPHL 150 tPLH tPLH 50 50 0 10 20 30 40 50 0 RG - SERIES LOAD RESISTANCE () 20 40 60 80 100 CG - SERIES LOAD CAPACITANCE (nF) Fig. 17 Transfer Characteristics Fig. 18 Input Forward Current vs. Forward Voltage 35 100 VDD = 30V TA = 25C IF - FORWARE CURRENT (mA) VO - OUTPUT VOLTAGE (V) 30 25 20 15 10 10 1 TA =100C 0.1 -40C 25C 0.01 5 0 0 1 2 3 4 0.001 0.6 5 IF - FORWARD LED CURRENT (mA) (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 0.8 1.0 1.2 1.4 1.6 1.8 VR - FORWARE VOLTAGE (V) www.fairchildsemi.com 10 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Typical Performance Curves (Continued) FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Typical Performance Curves (Continued) Fig. 19 Under Voltage Lockout 20 VO - OUTPUT VOLTAGE (V) 18 16 14 12 10 (8.30V) 8 6 4 2 (7.80) 0 0 5 10 15 20 (VDD - VSS) - SUPPLY VOLTAGE (V) (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 11 Power Supply + + C1 0.1F VDD = 10V to 30V C2 47F Pulse Generator PW = 4.99ms Period = 5ms ROUT = 50 1 8 2 7 3 6 Pulse-In Iol R2 100 D1 VOL LED-IFmon 4 Power Supply + + C3 0.1F V = 6V C4 47F 5 R1 100 To Scope Test Conditions: Frequency = 200Hz Duty Cycle = 99.8% VDD = 10V to 30V VSS = 0V VF(OFF) = -3.0V to 0.8V Figure 20. IOL Test Circuit Power Supply + + C1 0.1F VDD = 10V to 30V C2 47F Pulse Generator PW = 10s Period = 5ms ROUT = 50 1 8 2 7 Pulse-In + + C3 0.1F Ioh R2 100 3 6 4 5 Power Supply V = 6V - VOH LED-IFmon C4 47F D1 Current Probe To Scope R1 100 Test Conditions: Frequency = 200Hz Duty Cycle = 0.2% VDD = 10V to 30V VSS = 0V IF = 10mA to 16mA Figure 21. IOH Test Circuit (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 12 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Test Circuit 1 8 2 7 0.1F + - IF = 10 to 16mA VO 6 3 VDD = 10 to 30V 100mA 4 5 Figure 22. VOH Test Circuit 1 8 2 7 100mA + - 0.1F 3 6 4 5 VDD = 10 to 30V VO Figure 23. VOL Test Circuit (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 13 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Test Circuit (Continued) FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Test Circuit (Continued) 1 8 2 7 0.1F IF = 10 to 16mA 3 6 4 5 + - VDD = 30V + - VDD = 30V VO Figure 24. IDDH Test Circuit + - 1 8 2 7 0.1F VF = -0.3 to 0.8V 3 6 4 5 VO Figure 25. IDDL Test Circuit (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 14 IF 1 8 2 7 3 6 4 5 0.1F + - VDD = 10 to 30V + - VDD = 10 to 30V VO > 5V Figure 26. IFLH Test Circuit + - 1 8 2 7 0.1F VF = -0.3 to 0.8V 3 6 4 5 VO Figure 27. VFHL Test Circuit 1 8 2 7 0.1F + - IF = 10mA 3 6 4 5 VO = 5V 10V or 30V VDD Ramp Figure 28. UVLO Test Circuit (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 15 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Test Circuit (Continued) FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Test Circuit (Continued) 1 8 0.1F 2 + - Probe F = 250kHz DC = 50% 7 3 6 4 5 VO + - VDD = 10 to 30V Rg = 10 Cg = 10nF 50 IF tr tf 90% 50% VOUT 10% tPLH tPHL Figure 29. tPHL, tPLH, tr and tf Test Circuit and Waveforms IF 1 8 2 7 A 0.1F + - B 5V + - 3 6 4 5 VDD = 30V VO +- VCM = 2,000V VCM 0V t VO VOH Switch at A: IF = 10mA VO VOL Switch at B: IF = 0mA Figure 30. CMR Test Circuit and Waveforms (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 16 Part Number Package Packing Method FOD3182 DIP 8-Pin Tube (50 units per tube) FOD3182S SMT 8-Pin (Lead Bend) Tube (50 units per tube) FOD3182SD SMT 8-Pin (Lead Bend) Tape and Reel (1,000 units per reel) FOD3182V DIP 8-Pin, IEC60747-5-2 option Tube (50 units per tube) FOD3182SV SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-2 option Tube (50 units per tube) FOD3182SDV SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-2 option Tape and Reel (1,000 units per reel) FOD3182TV DIP 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-2 option Tube (50 units per tube) FOD3182TSV SMT 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-2 option Tube (50 units per tube) FOD3182TSR2 SMT 8-Pin, 0.4" Lead Spacing Tape and Reel (700 units per reel) FOD3182TSR2V SMT 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-2 option Tape and Reel (700 units per reel) Marking Information 1 3182 XX YY B V 3 2 6 5 4 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with DIN EN/IEC 60747-5-2 option - See order entry table) 4 Two digit year code, e.g., `11' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 www.fairchildsemi.com 17 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Ordering Information D0 P0 t K0 P2 E F A0 W1 d t P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 16.0 0.3 Tape Thickness 0.30 0.05 P0 Sprocket Hole Pitch 4.0 0.1 D0 Sprocket Hole Diameter 1.55 0.05 E Sprocket Hole Location 1.75 0.10 F Pocket Location 7.5 0.1 2.0 0.1 P2 P Pocket Pitch A0 Pocket Dimensions 12.0 0.1 10.30 0.20 B0 10.30 0.20 K0 4.90 0.20 W1 d R (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 Cover Tape Width 13.2 0.2 Cover Tape Thickness 0.1 max Max. Component Rotation or Tilt 10 Min. Bending Radius 30 www.fairchildsemi.com 18 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Carrier Tape Specifications - Option S D0 P0 t K0 P2 E F A0 W1 d P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 24.0 0.3 Tape Thickness 0.40 0.1 P0 Sprocket Hole Pitch 4.0 0.1 D0 Sprocket Hole Diameter 1.55 0.05 E Sprocket Hole Location 1.75 0.10 F Pocket Location 11.5 0.1 t 2.0 0.1 P2 P Pocket Pitch A0 Pocket Dimensions 16.0 0.1 12.80 0.1 B0 10.35 0.1 K0 5.7 0.1 W1 d R (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 Cover Tape Width 21.0 0.1 Cover Tape Thickness 0.1 max Max. Component Rotation or Tilt 10 Min. Bending Radius 30 www.fairchildsemi.com 19 FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Carrier Tape Specifications - Option TS FOD3182 -- 3A Output Current, High Speed MOSFET Gate Driver Optocoupler Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature (c)2010 Fairchild Semiconductor Corporation FOD3182 Rev. 1.0.9 8 minutes max. www.fairchildsemi.com 20 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com