(AI Packann Integrated Resistor Lamps 5 Volt and 12 Volt in T-1 and T-134 Packages Technical Data Features * Integral Current Limiting Resistor TTL Compatible Requires no External Current Limiter with 5 Volt/12 Volt Supply * Cost Effective Saves Space and Resistor Cost * Wide Viewing Angle Available in All Colors Red, High Efficiency Red, Yellow, and High Performance Green in T-1 and T-154 Packages Package Dimensions 39961251 2.67 ( 1051 | 3.43 1.1381 I 292 (9151 635 ( 250) S70 as) 5 $61 220 ed 1101651 ae oe 102 1.040) NOM 0451008) SQUARE NOMINAL -| j* 25440 1001 NOMINAL Figure A. T-1 Package. Description The 5 volt and 12 volt series lamps contain an integral cur- rent limiting resistor in series with the LED. This allows the lamp to be driven from a 5 volt/ 12 volt source without an external current limiter. The red LEDs are made from GaAsP on a GaAs substrate. The High Efficiency Red and Yellow devices use GaAsP on a GaP substrate. The green devices use GaP ona GaP substrate. The diffused lamps provide a wide off-axis viewing angle. 2] 5:98 4,200) | #67 (180) 89 (036) 64.025) 1.32 1.082) 1.02 (.040} 1 UT { aa. + gin atp!) &) 240) 4} 56 (220) Ng i caTHODE ~j| #254 1 100) NOM. Figure B. T-B/; Package. 3-159 HLMP-1100, HLMP-1120 HLMP-1600, HLMP-1601 HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641 HLMP-3105, HLMP-3112 HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651 HLMP-3680, HLMP-3681 wr oa pa wu =} a a a The T- 134 lamps are provided with sturdy leads suitable for wire wrap applications. The T-15/4 lamps may be front panel mounted by using the HLMP- 0103 clip and ring. a 9.19 1,362) 8.43 13321 ' NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETRES (INCHES). 2. AN EPOXY MENISCUS MAY EXTEND ABOUT Imm (.040"} DOWN THE LEADS: Selection Guide Part I, med Number Operating Package Color HLMP- Package Voltage | Min. | Typ. | 26,,!] | Outline Red 1100 T-1 Tinted Diffused 5 0.8 2.5 60 A 1120 T-1 Untinted Diffused 5 0.8 2.5 60 A 3105 T-15/4 Tinted Diffused 5 1.0 3.0 60 B 3112 12 1.0 3.0 60 B High 1600 T-1 Tinted Diffused 5 2.0 8.0 60 A Efficiency 1601 12 Red 3600 T-1/ Tinted Diffused 5 60 B 3601 12 Yellow 1620 T-1 Tinted Diffused 5 2.0 8.0 60 A 1621 12 3650 T-15/4 Tinted Diffused 5 60 B 3661 12 High 1640 T-1 Tinted Diffused 5 2.0 8.0 60 A Performance 1641 12 Green 3680 T-154 Tinted Diffused 5 60 B 3681 12 Note: 1. O12 is the off-axia angle at which the luminous intensity is 14 the axial luminous intensity. Absolute Maximum Ratings at T, = 25C Red/HER/ Red/HER/ Yellow Yellow Green Green 5 Volt Lamps | 12 Volt Lamps | 5 Volt Lamps | 12 Volt Lamps DC Forward Voltage (Ty, = 25C) 7.5 Voltal2l 15 Voltsls! 7.5 Volts!2) 15 Voitsl) Reverse Voltage (Ip = 100 1A) 5 Volts 5 Volts 5 Volts 5 Volts Operating Temperature Range -40C to 85C -40C to 85C -20C to 85C -20C to 85C Storage Temperature Range -55C to 100C | -55C to 100C -55C to 100C | -55C to 100C Lead Soldering Temperature 260C for 5 seconds Notes: 2. Derate from Ty = 50C at 0.071 V/C, see Figure 3. 3. Derate fram T, = 50C at 0.086 V/C, sce Figure 4. 3-160 Electrical/Optical Characteristics at T, = 25C High Red Efficiency Red Yellow Green Test Symbol} Description | Min.| Typ.|Max.| Min. | Typ. |Max.| Min.| Typ.| Max.| Min. | Typ.|Max.| Unit | Condition Ap Peak 655 635 583 565 nm Wavelength ha Dominant 648 626 585 569 nm |Note4 Wavelength Ad | Spectral Line 24 40 36 28 nm alfwidth R0j).pin | Thermal 290 290 290 290 C/W | Junction to Resistance Cathode Lead (Note 6) R6,.~n | Thermal 210 210 210 210 C/W | Junction to Resistance Cathode Lead Note 7) Ip Forward 13 20 13 20 13 20 13 20 mA |Vp=12V Current 12 V Devices Ip Forward 13 | 20 10 | 15 10] 15 12] 15 mA |Vp=5V Current 5 V Devices TW Luminous 65 145 500 595 lumen | Note 2 Efficacy Watt Va Reverse 5.0 5.0 5.0 5.0 V|Igp= 100 pA Breakdown Voltage Notes: 4. The dominant wavelength, Aq, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 6. Radiant intengity, I, in watts/steradian, may be found from the equation I, = lwny, where ly is the luminous intensity in candelas and ny is the luminous efficacy in lumens/Watt. 6. For Figure A package type. 7. For Figure B package type. 3-161 a) ws 5 fad a YS aa aon io) a 24 / 20 po ig FORWARD CURRENT ~ mA 4 j . - 0 2 4 6 (8 10 120 14 | 16 16 75 APPLIED FORWARD VOLTAGE V Vec Figure 1. Forward Current vs. Applied Forward Voltage. 5 Volt Devices. ~ no Vec APPLIED FORWARD VOLTAGE V 0 20 40 60 80 86 Ta - AMBIENT TEMPERATURE C Figure 3. Maximum Allowed Applied Forward Voltage va. Ambient Temperature R6,, = 175C/W. 6 Volt Devices. 24 > w 5 s u > > = ft ft a a | A z an ee pe ~~ ot ne GaAsP oT el AL 1 ar 08}- _Hidh EFFICIENCY | HIGH EFFICIENCY i |_RED, YELLOW, | AED, YELLOW, GREEN /p GREEN 0 { | o ( 1 1 | 1 L 1 0 2 4 6 a 10 0 2 4 6 8 10 12 14 16 18 20 5 VOLT DEVICE 12 VOLT DEVICES Figure 6. Relative Luminous Intensity vs. Applied Figure 7. Relative Luminous Intensity vs. Applied Forward Voltage. 5 Volt Devices. Forward Voltage. 12 Volt Devices. 3-163