●High ripple capability
●For train systems and high power consuming inverter circuits
●Endurance with ripple current : 20,000 hours at 85℃
●RoHS Compliant
RWL
S
e
r
i
e
s
◆SPECIFICATIONS
(at 20℃, 120Hz)
(at 20℃ after 5 minutes)
(at 20℃, 120Hz)
(at 120Hz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tan
δ)
Low Temperature
Characteristics
Insulation Resistance
Insulation
Withstanding Voltage
Endurance
Shelf Life
Items
-
25 to +85℃
350 to 450Vdc
±20% (M)
I=0.02CV or 5mA, whichever is smaller.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
0.25 max.
Capacitance change C(
-
25℃)/C(+20℃)≧0.7
When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering
the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MΩ.
When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp
on the insulating sleeve covering the case, there shall not be electrical damage.
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 20,000 hours at 85℃.
Capacitance change ≦± 30% of the initial value
D.F. (tanδ)≦300% of the initial specified value
Leakage current ≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 85℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦± 20% of the initial value
D.F. (tanδ)≦300% of the initial specified value
Leakage current ≦The initial specified value
Characteristics
◆PART NUMBERING SYSTEM
φ63.5 : G=6
φ76.2 & φ89 : G=5
◆DIMENSIONS (Screw-Mount) [mm]
●Mounting Clamp Code : B
L+4max. G±1
φD+1.8max.
F±1
Sleeve (Pb-free PVC : Black)
Plastic disk
6
A±1
W±1
4.5
B±1
30°±5°
360°
3
45°±5°
8
J
K±1
E±1
4.5
●Mounting Clamp Code : C
φD
63.5
76.2
A
90.0
104.5
B
76.0
90.0
W
80.0
93.5
F
28.0
31.5
φD
63.5
76.2
89
E
38.1
44.5
50.8
K
43.5
50.0
56.5
F
28.0
31.5
31.5
J
14.0
14.0
16.0
Longer life
RWL
RWF
●Terminal Code : LG
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6,800µF:682, 12,000µF:123)
Mounting clamp code (N, B, C)
Terminal code
Voltage code (ex. 350V:351, 400V:401)
Series code
Category
E R
W
LA A A L G N A A A A A A MM
13426789101312518171611 1514
Please refer to "Product code guide (screw-mount terminal type)"
Vent
<Screw specifcations>
Plus hexagon-headed screw :M5×0.8×10
Maximum screw tightening torque :3.23Nm
* The screw and the mounting clamp are separately supplied and not attached to the product.
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Inverter-use screw terminal, 85
℃
(1/2) CAT. No. E1001M
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.
RWL
S
e
r
i
e
s
◆STANDARD RATINGS
◆RATED RIPPLE CURRENT MULTIPLIERS
●Frequency Multipliers
Frequency (Hz)
Coefficient
50
0.8
120
1.0
300
1.1
1k
1.3
3k
1.4
Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to
10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for RWL series capacitors,
using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of
Nippon Chemi-Con.
WV
(Vdc)
Cap
(µF) (µF)
Case size
φ
D×L(mm)
φ
D×L(mm)
tan
δ
tan
δ
Rated ripple
current
(Arms/
85
℃
,120Hz) 85
℃
,120Hz)
Part No.
350
3,300 63.5×115 0.25 11.1 ERWL351LGC332MDB5M
3,900 63.5×130 0.25 12.8 ERWL351LGC392MDD0M
4,700 63.5×155 0.25 15.2 ERWL351LGC472MDF5M
4,700 76.2×115 0.25 14.7 ERWL351LGC472MEB5M
5,600 63.5×170 0.25 17.3 ERWL351LGC562MDH0M
5,600 76.2×130 0.25 16.9 ERWL351LGC562MED0M
6,800 63.5×190 0.25 20.0 ERWL351LGC682MDK0M
6,800 76.2×155 0.25 20.2 ERWL351LGC682MEF5M
8,200 76.2×170 0.25 23.1 ERWL351LGC822MEH0M
10,000 89×155 0.25 26.6 ERWL351LGC103MFF5M
12,000 89×190 0.25 32.0 ERWL351LGC123MFK0M
400
2,700 63.5×115 0.25 10.1 ERWL401LGC272MDB5M
3,300 63.5×130 0.25 11.7 ERWL401LGC332MDD0M
3,900 63.5×155 0.25 13.8 ERWL401LGC392MDF5M
3,900 76.2×115 0.25 14.7 ERWL401LGC392MEB5M
4,700 63.5×170 0.25 15.8 ERWL401LGC472MDH0M
4,700 76.2×130 0.25 15.5 ERWL401LGC472MED0M
WV
(Vdc)
Cap Case size
Rated ripple
current
(Arms/
Part No.
400
5,600 63.5×190 0.25 18.2 ERWL401LGC562MDK0M
5,600 76.2×155 0.25 18.3 ERWL401LGC562MEF5M
6,800 76.2×170 0.25 21.0 ERWL401LGC682MEH0M
8,200 89×155 0.25 24.1 ERWL401LGC822MFF5M
10,000 89×190 0.25 29.1 ERWL401LGC103MFK0M
450
2,200 63.5×115 0.25 9.10 ERWL451LGC222MDB5M
2,700 63.5×130 0.25 10.6 ERWL451LGC272MDD0M
2,700 76.2×115 0.25 11.2 ERWL451LGC272MEB5M
3,300 63.5×155 0.25 12.7 ERWL451LGC332MDF5M
3,300 76.2×130 0.25 13.0 ERWL451LGC332MED0M
3,900 63.5×170 0.25 14.4 ERWL451LGC392MDH0M
4,700 76.2×155 0.25 16.7 ERWL451LGC472MEF5M
5,600 76.2×190 0.25 20.1 ERWL451LGC562MEK0M
5,600 89×155 0.25 19.9 ERWL451LGC562MFF5M
6,800 89×170 0.25 23.0 ERWL451LGC682MFH0M
8,200 89×190 0.25 26.4 ERWL451LGC822MFK0M
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Inverter-use screw terminal, 85℃
(2/2) CAT. No. E1001M
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.