SPEC NO: DSAB0049 REV NO: V.15B DATE: FEB/07/2012 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001054
3.2x2.4mm SMD CHIP LED LAMP
Part Number: KPD-3224CGCK Green
Features
z3.2x2.4mm SMT LED, 2.4mm thickness.
zLow power consumption.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 1500pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB0049 REV NO: V.15B DATE: FEB/07/2012 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001054
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
KPD-3224CGCK Green (AlGaInP) Water Clear 400 600 20°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 574 nm IF=20mA
λD [1] Dominant Wavelength Green 570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 20 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA
IR Reverse Current Green 10 uA VR=5V
Parameter Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAB0049 REV NO: V.15B DATE: FEB/07/2012 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001054
Green KPD-3224CGCK
SPEC NO: DSAB0049 REV NO: V.15B DATE: FEB/07/2012 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001054
KPD-3224CGCK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAB0049 REV NO: V.15B DATE: FEB/07/2012 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203001054
PACKING & LABEL SPECIFICATIONS KPD-3224CGCK
