3.2x2.4mm SMD CHIP LED LAMP Part Number: KPD-3224CGCK Green Features Description z 3.2x2.4mm SMT LED, 2.4mm thickness. The Green source color devices are made with AlGaInP on z Low power consumption. GaAs substrate Light Emitting Diode. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 1500pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAB0049 REV NO: V.15B APPROVED: WYNEC CHECKED: Allen Liu DATE: FEB/07/2012 DRAWN: D.M.Su PAGE: 1 OF 5 ERP: 1203001054 Selection Guide Part No. Dice KPD-3224CGCK Green (AlGaInP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 21/2 400 600 20 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB0049 REV NO: V.15B APPROVED: WYNEC CHECKED: Allen Liu DATE: FEB/07/2012 DRAWN: D.M.Su PAGE: 2 OF 5 ERP: 1203001054 Green KPD-3224CGCK SPEC NO: DSAB0049 REV NO: V.15B APPROVED: WYNEC CHECKED: Allen Liu DATE: FEB/07/2012 DRAWN: D.M.Su PAGE: 3 OF 5 ERP: 1203001054 KPD-3224CGCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAB0049 REV NO: V.15B APPROVED: WYNEC CHECKED: Allen Liu DATE: FEB/07/2012 DRAWN: D.M.Su PAGE: 4 OF 5 ERP: 1203001054 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAB0049 REV NO: V.15B APPROVED: WYNEC CHECKED: Allen Liu KPD-3224CGCK DATE: FEB/07/2012 DRAWN: D.M.Su PAGE: 5 OF 5 ERP: 1203001054