TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUAR Y 2003
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Power-On Reset Generator
D
Automatic Reset Generation After
Voltage Drop
D
Precision Voltage Sensor
D
Temperature-Compensated Voltage
Reference
D
Programmable Delay Time by External
Capacitor
D
Supply Voltage Range ...2 V to 6 V
D
Defined RESET Output from VDD ≥1 V
D
Power-Down Control Support for Static
RAM With Battery Backup
D
Maximum Supply Current of 16 µA
D
Power Saving Totem-Pole Outputs
D
Temperature Range . . . Up to –55°C to
125°C
description
The TLC77xx family of micropower supply voltage
supervisors provide reset control, primarily in
microcomputer and microprocessor systems.
During power-on, RESET is asserted when VDD
reaches 1 V. After minimum VDD (≥2 V) is
established, the circuit monitors SENSE voltage
and keeps the reset outputs active as long as
SENSE voltage (VI(SENSE)) remains below the
threshold voltage. An internal timer delays return
of the output to the inactive state to ensure proper
system reset. The delay time, td, is determined by
an external capacitor:
td = 2.1 × 104 × CT
Where
CT is in farads
td is in seconds
Except for the TLC7701, which can be customized with two external resistors, each supervisor has a fixed
SENSE threshold voltage set by an internal voltage divider. When SENSE voltage drops below the threshold
voltage, the outputs become active and stay in that state until SENSE voltage returns above threshold voltage
and the delay time, td, has expired.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 1994 – 2003, Texas Instruments Incorporated
1
2
3
4
8
7
6
5
CONTROL
RESIN
CT
GND
VDD
SENSE
RESET
RESET
D, JG, P OR PW PACKAGE
(TOP VIEW)
3212019
910111213
4
5
6
7
8
18
17
16
15
14
NC
SENSE
NC
RESET
NC
NC
RESIN
NC
CT
NC
NC
CONTROL
NC
RESET
NC NC
NC
NC VDD
FK PACKAGE
(TOP VIEW)
GND
1
2
3
4
5
10
9
8
7
6
NC
CONTROL
RESIN
CT
GND
NC
VDD
SENSE
RESET
RESET
U PACKAGE
(TOP VIEW)
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
description (continued)
In addition to the power-on-reset and undervoltage-supervisor function, the TLC77xx adds power-down control
support for static RAM. When CONTROL is tied to GND, RESET will act as active high. The voltage monitor
contains additional logic intended for control of static memories with battery backup during power failure. By
driving the chip select (CS) of the memory circuit with the RESET output of the TLC77xx and with the CONTROL
driven by the memory bank select signal (CSH1 ) of the microprocessor (see Figure 10), the memory circuit is
automatically disabled during a power loss. (In this application the TLC77xx power has to be supplied by the
battery.)
The TLC77xxI is characterized for operation over a temperature range of –40°C to 85°C; the TLC77xxQ is
characterized for operation over a temperature range of –40°C to 125°C; and the TLC77xxM is characterized
for operation over the full Military temperature range of –55°C to 125°C.
AVAILABLE OPTIONS
PACKAGED DEVICES
TATHRESHOLD
VOLTAGE
(V) SMALL
OUTLINE (D)†CHIP
CARRIER (FK) CERAMIC DIP
(JG)
CERAMIC
DUAL
FLATPACK
(U)
PLASTIC DIP
(P)
THIN SHRINK
SMALL
OUTLINE
(PW)‡
1.1 TLC7701ID ———TLC7701IP TLC7701IPW
–
40
°
C
2.25 TLC7725ID ———TLC7725IP TLC7725IPW
40 C
to 2.63 TLC7703ID ———TLC7703IP TLC7703IPW
85°C2.93 TLC7733ID ———TLC7733IP TLC7733IPW
4.55 TLC7705ID ———TLC7705IP TLC7705IPW
1.1 TLC7701QD ———TLC7701QP TLC7701QPW
–
40
°
C
2.25 TLC7725QD ———TLC7725QP TLC7725QPW
40 C
to 2.63 TLC7703QD ———TLC7703QP TLC7703QPW
125°C2.93 TLC7733QD ———TLC7733QP TLC7733QPW
4.55 TLC7705QD ———TLC7705QP TLC7705QPW
–55°C
to
2.93 —TLC7733MFK TLC7733MJG — — —
to
125°C4.55 —TLC7705MFK TLC7705MJG TLC7705MU — —
†The D package is available taped and reeled. Add the suffix R to the device type when ordering (e.g., TLC7705QDR).
‡The PW package is only available left-end taped and reeled (indicated by the LE suffix on the device type; e.g., TLC7705QPWLE).
FUNCTION TABLE
CONTROL RESIN VI(SENSE)>VIT+ RESET RESET
L L False H L
L L True H L
L H False H L
L H True L§H§
H L False H L
H L True H L
H H False H L
H H True H H§
§RESET and RESET states shown are valid for t > td.
logic symbol¶
¶This symbol is in accordance with ANSI/IEEE Std 91–1984 and
IEC Publication 617-12.
6
1
3
2
7
SENSE
≥1
≥1
≥1RESET
5
COMP
SVITS<VIT Z1
Z2
Z3
RESIN
CT
CONTROL RESET
3
2
1
1
CX
×
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
functional block diagram
1.1 V
R2‡
R1‡
RESET†
RESET†
VDD
GND
8
6
5
4
RESIN
CONTROL
SENSE
CT
3
1
2
7
1 MΩ
50 µA
†Outputs are totem-pole configuration. External pullup or pulldown resistors are not required.
‡Nominal values:
TLC7701
TLC7703
R1 (Typ) R2 (Typ)
TLC7733
TLC7705
750 k
910 k 290 k
450 kΩ
Ω
Ω
Ω
0∞
502 kΩ698 kΩ
TLC7725 600 k 600 k
ΩΩ
timing diagram
RESET
Output
Output
Undefined
VDD and VI(SENSE)
td
Threshold Voltages
Vres
VIT–
VIT+
ÎÎ
ÎÎ
td
t
t
VIT+
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature (unless otherwise noted)†
Supply voltage, VDD (see Note 1) 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, CONTROL, RESIN, SENSE (see Note 1) –0.3 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum low output current, IOL 10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum high output current, IOH –10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VI < 0 or VI > VDD) ±10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0 or VO > VDD) ±10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, TA: TL77xxI –40°C to 85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL77xxQ –40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL77xxM –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only , and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may af fect device reliability.
NOTE 1: All voltage values are with respect to GND.
DISSIPATION RATING TABLE
PACKAGE TA ≤ 25°C
POWER RATING DERATING FACTOR
ABOVE TA = 25°CTA = 85°C
POWER RATING TA = 125°C
POWER RATING
D725 mW 5.8 mW/°C377 mW 145 mW
FK 1375 mW 11.0 mW/°C 715 mW 275 mW
JG 1050 mW 8.4 mW/°C 546 mW 210 mW
P1000 mW 8.0 mW/°C 520 mW 200 mW
PW 525 mW 4.2 mW/°C 273 mW 105 mW
U700 mW 5.5 mW/°C370 mW 150 mW
recommended operating conditions at specified temperature range
MIN MAX UNIT
Supply voltage, VDD 2 6 V
Input voltage, VI0 VDD V
High-level input voltage at RESIN and CONTROL‡, VIH 0.7×VDD V
Low-level input voltage at RESIN and CONTROL‡, VIL 0.2×VDD V
High-level output current, IOH
VDD ≥27V
–2 mA
Low-level output current, IOL
V
DD
≥2
.
7
V
2 mA
Input transition rise and fall rate at RESIN and CONTROL, ∆t/∆V 100 ns/V
O
p
erating free air tem
p
erature range TA
TLC77xxI –40 85
°C
Operating
free
-
air
temperature
range
,
T
ATLC77xxQ –40 125
°C
Operating free-air temperature range, TATLC77xxM –55 125 °C
‡To ensure a low supply current, VIL should be kept <0.3 V and VIH > VDD –0.3 V.
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics over recommended operating conditions (see Note 2) (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
TLC77xx
UNIT
PARAMETER
TEST
CONDITIONS
MIN TYP†MAX
UNIT
VDD = 2 V 1.8
VOH
High level out
p
ut voltage
IOH = –20 µAVDD = 2.7 V 2.5
V
V
OH
High
-
level
output
voltage
VDD = 4.5 V 4.3
V
IOH = –2 mA VDD = 4.5 V 3.7
VDD = 2 V 0.2
VOL
Low level out
p
ut voltage
IOL = 20 µAVDD = 2.7 V 0.2
V
V
OL
Low
-
level
output
voltage
VDD = 4.5 V 0.2
V
IOL = 2 mA VDD = 4.5 V 0.5
TLC7701 1.04 1.1 1.16
Nti iitthhldlt
TLC7725 2.18 2.25 2.32
VIT–Negative-going input threshold voltage,
SENSE (see Note 3)
TLC7703 VDD = 2 V to 6 V 2.56 2.63 2.70 V
SENSE
(see
Note
3)
TLC7733 2.86 2.93 3
TLC7705 4.47 4.55 4.63
TLC7701 VDD = 2 V to 6 V 30 mV
TLC7725
Vh
y
sHysteresis voltage, SENSE TLC7703,
VDD =2Vto6V
70
mV
y
TLC7733,
V
DD =
2
V
to
6
V
70
mV
TLC7705
Vres Power-up reset voltage‡IOL = 20 µA 1 V
RESIN VI = 0 V to VDD 2
II
In
p
ut current
CONTROL VI = VDD 7 15
µA
II
Input
current
SENSE VI = 5 V 5 10
µA
SENSE, TLC7701 only VI = 5 V 2
RESIN = V
DD,
IDD Supply current
RESIN
VDD,
SENSE = VDD ≥ VITmax + 0.2 V 916µA
CONTROL = 0 V, Outputs open
IDD(d) Supply current during td
VDD = 5 V,
RESIN = VDD,
CONTROL = 0 V,
VCT = 0 ,
SENSE = VDD,
Outputs open 120 150 µA
CIInput capacitance, SENSE VI = 0 V to VDD 50 pF
†Typical values apply at TA = 25°C.
‡The lowest supply voltage at which RESET becomes active. The symbol Vres is not currently listed within EIA or JEDEC standards for
semiconductor symbology. Rise time of VDD ≥ 15 µs/V.
NOTES: 2. All characteristics are measured with CT = 0.1 µF.
3. T o ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 µF) should be connected near the supply terminals.
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics over recommended operating conditions (see Note 2) (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
TLC77xxM
UNIT
PARAMETER
TEST
CONDITIONS
MIN TYP†MAX
UNIT
VDD =2V
TA = 25°C 1.8
V
DD =
2
V
,TA = –55°C to 125°C 1.7
IOH = 20 µA
VDD =27V
TA = 25°C 2.5
VOH
Hi
g
h-level output
I
OH = –
20
µ
A
V
DD =
2
.
7
V
TA = –55°C to 125°C 2.3
V
V
OH
g
voltage
VDD =45V
TA = 25°C 4.3
V
V
DD =
4
.
5
V
TA = –55°C to 125°C 4.2
IOH =2mA
VDD =45V
TA = 25°C 3.7
I
OH = –
2
mA
V
DD =
4
.
5
V
TA = –55°C to 125°C 3.6
VDD =2V
TA = 25°C 0.2
V
DD =
2
V
TA = –55°C to 125°C 0.2
IOL =20µA
VDD =27V
TA = 25°C 0.2
VOL
Low-level output
I
OL =
20
µ
A
V
DD =
2
.
7
V
TA = –55°C to 125°C 0.2
V
V
OL voltage
VDD =45V
TA = 25°C 0.2
V
V
DD =
4
.
5
V
TA = –55°C to 125°C 0.2
IOL =2mA
VDD =45V
TA = 25°C 0.5
I
OL =
2
mA
V
DD =
4
.
5
V
TA = –55°C to 125°C 0.5
VIT
Ne
g
ative-
g
oin
g
input threshold TLC7733
VDD =2Vto6V
2.86 2.93 3.1
V
V
IT–
ggg
voltage, SENSE (see Note 3) TLC7705
V
DD =
2
V
to
6
V
4.3 4.5 4.8
V
Vhys Hysteresis voltage, SENSE VDD = 2 V to 6 V VDD = 2 V to 6 V 70 mV
Vres Power-up reset voltage‡IOL = 20 µA 1 V
RESIN VI = 0 V to VDD 2
II
In
p
ut current
CONTROL VI = VDD 7 15
µA
II
Input
current
SENSE VI = 5 V 5 10
µA
SENSE, TLC7701 only VI = 5 V 2
RESIN = V
DD
,
IDD Supply current
DD,
SENSE = VDD ≥ VITmax + 0.2 V
CONTROL 0 V O
916µA
CONTROL = 0 V, Outputs open
IDD(d)
Su
pp
ly current during td
TLC7733 VCT = 0 ,
RESIN = VDD,
CONTROL=0V
VDD = 3.3 V 250
µA
I
DD(d)
Supply
current
during
t
dTLC7705
CONTROL
=
0
V
,
SENSE = VDD,
Outputs open VDD = 5 V 120 150
µ
A
CIInput capacitance, SENSE VI = 0 V to VDD 50 pF
†Typical values apply at TA = 25°C.
‡The lowest supply voltage at which RESET becomes active. The symbol Vres is not currently listed within EIA or JEDEC standards for
semiconductor symbology. Rise time of VDD ≥ 15 µs/V.
NOTES: 2. All characteristics are measured with CT = 0.1 µF.
3. To ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 µF) should be placed near the supply terminals.
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
switching characteristics at VDD = 5 V, RL = 2 kΩ, CL = 50 pF, TA = 25°C (unless otherwise noted)
MEASURED TLC77xx
PARAMETER FROM
(INPUT) TO
(OUTPUT) TEST CONDITIONS MIN TYP MAX UNIT
tdDelay time VI(SENSE) ≥ VIT+
RESET
and
RESET
RESIN = 0.7 × VDD,
CONTROL = 0.2 × VDD,
CT = 100 nF,
TA = Full range,
See timing diagram
1.1 2.1 4.2 ms
tPLH Propagation delay time,
low-to-high-level output
RESET
VIH =V
IT max+02V
20
tPHL Propagation delay time,
high-to-low-level output
SENSE
RESET
V
IH =
V
IT+
max
+
0
.
2
V
,
VIL = VIT–min – 0.2 V,
RESIN =07×VDD
5
µs
tPLH Propagation delay time,
low-to-high-level output
SENSE
RESET
RESIN
=
0
.
7
×
V
DD,
CONTROL = 0.2 × VDD,
CT=NC
†
5µ
s
tPHL Propagation delay time,
high-to-low-level output
RESET
CT
=
NC†
20
tPLH Propagation delay time,
low-to-high-level output
RESET
VIH =07×VDD
20 µs
tPHL Propagation delay time,
high-to-low-level output
RESIN
RESET
V
IH =
0
.
7
×
V
DD,
VIL = 0.2 × VDD,
SENSE = VIT max+02V
40
ns
tPLH Propagation delay time,
low-to-high-level output
RESIN
RESET
SENSE
=
V
IT+
max
+
0
.
2
V
,
CONTROL = 0.2 × VDD,
CT=NC
†
45
ns
tPHL Propagation delay time,
high-to-low-level output
RESET
CT
=
NC†
20 µs
tPLH Propagation delay time,
low-to-high-level output
CONTROL
RESET
VIH = 0.7 × VDD,
VIL = 0.2 × VDD,
SENSE = VIT max+02V
38 ns
tPHL Propagation delay time,
high-to-low-level output
CONTROL
RESET
SENSE
=
V
IT+
max
+
0
.
2
V
,
RESIN = 0.7 × VDD,
CT = NC†38 ns
Low-level minimum pulse
duration to switch RESET
SENSE VIH = VIT+max + 0.2 V,
VIL = VIT–min – 0.2 V, 3
µs
duration
to
switch
RESET
and RESET RESIN VIL = 0.2 × VDD,
VIH = 0.7 × VDD 1µ
s
trRise time RESET
and
10% to 90% 8
ns/V
tfFall time an
d
RESET 90% to 10% 4
ns/V
†NC = No capacitor , and includes up to 100-pF probe and jig capacitance.
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
8POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
switching characteristics at VDD = 5 V, RL = 2 kΩ, CL = 50 pF
MEASURED TLC77xxM
PARAMETER FROM
(INPUT) TO
(OUTPUT) TEST CONDITIONS TAMIN TYP MAX UNIT
tdDelay time VI(SENSE) ≥ VIT+ RESET
and
RESET
RESIN = 2.7 V,
CONTROL = 0.4 V,
CT = 100 nF,
See timing diagram
Full
range 1.1 2.1 4.2 ms
25°C20
tPLH
Propagation delay
time low-to-high-level
SENSE
RESET VIH = VIT+max + 0.2 V,
VIL = VIT–min – 0.2 V,
RESIN =27V
Full
range 24 µs
t
PLH
time
,
low
-
to
-
high
-
level
output
SENSE
RESIN
=
2
.
7
V
,
CONTROL = 0.4 V
,
25°C 5
out ut
RESET
CONTROL
0.4
V,
CT = NC†Full
range 7µs
25°C5
tPHL
Propagation delay
time high-to-low-level
SENSE
RESET VIH = VIT+max + 0.2 V,
VIL = VIT–min – 0.2 V,
RESIN =27V
Full
range 7µs
t
PHL
time
,
high
-
to
-
low
-
level
output
SENSE
RESIN
=
2
.
7
V
,
CONTROL = 0.4 V
,
25°C 20
out ut
RESET
CONTROL
0.4
V,
CT = NC†Full
range 24 µs
25°C20
tPLH
Propagation delay
time low-to-high-level
RESIN
RESET VIH = 2.7 V,
VIL = 0.4 V,
SENSE = VIT max+02V
Full
range 24 µs
t
PLH
time
,
low
-
to
-
high
-
level
output
RESIN
SENSE
=
V
IT+
max
+
0
.
2
V
,
CONTROL = 0.4 V
,
25°C 45
out ut
RESET
CONTROL
0.4
V,
CT = NC†Full
range 65 ns
25°C40
tPHL
Propagation delay
time high-to-low-level
RESIN
RESET VIH = 2.7 V,
VIL = 0.4 V,
SENSE = VIT max+02V
Full
range 60 ns
t
PHL
time
,
high
-
to
-
low
-
level
output
RESIN
SENSE
=
V
IT+
max
+
0
.
2
V
,
CONTROL = 0.4 V
,
25°C 20
out ut
RESET
CONTROL
0.4
V,
CT = NC†Full
range 24 µs
Propa
g
ation dela
y
25°C 38
tPLH
gy
time, low-to-high-level
output
CONTROL
RESET
VIH = 2.7 V,
VIL = 0.4 V,
SENSE = VIT max+02V
Full
range 58 ns
Propa
g
ation delay
CONTROL
RESET
SENSE
=
V
IT+
max
+
0
.
2
V
,
RESIN = 2.7 V
,
25°C 38
tPHL
gy
time, high-to-low-level
output
RESIN
2.7
V,
CT = NC†Full
range 58 ns
Low-level minimum SENSE VIH = VIT+max + 0.2 V,
VIL = VIT–min – 0.2 V, Full 3
µs
pulse duration RESIN VIL = 0.4 V,
VIH = 2.7 V range 1µ
s
trRise time RESET
and
10% to 90% Full 8
ns/V
tfFall time
and
RESET 90% to 10% range 4
ns/V
†NC = No capacitor , and includes up to 100-pF probe and jig capacitance.
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
DUT
RL
(see Note A) CL
(see Note B)
5 V
NOTES: A. For switching characteristics, RL = 2 kΩ.
B. CL = 50 pF includes jig and probe capacitance.
Figure 1. RESET AND RESET Output Configurations
VIT–
tw(L) tw(L)
VIT+max + 200 mV2.7 V VIT+
VIT–min – 200 mV
(a) RESIN (b) SENSE
0.4 V
1.5 V
tw(L)
0.7 × VDD
0.2 × VDD
0.5 × VDD
M suffixed devices
I, Q, and Y suffixed devices
Figure 2. Input Pulse Definition Waveforms
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 3
Normalized Input Threshold Voltage –
1.005
–40
1.004
1.003
1.002
1.001
1
0.999
0.998
0.997 –20 0 20 40 60 80 100 120
TA – Temperature – °C
VIT–(TA)/VIT–(25 C)
°
NORMALIZED INPUT THRESHOLD VOLTAGE
vs
TEMPERATURE
Figure 4
10
–0.5
9
8
7
6
5
4
3
2
0.5 1.5 2.5 3.5 4.5 5.5 6.5
VDD – Supply Voltage – V
1
0
–1
RESIN = VDD = –1 V to 6.5 V
SENSE = GND
CONTROL = GND
CT = Open = 100 pF
TA = 25°C
– Supply Current –AµIDD
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
Figure 5
4.5
5
4
3.5
3
2.5
2
1.5
1
0.5
0–5–10 –15 –20 –25 –40
IOH – High-Level Output Current – mA
0
–0.5
–1
VDD = 4.5 V
RESIN = 4.5 V
SENSE = 0.5 V
CONTROL = 0 V
CT = Open = 100 pF
– High-Level Output Voltage – VVOH
5
125°C
85°C
25°C
–40°C
–55°C
0°C
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
–30 –35
Figure 6
–5
6
5
4
3
2
0 5 10 15 20 25 30
IOL – Low-Level Output Current – mA
1
0
–1
VDD = 4.5 V
RESIN = 4.5 V
SENSE = 5 V
CONTROL = 0 V
CT = Open = 100 pF
– Low-Level Output Voltage – VVOL
–40°C
–55°C
125°C
85°C
25°C
0°C
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 7
–1
4
2
0
–2
–4
0123456
VI – Input Voltage at SENSE – V
–6
–8
–10
–55°C
125°C
VDD = 4.5 V
CT = Open = 100 pF
8
6
– Input Current –AµII
–55°C
125°C
INPUT CURRENT
vs
INPUT VOLTAGE AT SENSE
Figure 8
0
7
6
5
4
3
50 100 150 200
Sense Threshold Overdrive – mV
2
1
0
– Minimum Pulse Duration at SENSE –sµtw
MINIMUM PULSE DURATION AT SENSE
vs
SENSE THRESHOLD OVERDRIVE
250 300 350 400
VDD = 2 V
Control = 0.4 V
RESIN = 1.4 V
CT = Open = 100 pF
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
APPLICATION INFORMATION
TLC77xx
GND
0.1 µF
RESETRESIN
RESETSENSE
CONTROLCT
GND
RESET
VDD
TMS70C20
NC
100 kΩ
RESET
VDD
VDD
0.1 µF
Figure 9. Reset Controller in a Microcomputer System
VDD
GND
RESET
SENSE
CONTROL CT
RESET
GND
CS
VDD
TLC77xx
RESET
CSH1
ADD0–15
GND R/W
16
8A0–A15
D0–D7DATA0–7
R/W
32K
8
CMOS RAM
TMS370
VDD
RESIN
0.1 µF
0.1 µF
0.1 µF
Figure 10. Data Retention During Power Down Using Static CMOS RAMs
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
13
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
D (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
4040047/D 10/96
0.228 (5,80)
0.244 (6,20)
0.069 (1,75) MAX 0.010 (0,25)
0.004 (0,10)
1
14
0.014 (0,35)
0.020 (0,51)
A
0.157 (4,00)
0.150 (3,81)
7
8
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.010 (0,25)
PINS **
0.008 (0,20) NOM
A MIN
A MAX
DIM
Gage Plane
0.189
(4,80)
(5,00)
0.197
8
(8,55)
(8,75)
0.337
14
0.344
(9,80)
16
0.394
(10,00)
0.386
0.004 (0,10)
M
0.010 (0,25)
0.050 (1,27)
0°–8°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
D. Falls within JEDEC MS-012
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER
4040140/D 10/96
28 TERMINAL SHOWN
B
0.358
(9,09)
MAX
(11,63)
0.560
(14,22)
0.560
0.458
0.858
(21,8)
1.063
(27,0)
(14,22)
A
NO. OF
MINMAX
0.358
0.660
0.761
0.458
0.342
(8,69)
MIN
(11,23)
(16,26)
0.640
0.739
0.442
(9,09)
(11,63)
(16,76)
0.962
1.165
(23,83)
0.938
(28,99)
1.141
(24,43)
(29,59)
(19,32)(18,78)
**
20
28
52
44
68
84
0.020 (0,51)
TERMINALS
0.080 (2,03)
0.064 (1,63)
(7,80)
0.307
(10,31)
0.406
(12,58)
0.495
(12,58)
0.495
(21,6)
0.850
(26,6)
1.047
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.035 (0,89)
0.010 (0,25)
121314151618 17
11
10
8
9
7
5
432
0.020 (0,51)
0.010 (0,25)
6
12826 27
19
21
B SQ
A SQ 22
23
24
25
20
0.055 (1,40)
0.045 (1,14)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
15
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE PACKAGE
0.310 (7,87)
0.290 (7,37)
0.014 (0,36)
0.008 (0,20)
Seating Plane
4040107/C 08/96
5
4
0.065 (1,65)
0.045 (1,14)
8
1
0.020 (0,51) MIN
0.400 (10,20)
0.355 (9,00)
0.015 (0,38)
0.023 (0,58)
0.063 (1,60)
0.015 (0,38)
0.200 (5,08) MAX
0.130 (3,30) MIN
0.245 (6,22)
0.280 (7,11)
0.100 (2,54)
0°–15°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification only on press ceramic glass frit seal only.
E. Falls within MIL-STD-1835 GDIP1-T8
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
16 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
P (R-PDIP-T8) PLASTIC DUAL-IN-LINE PACKAGE
4040082/B 03/95
0.310 (7,87)
0.290 (7,37)
0.010 (0,25) NOM
0.400 (10,60)
0.355 (9,02)
58
41
0.020 (0,51) MIN
0.070 (1,78) MAX
0.240 (6,10)
0.260 (6,60)
0.200 (5,08) MAX
0.125 (3,18) MIN
0.015 (0,38)
0.021 (0,53)
Seating Plane
M
0.010 (0,25)
0.100 (2,54) 0°–15°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
17
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
4040064/E 08/96
14 PIN SHOWN
Seating Plane
1,20 MAX
1
A
7
14
0,19
4,50
4,30
8
6,20
6,60
0,30
0,75
0,50
0,25
Gage Plane
0,15 NOM
0,65 M
0,10
0°–8°
0,10
PINS **
A MIN
A MAX
DIM
2,90
3,10
8
4,90
5,10
14
6,60
6,404,90
5,10
16
7,70
20
7,90
24
9,60
9,80
28
0,15
0,05
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
TLC7701, TLC7725, TLC7703, TLC7733, TLC7705
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
SLVS087L – DECEMBER 1994 – REVISED FEBRUARY 2003
18 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
U (S-GDFP-F10) CERAMIC DUAL FLATPACK
4040179/B 03/95
1.000 (25,40)
0.080 (2,03)
0.250 (6,35)
0.250 (6,35)
0.019 (0,48)
0.025 (0,64)
0.300 (7,62)
0.045 (1,14)
0.006 (0,15)
0.050 (1,27)
0.015 (0,38)
0.005 (0,13)
0.026 (0,66)
0.004 (0,10)
0.246 (6,10)
0.750 (19,05)
110
56
0.250 (6,35)
0.350 (8,89)0.350 (8,89)
0.250 (6,35)
0.050 (1,27)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification only.
E. Falls within MIL STD 1835 GDFP1-F10 and JEDEC MO-092AA
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty . Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third–party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2003, Texas Instruments Incorporated
