Rack & Panel Miniature Side Mount / # 20 Contacts / .040" Dia. / 7.5 Amps JF Series OUTLINE Dimensions are for reference only and are subject to change. Outline drawings on request. Side Mounting, 4 Position Rectangular 2 and 4 Position In-Line JF Series, PIN and Socket, 2 Position In-Line Connectors Dimensions shown are typical for all standard 2 position in-line connectors. .06 1.6 .53 13.5 .76 19.2 .04 1.0 .44 11.1 .34 8.7 .17 4.4 .13 3.2 .08 2.0 .22 5.5 .09 Thru C'Sink 2.3 .28 7.1 .05 Solder Cup 1.3 .17 x 82o 4.3 JF1S1PA JF1P1SA JF Series, PIN and Socket, 4 Position In-Line Connectors Dimensions shown are typical for all standard 4 position in-line connectors. .11 2.8 .55 13.9 .36 9.1 .23 5.9 .76 19.2 .22 5.5 .13 3.2 .04 1.0 .27 6.8 3 x 1.00 25.4 .75 19.1 .16 4.0 .05 Solder Cup 1.3 .10 Thru C'Sink 2.6 .18 x 82o 4.6 JF4SAB JF4PAB Side Mounting, 4 Position Rectangular, 2 and 4 Position In-Line JF Series, PIN and Socket, 4 Position Rectangular Connectors Dimensions shown are typical for all standard 4 position rectangular connectors. .13 3.2 .06 1.6 .53 13.5 .44 11.1 .76 19.2 .04 1.0 .09 Thru C'Sink 2.3 .34 8.7 .17 4.4 .25 6.4 .22 5.5 .05 1.3 Solder Cup .08 2.0 .28 7.1 .17 x 82o 4.3 JF2S2PAB JF2P2SAB Winchester/Retconn 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 79 Rack & Panel Miniature Side Mount / # 20 Contacts / .040" Dia. / 7.5 Amps JF Series J F-2P 20 connectors assembled The versitile JF Series has a countersunk mounting hole and narrow width permitting exceptionally flat mounting. Maximum circuit density is provided with many positive polarizations. "Custom" multi-contact connectors are readily available by using the building block technique shown above. OUTLINE Dimensions are for reference only and are subject to change. Outline drawings on request. Typical Connector With DIP Solder Termination Right Angle Dip Solder Straight Dip Solder JF Series connectors may be ordered with dip solder and right angle terminations. Consult factory for availability. D .03 0.8 JF1S1PD4 .343 .437 90o .062 R.025 .125 Typical Connectors Assemblies PIN Contact Pos. B PIN Contact Pos. C & D 2x 2x .237 .015 .025 Socket Contact Pos. C & D PIN Contact Pos. A, C & D Socket Contact Pos. B Socket Contact Pos. A, C & D C Socket Molding B B A A Socket Contact Pos. A JF1S1PA PIN Molding PIN Contact Pos. A JF1P1SA Socket Molding Socket Contact Pos. A & B JF4SAB PIN Contact Pos. A & B JF4AB PIN Molding Socket Molding A B Socket Contact Pos. B JF1S3PB C A PIN Molding PIN Contact Pos. B B JF1P3SB Winchester/Retconn 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 80 Rack & Panel Miniature Side Mount / # 20 Contacts / .040" Dia. / 7.5 Amps JF Series ORDERING INFORMATION 2 Position In-Line Connector JF 1S 1P A Step 1 Step 2 ** Step 3 Step 4 Series Code JF Primary Contact and Molding Type Secondary Contact Primary Contact Location Code 1S or 2S* 1P or 2P* 2SR* 2PR* Description Code If Step 2 equals Number of socket contacts 1P = 1S and socket molding. 1S = 1P Number of pin contacts and pin molding. Number of socket contacts pin moldings. Number of pin contacts socket moldings. *For two same type contacts, skip Steps 3 & 4. Code = A or B 4 Position In-Line Connectors JF4 S Step 1 Step 2 Series Code JF4 Primary Contact and Molding Type Code S P AB Step 3 Primary Contact Location ** Description Socket contact and socket molding. Pin contact and pin molding. Number Of Primary Contacts A, B, C or D = 1 AB, AC, AD, BC, BD, or CD = 2 ABC, ABD, ACD, or BCD = 3 Code For four same type contacts: omit step For four same type contacts with molding gender reversed, add R 4 Position Rectangular Connector JF 2S 2P AB Step 1 Step 2 ** Step 3 Series Code JF Primary Contact and Molding Type Secondary Contact Primary Contact Location Code 1S, 2S, 3S or 2S2S Code 3P = 2P = 1P = 3S = 2S = 1S = Code Description Number of socket contacts and socket molding. 1P, 2P, 3P or 2P2P* Number of pin contacts and pin molding. 2S2SR* Number of socket contacts and pin molding. 2P2PR Number of pin contacts and socket molding. *For four same type contacts, skip Steps 3 & 4. Step 4 If Step 2 equals 1S 2S 3S 1P 2P 3P Number Of Primary Contacts A, B, C or D = 1 AB, AC, AD, BC, BD, or CD = 2 ABC, ABD, ACD, or BCD = 3 **For Pictorial Presentation, see RP/84 and RP/85 SPECIFICATIONS Winchester/Retconn Materials Performance Characteristics Moldings (PIN and Socket): Diallyl Orthophthalate Pin Contacts: .040 Brass, gold plated Socket Contacts: Phosphor bronze, gold plated Dielectric Withstanding Voltage: Current Rating: Operating Temperature Range: Termination Type: 1500 VAC (at sea level) 7.5 Amps -55OC to +125OC .050 dia. solder cup to accept #20 AWG stranded wire. 62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com RP / 81