High Stability Thin Film Chip Resistor
≤ 0.05 % (1000 h rated power at 70 °C)
www.vishay.com For technical questions contact: ff3aresistors@vishay.com Document Number: 31006
66 Revision: 06-Jul-06
TNPW
Vishay
TNPW Precision Thin Film Flat Chip Resistors are the
perfect choice for most fields of modern electronics where
reliability and stability is of major concern. Typical
applications include telecommunication, industrial, medical
equipment, high-end computer and audio/video electronics.
FEATURES
•Metal film layer on high quality ceramic
•Protective top coat
•Tin/lead (Pb) solder contacts
•Excellent overall stability at different environmental
conditions ≤ 0.05 % (1000 h rated power at + 70 °C)
•Low temperature coefficient and tight tolerances (± 0.1 %;
± 10 ppm/K)
APPLICATIONS
•Automotive
•Telecommunication
•Medical Equipment
•Industrial Equipment
1) Size not specified in EN 140401-801
2) Rated voltage . The power dissipation on the resistor
generates a temperature rise against the local ambient, depending
on the heat flow support of the printed-circuit board (thermal
resistance). The rated dissipation applies only if the permitted film
temperature is not exceeded
3) Measuring conditions in accordance with EN 140401-801
• TNPW 0402 without marking
• Extended values, tighter tolerances and temperature coefficient
available on request
STANDARD ELECTRICAL SPECIFICATIONS
TNPW0402 TNPW0603 TNPW0805 TNPW1206 TNPW12101) TNPW2010 TNPW25121)
Metric Size RR 1005M RR 1608M RR 2012M RR 3216M RR 3225M RR 5025M RR 6332M
Resistance range
10
Ω
to 100 k
Ω
10
Ω
to 332 k
Ω
10
Ω
to 1 M
Ω
10
Ω
to 2 M
Ω
10
Ω
to 3.01 M
Ω
10
Ω
to 4.99 M
Ω
10
Ω
to 8.87 M
Ω
Resistance
tolerance ± 1 %; ± 0.5 %; ± 0.1 %
Temperature
Coefficent ± 50 ppm/K; ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K ± 50 ppm/K; ± 25 ppm/K
Climatic category
(LCT/UCT/days) 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56
Rated dissipation,
P70 2) 0.063 W 0.1 W 0.125 W 0.25 W 0.33 W 0.4 W 0.5 W
Operating voltage,
Umax AC/DC 50 V 75 V 150 V 200 V 200 V 300 V 300 V
Maximum permissible
film temperature
155 °C 155 °C 155 °C 155 °C 155 °C 155 °C 155 °C
Thermal resistance
3)
870 K/W 550 K/W 440 K/W 220 K/W 170 K/W 140 K/W 110 K/W
Insulation voltage:
Uins 1 min 75 V 100 V 200 V 300 V 300 V 300 V 300 V
continuous 75 V 75 V 75 V 75 V 75 V 75 V 75 V
Failure rate ≤ 0.3 x 10-9/h ≤ 0.3 x 10-9/h ≤ 0.3 x 10-9/h ≤ 0.3 x 10-9/h ≤ 0.3 x 10-9/h ≤ 0.3 x 10-9/h ≤ 0.3 x 10-9/h
Weight/1000 pcs. 0.65 g 2 g 5.5 g 10 g 16 g 28 g 39 g
PR×
Document Number: 31006 For technical questions contact: ff3aresistors@vishay.com www.vishay.com
Revision: 06-Jul-06 67
TNPW
High Stability Thin Film Chip Resistor
≤ 0.05 % (1000 h rated power at 70 °C) Vishay
DIMENSIONS
SIZE DIMENSIONS millimeters
INCH METRIC L W H T1 T2
0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.2 ± 0.10
0603 1608 1.6 ± 0.10 0.85 ± 0.10 0.45 ± 0.10 0.3 ± 0.20
0805 2012 2.0 ± 0.15 1.25 ± 0.15 0.45 ± 0.10 0.4 ± 0.20
1206 3216 3.2 ± 0.15 1.6 ± 0.15 0.55 ± 0.10 0.5 ± 0.25
1210 3225 3.2 ± 0.15 2.45 ± 0.15 0.60 ± 0.15 0.5 ± 0.25
2010 5025 5.0 ± 0.15 2.5 ± 0.15 0.60 ± 0.15 0.6 ± 0.25
2512 6332 6.3 ± 0.20 3.1 ± 0.15 0.60 ± 0.15 0.6 ± 0.25
SOLDER PAD DIMENSIONS millimeters
SIZE REFLOW SOLDERING WAVE SOLDERING
INCH METRIC a b l a b l
0402 1005 0.4 0.6 0.5 - - -
0603 1608 0.5 0.9 1.0 0.9 0.9 1.0
0805 2012 0.7 1.3 1.2 0.9 1.3 1.3
1206 3216 0.9 1.7 2.0 1.1 1.7 2.3
1210 3225 0.9 2.5 2.0 1.1 2.5 2.3
2010 5025 1.0 2.5 3.9 1.2 2.5 3.9
2512 6332 1.0 3.2 5.2 1.2 3.2 5.2
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE TCR TOLERANCE RESISTANCE VALUE E-SERIES
TNPW0402
± 50 ppm/K
± 1 % 10R - 100K 24 -96
± 0.5 % 10R - 100K 24-192
± 0.1 % 47R - 100K
± 25 ppm/K
± 1 % 10R - 100K 24 -96
± 0.5 % 10R - 100K
24-192
± 0.1 %
47R - 100K
± 15 ppm/K ± 0.1 %
± 10 ppm/K ± 0.1 %
TNPW0603
± 50 ppm/K
± 1 % 10R - 332K 24 -96
± 0.5 % 10R - 332K 24-192
± 0.1 %
± 25 ppm/K
± 1 % 10R - 332K 24 -96
± 0.5 % 10R - 332K
24-192
± 0.1 %
± 15 ppm/K ± 0.1 % 47R - 332K
± 10 ppm/K ± 0.1 %
TNPW0805
± 50 ppm/K
± 1 % 10R - 1M0 24 -96
± 0.5 % 10R - 1M0 24-192
± 0.1 %
± 25 ppm/K
± 1 % 10R - 1M0 24 -96
± 0.5 % 10R - 1M0
24-192
± 0.1 %
± 15 ppm/K ± 0.1 % 47R - 1M0
± 10 ppm/K ± 0.1 %
www.vishay.com For technical questions contact: ff3aresistors@vishay.com Document Number: 31006
68 Revision: 06-Jul-06
TNPW
Vishay High Stability Thin Film Chip Resistor
≤ 0.05 % (1000 h rated power at 70 °C)
1) Please refer to PACKING table
TNPW1206
± 50 ppm/K
± 1 % 10R - 2M0 24 -96
± 0.5 % 10R - 2M0 24-192
± 0.1 %
± 25 ppm/K
± 1 % 10R - 2M0 24 -96
± 0.5 % 10R - 2M0
24-192
± 0.1 %
± 15 ppm/K ± 0.1 % 47R - 2M0
± 10 ppm/K ± 0.1 %
TNPW1210
± 50 ppm/K
± 1 % 10R - 3M01 24 -96
± 0.5 % 10R - 3M01 24-192
± 0.1 % 47R - 2M13
± 25 ppm/K
± 1 % 10R - 3M01 24 -96
± 0.5 % 10R - 3M01
24-192
± 0.1 %
47R - 2M13
± 15 ppm/K ± 0.1 %
± 10 ppm/K ± 0.1 %
TNPW2010
± 50 ppm/K
± 1 % 10R - 4M99 24 -96
± 0.5 % 10R - 4M99 24-192
± 0.1 % 47R - 1M0
± 25 ppm/K
± 1 % 10R - 4M99 24 -96
± 0.5 % 10R - 4M99 24-192
± 0.1 % 47R - 1M0
TNPW2512
± 50 ppm/K
± 1 % 10R - 8M87 24 -96
± 0.5 % 10R - 8M87 24-192
± 0.1 % 47R - 1M0
± 25 ppm/K
± 1 % 10R - 8M87 24 -96
± 0.5 % 10R - 8M87 24-192
± 0.1 % 47R - 1M0
PART NUMBER AND PRODUCT DESCRIPTION
Products can be ordered using either the Product Description or the Part Number.
For ordering TNPW with lead (Pb)-free contacts please refer to latest edition of data sheet TNPW e3.
Part Number: (TIN LEAD) TNPW12061K32DETA
MODEL VALUE TOLERANCE TCR PACKING1) SPECIAL
TNPW 0402
TNPW 0603
TNPW 0805
TNPW 1206
TNPW 1210
TNPW 2010
TNPW 2512
R = Decimal
K = Thousand
M = Million
(4 digits)
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
H = ± 50 ppm/K
E = ± 25 ppm/K
X = ± 15 ppm/K
Y = ± 10 ppm/K
TA
TC
TD
TF
TG
CN
TY
up to 2 digits
Blank = standard
Historical Part Number: TNPW-1206 1.32K 0.5 % T-9 RT1(will continue to be accepted)
TNPW-1206 1.32K 0.5 % T-9 RT1
MODEL RESISTANCE VALUE ΩTOLERANCE TCR PACKING1)
TNPW-0402
TNPW-0603
TNPW-0805
TNPW-1206
TNPW-1210
TNPW-2010
TNPW-2512
Examples:
1K32 = 1320 Ω
99.68K = 99 680 Ω
360 = 360 Ω
± 0.1 %
± 0.5 %
± 1.0 %
T-2 = ± 50 ppm/K
T-9 = ± 25 ppm/K
T-10 = ± 15 ppm/K
T-13 = ± 10 ppm/K
RT1
RT6
RT7
R02
R67
R52
R75
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE TCR TOLERANCE RESISTANCE VALUE E-SERIES
NPW12061KT32DETA
TNPW
High Stability Thin Film Chip Resistor
≤ 0.05 % (1000 h rated power at 70 °C) Vishay
Document Number: 31006 For technical questions contact: ff3aresistors@vishay.com www.vishay.com
Revision: 06-Jul-06 69
1) R52/CN only for precision resistors with tolerance ± 0.1 % and temperature coefficient
≤
± 25 ppm/k
DESCRIPTION
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a super high
grade ceramic substrate and conditioned to achieve the
desired temperature coefficient. A special laser is used to
achieve the target value by smoothly cutting a meander
groove in the resistive layer without damaging the ceramics.
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems.
PACKING
MODEL
TAPE
WIDTH
[mm]
PITCH
[mm]
REEL DIAMETER
[mm/inch]
PIECES
PER
REEL
PACKING
CODE
for PRODUCT
DESCRIPTION
PACKING
CODE
for PART
NUMBER
TYPE OF
CARRIER TAPE
TNPW 0402 8 2 180/7 10 000 RT7 TD Paper
TNPW 0603
TNPW 0805
TNPW 1206
TNPW 1210
8
4
180/7 1000 R521CN1Paper
TNPW 0603
TNPW 0805
TNPW 1206
TNPW 1210
8 4 180/7 5000 RT1 TA Paper
TNPW 0603
TNPW 0805
TNPW 1206
TNPW 1210
8 4 330/13 20 000 RT6 TC Paper
TNPW 2010 12 4 180/7 1000 R75 TY Blister
4000 R02 TF Blister
TNPW 2512 12 4 180/7 1000 R75 TY Blister
2000 R67 TG Blister
120
110
100
90
80
70
6010 100 1K 10K 100K
Non-Linearity Resistance Value in Ω
Non-Linearity A3 in dB
TNPW1206
TNPW0805
TNPW0603
TNPW0402
3
2
1
0.5
0.3
0.1
0.01
0.03
0.05
100 1K 10K 100K 1M
Current Noise Resistance Value in Ω
Current Noise in μV/V
TNPW0402
TNPW0805
TNPW0603
TNPW1206
www.vishay.com For technical questions contact: ff3aresistors@vishay.com Document Number: 31006
70 Revision: 06-Jul-06
TNPW
Vishay High Stability Thin Film Chip Resistor
≤ 0.05 % (1000 h rated power at 70 °C)
60
40
20
0
- 20
- 40
- 60
- 80
TNPW0603
HF Performance
1510 50 100 500 1000
Frequency f in MHz
[Z]-RO in %
RO
10 Ω
100 Ω
1K Ω
4.75K Ω
10K Ω
60
40
20
0
- 20
- 40
- 60
- 80
1 5 10 50 100 500
Frequency f in MHz
HF Performance
Phase Angle in ϑ°
TNPW0603
10 Ω
100 Ω
1K Ω
4.75K Ω
10K Ω
1000
60
40
20
0
- 20
- 40
- 60
- 80
[Z]-RO in %
RO
HF Performance
1510 50 100 500 1000
Frequency f in MHz
TNPW0805
10 Ω
100 Ω
1K Ω
10K Ω
60
40
20
0
- 20
- 40
- 60
- 80
Phase Angle in ϑ°
1 5 10 50 100 500
Frequency f in MHz
HF Performance
TNPW0805
10 Ω
100 Ω
1K Ω
10K Ω
1000
90
80
70
60
50
40
30
20
10
0
Temperature Rise
0 0.1 0.2 0.3 0.4 0.5
Power in W
0402 1206
08050603
2010
2512
Temperature Rise In °C
Derating
120
100
80
60
40
20
0
- 55 - 25 0 25 50 75 100 125 150 175
Ambient Temperature in
°
C
% nI rewoP detaR
70
EN
Document Number: 31006 For technical questions contact: ff3aresistors@vishay.com www.vishay.com
Revision: 06-Jul-06 71
TNPW
High Stability Thin Film Chip Resistor
≤ 0.05 % (1000 h rated power at 70 °C) Vishay
3K
1K
100
10 10R 100R 1K 10K 100K
Single-Pulse High Voltage Overload Test
1.2/50 µs EN140000 4.27
Resistance Value in Ω
Test Voltage in V
TNPW0805
TNPW0603
3K
1K
100
10
10R 100R 1K 10K 100K
Single-Pulse High Voltage Overload Test
10/700 µs EN140000 4.27
Resistance Value in Ω
Test Voltage in V
TNPW0805
TNPW0603
100
10
1
0.1
0.0110
-5
10
-4
10
-3
10
-2
10
-1
110
Square Pulse t
i
in sPulse Rating P > 0
Power Rating P in W
Secondary conditions:
a) P > 0 (peak pulse, single pulse)
b) ϑu ≤ 70 °C
c) Û
max
see diagram (Max pulse voltage)
TNPW0805
TNPW0603
100
10
1
0.1
0.0110-5 10-4 10-3 10-2 10-1 110
Square Pulse tiin sPulse Rating P ≤ P70
Secondary conditions:
a) P ≤ P70 (permissible constant power at ϑu = 70 °C)
b) ϑu ≤ 70 °C
c) Ûmax see diagram (Max. pulse voltage)
Power Rating P in W
TNPW0805
TNPW0603
500
300
400
200
100
0
Square Pulse t
i
in s
Maximum Pulse Voltage
10
-5
10
-4
10
-3
10
-2
10
-1
110
Secondary conditions:
a) P see diagram (Pulse Rating)
b) ϑu ≤ 70 °C
Pulse Voltage
Û
max
in V
TNPW0805
TNPW0603
www.vishay.com For technical questions contact: ff3aresistors@vishay.com Document Number: 31006
72 Revision: 06-Jul-06
TNPW
Vishay High Stability Thin Film Chip Resistor
≤ 0.05 % (1000 h rated power at 70 °C)
TEST AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
EN 60115-1, Generic specification (includes tests)
EN 140 400, Sectional specification (includes schedule for
qualification approval)
EN 140 401-801, Detail specification (includes schedule for
conformance inspection)
The following table contains only the most important tests.
For the full test schedule refer to the documents listed above.
The testing also covers most of the requirements specified
by EIA/IS-703 and JIS-C-5202. The tests are carried out in
accordance with IEC 60068 and under standard atmospheric
conditions in accordance with IEC 60068-1, 5.3. Climatic
category LCT/UCT/56 (rated temperature range: Lower
Category Temperature, Upper Category Temperature; damp
heat, long term, 56 days) is valid. Unless otherwise specified
the following values apply:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1 060 mbar).
The components are mounted for testing on boards in
accordance with EN 60115-1, 4.31 unless otherwise
specified. The parameters stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140 401-801. However, some
additional tests and a number of improvements against those
minimum requirements have been included.
TEST PROCEDURES AND REQUIREMENTS
TEST CONDITIONS OF TEST
TEST RESULTS
TNPW0402 TO TNPW2512
TOLERANCES
± 0.1 %; ± 0.25 %
± 0.5 %; ± 1.0 %< 100R ≥ 100R
Endurance Test at 70 °C
IEC 60115-1 4.25.1
1000 hours at 70 °C, 1.5 hours “ON”, 0.5 hours
“OFF”
≤
± 0.1 %
≤
± 0.05 %
≤
± 0.25 %
Endurance at UCT
IEC 60115-1 4.25.3 1000 hours at 125 °C without load
≤
± 0.1 %
≤
± 0.05 %
≤
± 0.5 %
Overload Test
IEC 60115-1 4.13
Short time overload for 2 seconds
2.5 x rated voltage or
≤
2 x limiting element voltage
≤
± 0.05 %
≤
± 0.02 %
≤
± 0.1 %
Thermal Shock
IEC 60115-1 4.19, IEC 60068-2-14
Rapid change between upper and lower
category temperature
≤
± 0.05 %
≤
± 0.02 %
≤
± 0.1 %
Damp Heat Steady State
IEC 60115-1 4.24, IEC 60068-2-3 56 days at 40 °C and 93 % relative humidity
≤
± 0.1 %
≤
± 0.05 %
≤
± 0.5 %
Resistance to Soldering Heat
IEC 60115-1 4.18, IEC 60068-2-20 10 seconds at 260 °C solder bath temperature
≤
± 0.05 %
≤
± 0.02 %
≤
± 0.1 %
APPLICABLE SPECIFICATIONS
• CECC40000/40400
• EN140400
• EIA 575
• EN 140401-801
• EN 60115-1
• IEC 60286-3
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
