RF01004, Rev D (11/6/12) ©2012 Microsemi Corporation Page 1 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
Available Surface Mount 15,000 W att
Transient Voltage Suppressor
High-Reliability
screening available
in reference to
MIL-PRF-19500
DESCRIPTION
These high power 15 kW rated transient voltage suppressors in a surface mount package are
provided with design features to minimize thermal resistance and cumulative heating. They
are particularly effective at meeting the multi-stroke lightning standard RTCA DO-160, section
22 for aircraft design. This efficient low profile package design is offered in standoff voltage
selections (VWM) of 7 volt to 200 volts in either unidirectional or bidirectional construction.
PLAD
(The cathode is the metal base
under the body of this device.)
Also available:
PLAD30KP
(30,000 watts)
MPLAD30KP14A thru
MPLAD30KP400CA
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
• Available in both unidirectional and bidirection al con stru ctio n ( bidirectional with CA suffix).
• High reliability with wafer fabrication and assembly lot traceability.
• All parts surge tested.
• Low profile surface mount package.
• Optional upscreening is available with various screening and conformance inspection options based
on MIL-PRF-19500. Refer to Upscreened Plastic Products brochure on our web site for more details
on the screening options.
• Suppresses transients up to 15,000 W @ 10/1000 μs (see figure 1).
• Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B.
• RoHS compliant versions are available.
• 3σ lot norm screening performed on standby current (ID).
APPLICATIONS / BENEFITS
• Protect ion from switch ing tr an sien ts and indu ced RF.
• Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4.
• Secondary lightning protection per IEC 61000-4-5 with 42 ohms sour ce imp edan ce:
Class 1,2,3,4,5: M P LAD 15KP7. 0A to 200CA
• Secondary lightning protection per IEC 61000-4-5 with 12 ohms sour ce imp edan ce:
Class 1,2,3,4: MPLAD15KP7.0A to 200CA
• Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance:
Class 2,3: MPLAD15KP7.0A to 200CA
Class 4: MPLAD15KP5.0 t o 54CA
• Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 μs at 25 ºC)*:
Level 4: MPLAD15K P7.0A to 200CA
Level 5: MPLAD15K P7.0A to 100CA
• Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 μs at 25 ºC)*:
Level 4: MPLAD15K P7.0A to 28CA
*See MicroNote 132 for further temperature derating selection.
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
RF01004, Rev D (11/6/12) ©2012 Microsemi Corporation Page 2 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
MAXIMUM RATINGS @ 25 oC unless otherwise specified
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
TJ and TSTG
-55 to +150
ºC/W
Thermal Resi stan ce Junction-to-Ambient (1)
RӨJA
50
ºC/W
Thermal Resi stan ce Jun cti on-to-Case
RӨJC
0.7
ºC/W
Peak Pulse Power @ 10/1000 µs (2)
PPP
15,000
W
tclamping (0 volts to V(BR) min) Unidirectional
<100
<5
ps
ns
Forward Clamping Voltage @ 500 Amps (3)
VFS
2.0
V
Forward Surge Current (3)
IFSM
1500
A
Solder Temperature @ 10 s
TSP
260
ºC
Steady-State Power dissipation
(5)
TA = 25 °C
TC = 100 °C
PD 2.5
(1)
71
(4)
W
W
Notes: 1 . When mounted on FR4 PC board with recommended mounting pad (see pad layout).
2. Als o see figures 1 and 2. With impulse repetition rate (duty factor) of 0.05% or less.
3. At 8.3 ms half-sine wave (unidirectional devices only).
4. Case temperature controll ed on heat sink as specified.
5. See MicroNote 134 for derating PPP when also applyi ng st eady-stat e power.
MECHANICAL and PACKAGING
• CASE: Void-free trans fer mol ded thermosetting epoxy body meeting UL94V-0.
• TERMINALS: Tin-lead (90% Sn, 10% Pb) or RoHS (100% Sn) compliant anneal ed matte-tin plating readily solderable per MIL-
STD-750, method 2026.
• MARKING: Body marked with part number.
• POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom).
• Available in bulk or custom tape-and-reel packag ing.
• TAPE-AND-REEL: Standard per EIA-481-B (add “TR” suffix to part number). Consult factory for quantities.
• WEIGHT: 1 gram (approximate).
• See Package Dimensions on last page.
PART NOMENCLATURE
M PLAD 15K P 7.0 CA e3
Reliability Level*
M
MA
MX
MXL
*(see High Reliability Up-
Screened Plastic Products
Portfolio)
Package Designation
PPP Rating (W)
RoHS Compli ance
e3 = RoHS compliant
Blank = non-RoHS compliant
Polarity
A = Unidirectional
CA = Bidirectional
Reverse Standoff Voltage
Plastic
RF01004, Rev D (11/6/12) ©2012 Microsemi Corporation Page 3 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
SYMBOLS & DEFINITIONS
Symbol
Definition
I(BR)
Breakdown Current: The current used for measuring breakdown voltage V(BR).
ID
Standby Current: The current at the rated standoff voltage VWM.
IPP
Peak Impulse Current: The peak current during the impulse.
V(BR)
Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
VC
Clamping Voltage: Clamping voltage at I
PP
(peak pulse current) at the specified pulse conditions (typically shown as
maximum value).
VWM
Rated Working Standoff Voltage: The maximum peak voltage that can be applied over the operating temperature
range.
αV(BR)
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by change in temperature.
ELECTRICAL CHARACTERISTICS @ 25 ºC unless otherwise stated
MICROSEMI PART NUMBER
REVERSE
STANDOFF
VOLTAGE
VWM
(Note 1)
BREAKDOWN
VOLTAGE
V(BR) @ I(BR)
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
MAXIMUM
STANDBY
CURRENT
ID @ VWM
MAXIMUM
PEAK
PULSE
CURRENT
IPP
(FIG. 3)
MAXIMUM
TEMPERATURE
COEFFICIENT
αV(BR)
Unidirectional
Bidirectional
Volts
Volts
mA
Volts
µ
A
A
mV/ ºC
MPLAD15KP7.0A
MPLAD15KP7.0CA
7.0
7.78 – 8.60
150
12.0
3000
1251
5.0
MPLAD15KP7.5A
MPLAD15KP8.0A
MPLAD15KP7.5CA
MPLAD15KP8.0CA
7.5
8.0
8.33 – 9.21
8.89 – 9.83
5
5
12.9
13.6
750
450
1164
1101
6.0
6.0
MPLAD15KP8.5A
MPLAD15KP9.0A
MPLAD15KP8.5CA
MPLAD15KP9.0CA
8.5
9.0
9.44 – 10.4
10.0 – 11.1
5
5
14.4
15.4
150
60
1041
975
7.0
8.0
MPLAD15KP10A
MPLAD15KP11A
MPLAD15KP10CA
MPLAD15KP11CA
10
11
11.1 – 12.3
12.2 – 13.5
5
5
17.0
18.2
45
10
882
822
9.0
10
MPLAD15KP12A
MPLAD15KP13A
MPLAD15KP12CA
MPLAD15KP13CA
12
13
13.3 – 14.7
14.4 – 15.9
5
5
19.9
21.5
10
10
753
696
11
12
MPLAD15KP14A
MPLAD15KP15A
MPLAD15KP14CA
MPLAD15KP15CA
14
15
15.6 – 17.2
16.7 – 18.5
5
5
23.2
24.4
10
10
645
618
13
15
MPLAD15KP16A
MPLAD15KP17A
MPLAD15KP16CA
MPLAD15KP17CA
16
17
17.8 – 19.7
18.9 – 20.9
5
5
26.0
27.6
10
10
576
543
16
18
MPLAD15KP18A
MPLAD15KP20A
MPLAD15KP18CA
MPLAD15KP20CA
18
20
20.0 – 22.1
22.2 – 24.5
5
5
29.2
32.4
10
10
516
462
19
22
MPLAD15KP22A
MPLAD15KP24A
MPLAD15KP22CA
MPLAD15KP24CA
22
24
24.4 – 26.9
26.7 – 29.5
5
5
35.5
38.9
10
10
423
384
24
27
MPLAD15KP26A
MPLAD15KP28A
MPLAD15KP26CA
MPLAD15KP28CA
26
28
28.9 – 31.9
31.1 – 34.4
5
5
42.1
45.5
10
10
357
330
29
30
MPLAD15KP30A
MPLAD15KP33A
MPLAD15KP30CA
MPLAD15KP33CA
30
33
33.3 – 36.8
36.7 – 40.6
5
5
48.4
53.3
10
10
309
282
35
38
MPLAD15KP36A
MPLAD15KP40A
MPLAD15KP36CA
MPLAD15KP40CA
36
40
40.0 – 44.2
44.4 – 49.1
5
5
58.1
64.5
10
10
258
234
40
45
MPLAD15KP43A
MPLAD15KP45A
MPLAD15KP43CA
MPLAD15KP45CA
43
45
47.8 – 52.8
50.0 – 55.3
5
5
69.4
72.7
10
10
216
207
49
51
MPLAD15KP48A
MPLAD15KP51A
MPLAD15KP48CA
MPLAD15KP51CA
48
51
53.3 – 58.9
56.7 – 62.7
5
5
77.4
82.4
10
10
195
183
55
60
MPLAD15KP54A
MPLAD15KP58A
MPLAD15KP54CA
MPLAD15KP58CA
54
58
60.0 – 66.3
64.4 – 71.2
5
5
87.1
93.6
10
10
171
159
64
69
MPLAD15KP60A
MPLAD15KP64A
MPLAD15KP60CA
MPLAD15KP64CA
60
64
66.7 – 73.7
71.1 – 78.6
5
5
96.8
103
10
10
156
147
70
75
MPLAD15KP70A
MPLAD15KP75A
MPLAD15KP70CA
MPLAD15KP75CA
70
75
77.8 – 86.0
83.3 – 92.1
5
5
113
121
10
10
132
123
84
90
MPLAD15KP78A
MPLAD15KP85A
MPLAD15KP78CA
MPLAD15KP85CA
78
85
86.7 – 95.8
94.4 – 104.0
5
5
126
137
10
10
120
108
94
102
MPLAD15KP90A
MPLAD15KP100A
MPLAD15KP90CA
MPLAD15KP100CA
90
100
100 – 111
111 – 123
5
5
146
162
10
10
102
93
109
122
MPLAD15KP110A
MPLAD15KP120A
MPLAD15KP110CA
MPLAD15KP120CA
110
120
122 – 135
133 – 147
5
5
177
193
10
10
84
78
132
145
MPLAD15KP130A
MPLAD15KP150A
MPLAD15KP130CA
MPLAD15KP150CA
130
150
144 – 159
167 – 185
5
5
209
243
10
10
71
62
157
183
MPLAD15KP160A
MPLAD15KP170A
MPLAD15KP160CA
MPLAD15KP170CA
160
170
178 – 197
189 – 209
5
5
259
275
10
10
58
55
195
207
MPLAD15KP180A
MPLAD15KP200A
MPLAD15KP180CA
MPLAD15KP200CA
180
200
200 – 221
222 – 245
5
5
291
322
10
10
52
47
219
243
NOTE 1: Transient Voltage Suppressors are normally selected with reverse standoff voltage VWM, which should be equal to or greater than the
peak operating voltage.
NOTE 2: Items listed in bold above are available ex-stock or with a short lead-time.
RF01004, Rev D (11/6/12) ©2012 Microsemi Corporation Page 4 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
GRAPHS
tp – Puls e T im e – sec
FIGURE 1
Peak Pulse Power vs. Pulse Time
(to 50% of exponentially decaying pulse)
Test waveform parameters: tr = 10 µs, tp = 1000 µs
Figure 2
Pulse Waveform
I
PP
Peak Pulse Current - % I
PP
P
PP
Peak Pulse Power -kW
RF01004, Rev D (11/6/12) ©2012 Microsemi Corporation Page 5 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
GRAPHS (continued)
TL Lead Temperature ºC
FIGURE 3
Derating Curve
PPP Peak Pulse Power -kW
RF01004, Rev D (11/6/12) ©2012 Microsemi Corporation Page 6 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
PACKAGE DIMENSIONS
PAD LAYOUT
Ref.
Dimensions
Inch
Millimeters
Min
Max
Min
Max
A1
0.485
0.495
12.32
12.57
A2
0.445
0.455
11.30
11.56
B
0.145
0.155
3.68
3.94
C
0.585
0.595
14.86
15.11
D
0.200
0.210
5.08
5.33
F
0.008
0.013
0.20
0.33
G
0.055
0.065
1.40
1.65
H
0.015
0.025
0.38
0.64
Ref.
Dimensions
Inch
Millimeters
Min
Max
Min
Max
A
0.465
0.475
11.81
12.07
B
0.225
0.235
5.72
5.97
C
0.095
0.105
2.41
2.67
D
0.04
0.05
1.02
1.27