www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.025/02/13
Dual Series Switching Diode
Features:
• Fast Switching Speed
• High Conductance
• Connected In Series
• Surface Mount Package Ideally Suited for
Automatic Insertion
Applications:
For general purpose switching application
Max. Rating @ Ta = 25°C unless otherwise specied
Parameter Symbol Limits Unit
Non repetitive peak reverse voltage Vrm 100 V
Repetitive peak reverse voltage
Working peak reverse voltage
DC reverse voltage
Vrrm
Vrms
Vr
75 V
Peak forward surge current @t = 1s
@t = 1μs Ifsm 1
2A
Forward continuous current Ifm 300 mA
Average rectied output current Io150 mA
Power dissipation Pd200 mW
Junction and storage temperature Tj, Tstg -65 to +150 °C
Electrical Characteristics @ Ta = 25°C unless otherwise specied
Parameter Symbol Conditions Min. Max. Unit
Reverse voltage leakage current IrVr = 75V
Vr = 20V -2.5
25
A
nA
Forward voltage Vf
If = 1mA
If = 10mA
If = 50mA
If = 150mA
-
715
855
1,000
1,250
mV
Junction capacitance CjVr = 0V, f = 1MHz - 2 V
Reverse recovery time trr If = Ir = 10mA,
Vr = 5V, RC = 100Ω - 4 ns
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.025/02/13
Dual Series Switching Diode
Typical Characteristics @ Ta = 25°C unless otherwise specied
Plastic surface mounted package
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.025/02/13
Dual Series Switching Diode
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Part Number Table
Description Part Number
Dual series switching diode BAV99W-7-F
Package Information
Device Package Shipping
BAV99W-7-F SOT-323 3,000 / Tape & Reel
Soldering Footprint
