CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 150 Axial Leaded Metallized Polyester
The Type 150 series axial lead metallized polyester
non inductive capacitors are available in bulk or on
tape and reel for automatic insertion. Type 150 is a
general purpose capacitor for use in blocking, bypass,
decoupling, smoothing and some timing applica-
tions.
Flame Retardant Wrap and Fill Axial Leaded Capacitors
Highlights
• Available on tape and reel or bulk
• Epoxy end ll meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar
Specications
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Tempeature Range:
Dielectric Withstand Voltage:
Dissipation Factor (DF):
0.001 µF to 10.0 µF
63 to 1000 Vdc
±5%, ±10%, ±20%
–55 ºC to +125 ºC (derate linearly to 50% rated voltage
at 125 ºC)
1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC
tgd x 10–4 at +25 ºC ±5 ºC
kHz C ≤0.1 µF 0.1 µF <C ≤1 µF C >1 µF
1 80 80 100
10 150 150 —
100 250 — —
Insulation Resistance:
Self Inductance:
Life Test:
Damp Heat Test:
Soldering:
Long Term Storage Stability:
Maximum Pulse Rise Time dv/dt and Pulse:
Characteristic (Wo):
10,000 MΩ x µF, 30,000 MΩ Min.
1 nH max. per 1 mm lead and body length
1000 hrs @ 85 ºC 1.25 x Vn
95% RH @ +45 ºC for 21 days
260 ºC ±5 ºC for 10 s ±1 s
ΔC/C ≤ ±3% after 2 years
V/n L Max
16.5 19 - 20.5 26.5 - 5.28 31.5 - 33
dV/dt (V/µsec)
W
O
(V
2
/µsec)
50 - 63 4 2 1.5 1
504 252 189 126
100 5 3 2 1
1,000 600 400 300
250 10 7 4 2.5
5,000 3,500 2,000 1,250
400 13.5 10 6.5 4
10,800 8,000 5,200 3,200
630 20 15 10 6
25,200 18,900 12,600 7,500
Complies with the EU Directive 2002/95/
EC requirement restricting the use of
Lead (Pb), Mercury (Hg), Cadmium
(Cd), Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB) and
PolyBrominated Diphenyl Ethers (PBDE).
Type 150 Axial Leaded Metallized Polyester
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Ratings
Outline Drawing
Tape and Reel Specications
L Max Lead Spacing Distance Between
Class(Body Lengty) Reel Flanges
Inches mm Inches mm Inches mm
≤.433 ≤11 2.06 52.4 3 75 1
.551 - .808 14 - 20.5 2.5 63.6 3.4 86 2
≥1.03 ≥26 2.87 73 3.7 95 3
^Add class number (1, 2, or 3) to catalog number to indicate tape and reel
Diameter Quantity per Reel
Inches mm
0.197 5 3,000
.236 thru .256 6.0 trhu 6.5 1,200
0.276 7 1,100
.315 thru .346 8 thru 8.5 800
.354 thru .413 9 thru 10.5 500
.433 thru .512 11 thru 13 300
.551 thru .571 14 thru 14.5 200
>.571 >14.5 Not available
Tinned Copper Leads
D
Max.
L Max.
1.58” ±0.2
(40 ±5 mm)
1.58” ±0.2
(40 ±5 mm)
Ød ±.003
±0.076 mm
Catalog Cap Inches Max Millimeters Max Catalog Cap Inches Max Millimeters Max
Part Number (µF) D L Ød D L Ød Part Number (µF) D L Ød D L Ød
63 Vdc 150274*100CB^ 0.270 0.256 0.650 0.024 6.5 16.5 0.6
150154*63AA^ 0.150 0.197 0.433 0.024 5.0 11.0 0.6 150334*100EB^ 0.330 0.315 0.650 0.031 8.0 16.5 0.8
150154*63BB^ 0.150 0.236 0.650 0.024 6.0 16.5 0.6 150394*100EB^ 0.390 0.315 0.650 0.031 8.0 16.5 0.8
150184*63AA^ 0.180 0.197 0.433 0.024 5.0 11.0 0.6 150474*100DC^ 0.470 0.276 0.807 0.031 7.0 20.5 0.8
150184*63BB^ 0.180 0.236 0.650 0.024 6.0 16.5 0.6 150564*100EC^ 0.560 0.315 0.807 0.031 8.0 20.5 0.8
150224*63BB^ 0.220 0.236 0.650 0.024 6.0 16.5 0.6 150684*100FC^ 0.680 0.335 0.807 0.031 8.5 20.5 0.8
150274*63BB^ 0.270 0.236 0.650 0.024 6.0 16.5 0.6 150824*100HC^ 0.820 0.374 0.807 0.031 9.5 20.5 0.8
150334*63BB^ 0.330 0.236 0.650 0.024 6.0 16.5 0.6 150105*100IC^ 1.000 0.394 0.807 0.031 10.0 20.5 0.8
150394*63CB^ 0.390 0.256 0.650 0.024 6.5 16.5 0.6 100 Vdc
150474*63DB^ 0.470 0.276 0.650 0.024 7.0 16.5 0.6 150155*100IE^ 1.500 0.394 1.102 0.031 10.0 28.0 0.8
150564*63DB^ 0.560 0.276 0.650 0.024 7.0 16.5 0.6 150225*100LE^ 2.200 0.453 1.102 0.031 11.5 28.0 0.8
150684*63DC^ 0.680 0.276 0.807 0.024 7.0 20.5 0.6 150335*100PE^ 3.300 0.531 1.102 0.031 13.5 28.0 0.8
150824*63EC^ 0.820 0.315 0.807 0.031 8.0 20.5 0.8 150475*100RF^ 4.700 0.591 1.299 0.031 15.0 33.0 0.8
150105*63EC^ 1.000 0.315 0.807 0.031 8.0 20.5 0.8 150685*100WF^ 6.800 0.689 1.299 0.031 17.5 33.0 0.8
150155*63HC^ 1.500 0.374 0.807 0.031 9.5 20.5 0.8 150106*100YF^ 10.000 0.807 1.299 0.031 20.5 33.0 0.8
150225*63HE^ 2.200 0.374 1.102 0.031 9.5 28.0 0.8 250 Vdc
150335*63KE^ 3.300 0.433 1.102 0.031 11.0 28.0 0.8 150123*250AA^ 0.012 0.197 0.433 0.024 5.0 11.0 0.6
150475*63ME^ 4.700 0.492 1.102 0.031 12.5 28.0 0.8 150123*250BB^ 0.012 0.236 0.650 0.024 6.0 16.5 0.6
150685*63QF^ 6.800 0.571 1.299 0.031 14.5 33.0 0.8 150153*250AA^ 0.015 0.197 0.433 0.024 5.0 11.0 0.6
150106*63TF^ 10.000 0.610 1.299 0.031 15.5 33.0 0.8 150153*250BB^ 0.015 0.236 0.650 0.024 6.0 16.5 0.6
100 Vdc 150183*250AA^ 0.018 0.197 0.433 0.024 5.0 11.0 0.6
150683*100AA^ 0.068 0.197 0.433 0.024 5.0 11.0 0.6 150183*250BB^ 0.018 0.236 0.650 0.024 6.0 16.5 0.6
150683*100BB^ 0.068 0.236 0.650 0.024 6.0 16.5 0.6 150223*250AA^ 0.022 0.197 0.433 0.024 5.0 11.0 0.6
150823*100AA^ 0.082 0.197 0.433 0.024 5.0 11.0 0.6 150223*250BB^ 0.022 0.236 0.650 0.024 6.0 16.5 0.6
150823*100BB^ 0.082 0.236 0.650 0.024 6.0 16.5 0.6 150273*250AA^ 0.027 0.197 0.433 0.024 5.0 11.0 0.6
150104*100AA^ 0.100 0.197 0.433 0.024 5.0 11.0 0.6 150273*250BB^ 0.027 0.236 0.650 0.024 6.0 16.5 0.6
150104*100BB^ 0.100 0.236 0.650 0.024 6.0 16.5 0.6 * Indicates capacitance tolerance ^If ordering tape and reel,
150124*100BB^ 0.120 0.236 0.650 0.024 6.0 16.5 0.6 J = ±5%, K = ±10%, M = ±20% insert 1, 2, or 3.
150154*100BB^ 0.150 0.236 0.650 0.024 6.0 16.5 0.6 See tape & reel specications to determine which class applies.
150184*100CB^ 0.180 0.256 0.650 0.024 6.5 16.5 0.6 Part Number highlighted in yellow, available until stock is depleted.
150224*100CB^ 0.220 0.256 0.650 0.024 6.5 16.5 0.6 Replacement part number with “BB” case size.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 150 Axial Leaded Metallized Polyester
Catalog Cap Inches Max Millimeters Max Catalog Cap Inches Max Millimeters Max
Part Number (µF) D L Ød D L Ød Part Number (µF) D L Ød D L Ød
250 Vdc 150683*400DC^ 0.0680 0.276 0.807 0.024 7.0 20.5 0.6
150333*250AA^ 0.0330 0.197 0.433 0.024 5.0 11.0 0.6 150823*400EC^ 0.0820 0.315 0.807 0.031 8.0 20.5 0.8
150333*250BB^ 0.0330 0.236 0.650 0.024 6.0 16.5 0.6 150104*400EC^ 0.1000 0.315 0.807 0.031 8.0 20.5 0.8
150393*250AA^ 0.0390 0.197 0.433 0.024 5.0 11.0 0.6 150124*400EC^ 0.1200 0.315 0.807 0.031 8.0 20.5 0.8
150393*250BB^ 0.0390 0.236 0.650 0.024 6.0 16.5 0.6 150154*400GC^ 0.1500 0.354 0.807 0.031 9.0 20.5 0.8
150473*250AA^ 0.0470 0.197 0.433 0.024 5.0 11.0 0.6 150184*400EE^ 0.1800 0.315 1.102 0.031 8.0 28.0 0.8
150473*250BB^ 0.0470 0.236 0.650 0.024 6.0 16.5 0.6 150224*400FE^ 0.2200 0.335 1.102 0.031 8.5 28.0 0.8
150563*250AA^ 0.0560 0.197 0.433 0.024 5.0 11.0 0.6 150274*400GE^ 0.2700 0.354 1.102 0.031 9.0 28.0 0.8
150563*250BB^ 0.0560 0.236 0.650 0.024 6.0 16.5 0.6 150334*400IE^ 0.3300 0.394 1.102 0.031 10.0 28.0 0.8
150683*250BB^ 0.0680 0.236 0.650 0.024 6.0 16.5 0.6 150394*400JE^ 0.3900 0.413 1.102 0.031 10.5 28.0 0.8
150823*250BB^ 0.0820 0.236 0.650 0.024 6.0 16.5 0.6 150474*400LF^ 0.4700 0.453 1.299 0.031 11.5 33.0 0.8
150104*250CB^ 0.1000 0.256 0.650 0.024 6.5 16.5 0.6 150564*400LF^ 0.5600 0.453 1.299 0.031 11.5 33.0 0.8
150124*250DB^ 0.1200 0.276 0.650 0.024 7.0 16.5 0.6 150684*400MF^ 0.6800 0.492 1.299 0.031 12.5 33.0 0.8
150154*250EB^ 0.1500 0.315 0.650 0.031 8.0 16.5 0.8 150824*400PF^ 0.8200 0.531 1.299 0.031 13.5 33.0 0.8
150184*250EB^ 0.1800 0.315 0.650 0.031 8.0 16.5 0.8 150105*400QF^ 1.0000 0.571 1.299 0.031 14.5 33.0 0.8
150224*250FB^ 0.2200 0.335 0.650 0.031 8.5 16.5 0.8 150155*400WF^ 1.5000 0.689 1.299 0.031 17.5 33.0 0.8
150274*250EC^ 0.2700 0.315 0.807 0.031 8.0 20.5 0.8 150225*400YF^ 2.2000 0.807 1.299 0.031 20.5 33.0 0.8
150334*250FC^ 0.3300 0.335 0.807 0.031 8.5 20.5 0.8 630 Vdc
150394*250GC^ 0.3900 0.354 0.807 0.031 9.0 20.5 0.8 150102*630AA^ 0.0010 0.197 0.433 0.024 5.0 11.0 0.6
150474*250HC^ 0.4700 0.374 0.807 0.031 9.5 20.5 0.8 150102*630BB^ 0.0010 0.236 0.650 0.024 6.0 16.5 0.6
150564*250IC^ 0.5600 0.394 0.807 0.031 10.0 20.5 0.8 150122*630AA^ 0.0012 0.197 0.433 0.024 5.0 11.0 0.6
150684*250GE^ 0.6800 0.354 1.102 0.031 9.0 28.0 0.8 150122*630BB^ 0.0012 0.236 0.650 0.024 6.0 16.5 0.6
150824*250HE^ 0.8200 0.374 1.102 0.031 9.5 28.0 0.8 150152*630AA^ 0.0015 0.197 0.433 0.024 5.5 11.0 0.6
150105*250JE^ 1.0000 0.413 1.102 0.031 10.5 28.0 0.8 150152*630BB^ 0.0015 0.236 0.650 0.024 6.0 16.5 0.6
150155*250ME^ 1.5000 0.492 1.102 0.031 12.5 28.0 0.8 150182*630AA^ 0.0018 0.197 0.433 0.024 5.5 11.0 0.6
150225*250PF^ 2.2000 0.531 1.299 0.031 13.5 33.0 0.8 150182*630BB^ 0.0018 0.236 0.650 0.024 6.0 16.5 0.6
150335*250TF^ 3.3000 0.610 1.299 0.031 15.5 33.0 0.8 150222*630AA^ 0.0022 0.197 0.433 0.024 5.5 11.0 0.6
150475*250XF^ 4.7000 0.728 1.299 0.031 18.5 33.0 0.8 150222*630BB^ 0.0022 0.236 0.650 0.024 6.0 16.5 0.6
150685*250ZF^ 6.8000 0.845 1.299 0.031 21.5 33.0 0.8 150272*630AA^ 0.0027 0.197 0.433 0.024 5.5 11.0 0.6
400 Vdc 150272*630BB^ 0.0027 0.236 0.650 0.024 6.0 16.5 0.6
150822*400AA^ 0.0082 0.197 0.433 0.024 5.0 11.0 0.6 150332*630AA^ 0.0033 0.197 0.433 0.024 5.5 11.0 0.6
150822*400BB^ 0.0082 0.236 0.650 0.024 6.0 16.5 0.6 150332*630BB^ 0.0033 0.236 0.650 0.024 6.0 16.5 0.6
150103*400AA^ 0.0100 0.197 0.433 0.024 5.0 11.0 0.6 150392*630AA^ 0.0039 0.197 0.433 0.024 5.5 11.0 0.6
150103*400BB^ 0.0100 0.236 0.650 0.024 6.0 16.5 0.6 150392*630BB^ 0.0039 0.236 0.650 0.024 6.0 16.5 0.6
150123*400AA^ 0.0120 0.197 0.433 0.024 5.0 11.0 0.6 150472*630AA^ 0.0047 0.197 0.433 0.024 5.5 11.0 0.6
150123*400BB^ 0.0120 0.236 0.650 0.024 6.0 16.5 0.6 150472*630BB^ 0.0047 0.236 0.650 0.024 6.0 16.5 0.6
150153*400BB^ 0.0150 0.236 0.650 0.024 6.0 16.5 0.6 150562*630AA^ 0.0056 0.197 0.433 0.024 5.5 11.0 0.6
150183*400BB^ 0.0180 0.236 0.650 0.024 6.0 16.5 0.6 150562*630BB^ 0.0056 0.236 0.650 0.024 6.0 16.5 0.6
150223*400BB^ 0.0220 0.236 0.650 0.024 6.0 16.5 0.6 * Indicates capacitance tolerance ^If ordering tape and reel,
150273*400BB^ 0.0270 0.236 0.650 0.024 6.0 16.5 0.6 J = ±5%, K = ±10%, M = ±20% insert 1, 2, or 3.
150333*400BB^ 0.0330 0.236 0.650 0.024 6.0 16.5 0.6 See tape & reel specications to determine which class applies.
150393*400CB^ 0.0390 0.256 0.650 0.024 6.5 16.5 0.6 Part Number highlighted in yellow, available until stock is depleted.
150473*400DB^ 0.0470 0.276 0.650 0.024 7.0 16.5 0.6 Replacement part number with “BB” case size.
150563*400EB^ 0.0560 0.315 0.650 0.024 8.0 16.5 0.6
Type 150 Axial Leaded Metallized Polyester
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Catalog Cap Inches Max Millimeters Max Catalog Cap Inches Max Millimeters Max
Part Number (µF) D L Ød D L Ød Part Number (µF) D L Ød D L Ød
630 Vdc 1000 Vdc
150682*630AA^ 0.0068 0.197 0.433 0.024 5.5 11.0 0.6 150102*1000CB^ 0.0010 0.256 0.650 0.031 6.5 16.5 0.6
150682*630BB^ 0.0068 0.236 0.650 0.024 6.0 16.5 0.6 150152*1000CB^ 0.0015 0.256 0.650 0.031 6.5 16.5 0.6
150822*630BB^ 0.0082 0.236 0.650 0.024 6.0 16.5 0.6 150222*1000CB^ 0.0022 0.256 0.650 0.031 6.5 16.5 0.6
150103*630BB^ 0.0100 0.236 0.650 0.024 6.0 16.5 0.6 150332*1000CB^ 0.0033 0.256 0.650 0.031 6.5 16.5 0.6
150123*630BB^ 0.0120 0.236 0.650 0.024 6.0 16.5 0.6 150472*1000DB^ 0.0047 0.276 0.650 0.031 7.0 16.5 0.6
150153*630BB^ 0.0150 0.236 0.650 0.024 6.0 16.5 0.6 150682*1000EB^ 0.0068 0.315 0.650 0.031 8.0 16.5 0.8
150183*630CB^ 0.0180 0.256 0.650 0.024 6.5 16.5 0.6 150103*1000DC^ 0.0100 0.276 0.807 0.031 7.0 20.5 0.6
150223*630DB^ 0.0220 0.276 0.650 0.024 7.0 16.5 0.6 150153*1000FC^ 0.0150 0.335 0.807 0.031 8.5 20.5 0.8
150273*630CC^ 0.0270 0.256 0.807 0.024 6.5 20.5 0.6 150223*1000HC^ 0.0220 0.374 0.807 0.031 9.5 20.5 0.8
150333*630EC^ 0.0330 0.315 0.807 0.031 8.0 20.5 0.8 150333*1000FE^ 0.0330 0.335 1.102 0.031 8.5 28 0.8
150393*630EC^ 0.0390 0.315 0.807 0.031 8.0 20.5 0.8 150473*1000HE^ 0.0470 0.374 1.102 0.031 9.5 28 0.8
150473*630EC^ 0.0470 0.315 0.807 0.031 8.0 20.5 0.8 150683*1000KE^ 0.0680 0.433 1.102 0.031 11.0 28 0.8
150563*630FC^ 0.0560 0.335 0.807 0.031 8.5 20.5 0.8 150104*1000NE^ 0.1000 0.512 1.102 0.031 13.0 28 0.8
150683*630GC^ 0.0680 0.354 0.807 0.031 9.0 20.5 0.8 150154*1000OF^ 0.1500 0.551 1.299 0.031 14.0 33 0.8
150823*630HC^ 0.0820 0.374 0.807 0.031 9.5 20.5 0.8 150224*1000WF^ 0.2200 0.689 1.299 0.031 17.5 33 0.8
150104*630FE^ 0.1000 0.335 1.102 0.031 8.5 28.0 0.8 150334*1000YF^ 0.3300 0.807 1.299 0.031 20.5 33 0.8
150124*630GE^ 0.1200 0.354 1.102 0.031 9.0 28.0 0.8 150474*1000Z1F^ 0.4700 0.945 1.299 0.031 24.0 33 0.8
150154*630IE^ 0.1500 0.394 1.102 0.031 10.0 28.0 0.8
150184*630JE^ 0.1800 0.413 1.102 0.031 10.5 28.0 0.8
150224*630LE^ 0.2200 0.453 1.102 0.031 11.5 28.0 0.8 * Indicates capacitance tolerance ^If ordering tape and reel,
150274*630ME^ 0.2700 0.492 1.102 0.031 12.5 28.0 0.8 J = ±5%, K = ±10%, M = ±20% insert 1, 2, or 3.
150334*630NF^ 0.3300 0.512 1.299 0.031 13.0 33.0 0.8 See tape & reel specications to determine which class applies.
150394*630QF^ 0.3900 0.571 1.299 0.031 14.5 33.0 0.8 Part Number highlighted in yellow, available until stock is depleted.
150474*630RF^ 0.4700 0.591 1.299 0.031 15.0 33.0 0.8 Replacement part number with “BB” case size.
150564*630TF^ 0.5600 0.610 1.299 0.031 15.5 33.0 0.8
150684*630WF^ 0.6800 0.689 1.299 0.031 17.5 33.0 0.8
150824*630XF^ 0.8200 0.728 1.299 0.031 18.5 33.0 0.8
150105*630YF^ 1.0000 0.807 1.299 0.031 20.5 33.0 0.8
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and data (collectively, the
“Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, conrm-
ing and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order
at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without
any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain
applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”)
has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended
to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specically and ex-
pressly disclaims any guarantee, warranty or representation concerning the suitability for a specic customer application, use,
storage, transportation, or operating environment. The Information is intended for use only by customers who have the requi-
site experience and capability to determine the correct products for their application. Any technical advice inferred from this
Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis
(unless otherwise specied by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given
or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the
design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other
safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to
ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all
product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are
indicated in such warnings, cautions and notes, or that other safety measures may not be required.
