VUO 60 IdAV = 72 A VRRM = 1200-1800 V Three Phase Rectifier Bridge VRSM VRRM V V 1300 1500 1700 1900 1200 1400 1600 1800 + + Type VUO 60-12NO3 VUO 60-14NO3 VUO 60-16NO3 VUO 60-18NO3* + ~ ~~ ~ ~ ~ - - - * delivery time on request Symbol Test Conditions IdAV IdAVM TC = 85C, module module IFSM TVJ = 45C; VR = 0 Maximum Ratings Features Package with DCB ceramic base plate Isolation voltage 3600 V~ Planar passivated chips Blocking voltage up to 1800 V Low forward voltage drop 1/4" fast-on terminals UL registered E 72873 I2t 72 75 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 600 650 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 540 600 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1800 1770 A2s A2s 1460 1510 2 As A2s -40...+125 125 -40...+125 C C C 3000 3600 V~ V~ 2-2.5 18-22 50 Nm lb.in. g TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine VISOL 50/60 Hz, RMS IISOL 1 mA t = 1 min t=1s Md Mounting torque (M5) (10-32 UNF) Weight typ. Symbol Test Conditions IR VR = VRRM; VR = VRRM; TVJ = 25C TVJ = TVJM 0.3 5 mA mA VF IF TVJ = 25C 1.9 V VT0 rT For power-loss calculations only 0.8 6.5 V mW RthJC per diode, DC current per module per diode, DC current per module 1.2 0.2 1.6 0.27 K/W K/W K/W K/W 10 9.4 50 mm mm m/s2 RthJH dS dA a Applications Supplies for DC power equipment Input rectifiers for PWM inverter Battery DC power supplies Rectifier for DC motors field current Advantages Easy to mount with two screws Space and weight savings Improved temperature and power cycling Dimensions in mm (1 mm = 0.0394") Characteristic Values Creep distance on surface Strike distance in air Max. allowable acceleration Data according to IEC 60747 and refer to a single diode unless otherwise stated. for resistive load at bridge output IXYS reserves the right to change limits, test conditions and dimensions. (c) 2000 IXYS All rights reserved TVJ TVJM Tstg = 150 A; Use output terminals in parallel connection! 1-2 VUO 60 80 600 A 70 A 500 IFSM IF 60 104 50Hz, 80% VRRM A2s VR = 0 V 2 It TVJ = 45C 400 50 TVJ = 45C 40 103 300 TVJ = 125C 30 TVJ=125C TVJ= 25C 200 20 TVJ = 125C 100 10 0 0.0 0.5 102 0 0.001 V 1.5 1.0 VF 0.01 0.1 1 s 1 2 3 t Fig. 4 Forward current versus voltage drop per diode Fig. 6 I2t versus time per diode Fig. 5 Surge overload current 80 A 70 250 W RthHA : 200 0.2 0.5 1.0 1.5 2.0 3.0 5.0 Ptot 150 100 4 5 6 7 ms 8 910 t K/W K/W K/W K/W K/W K/W K/W 60 Id(AV)M 50 40 30 20 50 10 0 0 0 10 20 30 40 50 60 70 A 0 20 Id(AV)M 40 60 80 100 120 C 0 20 40 60 Tamb Fig. 7 Power dissipation versus direct output current and ambient temperature 80 100 120 C TC Fig. 8 Max. forward current versus case temperature 1.8 K/W 1.6 1.4 ZthJH 1.2 1.0 Constants for ZthJH calculation: 0.8 i 0.6 1 2 3 4 0.4 0.2 0.0 0.001 0.01 0.1 1 ti (s) 0.883 0.098 0.202 0.417 0.102 0.103 0.492 0.62 100 t 706 Fig. 9 Transient thermal impedance junction to heatsink s 10 Rthi (K/W) (c) 2000 IXYS All rights reserved 2-2