GBU4005 thru GBU410 Glass Passivated Single-Phase Bridge Rectifiers Voltage Range 50 to 1000 Volts Forward Current 4.0 Amperes Features Surge overload rating - 150 Amperes peak Ideal for printed circuit boards Reliable low cost construction utilizing molded plastic technique Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Mounting Position: Any Maximum Ratings and Electrical Characteristics Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols GBU4005 GBU401 GBU402 GBU404 GBU406 GBU408 GBU410 Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward (with heatsink Note 2) rectified output current @TC=100oC (without heatsink) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Max. instantaneous forward voltage drop at 2.0A DC Maximum DC reverse current at rated DC blocking voltage per element @TJ=25oC @TJ=125oC IF(AV) 4.0 2.4 Amps IFSM 150.0 Amps VF 1.0 Volt IR 5.0 500.0 uA Rating for fusing (t<8.3ms) 2 It 93 A se c Typical junction capacitance per element (Note 1) CJ 45 pF RJC 2.2 TJ -55 to +150 o C TSTG -55 to +150 o C Typical thermal resistance (Note 2) Operating temperature range Storage temperature range Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC 2. Device mounted on 50mm x 50mm x 1.6mm Cu plate heatsink 626 2 o C/W RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 627