222241901003 - BC Components - Datasheet.Support

1999 Apr 29 612

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

MKP RADIAL POTTED TYPE PITCH 5/10 mm

Fig.1 Simplified outlines.

handbook, full pagewidth

CBA141

FEATURES

•5 and 10 mm lead pitch

•Supplied loose in box, in

ammopack and taped on reel.

APPLICATIONS

•Low losses due to low contact

resistance and low loss dielectric

result in applications where high

frequency occur or high stability is

preferred

•Their small dimensions make them

suitable for circuits with high

packaging density.

DETAIL SPECIFICATION

For more detailed data and test

requirements see

“Type detail

specification HQN-384-16/101”

QUICK REFERENCE DATA

DESCRIPTION VALUE

Capacitance range (E24 series) 0.0015 to 0.27 µF

Capacitance tolerance ±2%; ±5%

Rated (DC) voltage 63 V; 160 V; 250 V; 400 V; 630 V

Rated (AC) voltage 25 V; 63 V;100 V; 125 V; 160 V

Rated peak-to-peak voltage 70 V; 180 V; 280 V; 350 V; 450 V

Climatic category 55/085/56

Rated temperature (DC) 85 °C

Rated temperature (AC) 85 °C

Maximum application temperature 85 °C

Reference speciﬁcation IEC 60384-16

Performance grade grade 1 (long life)

Stability grade grade 1

1999 Apr 29 613

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

COMPOSITION OF CATALOGUE NUMBER

TYPE AND VOLTAGES

416 63 V

417 160 V

418 250 V

419 400 V

420 630 V

PACKAGING LEAD CONFIGURATION C-TOL

Ammopack H = 18.5 mm ±5% 0

±2% 1

Loose in box lead length 4.0 +1.0/−0.5 mm ±5% 3

±2% 4

MULTIPLIER

(nF)

0.01 2

0.1 3

CAPACITANCE

(numerically)

Example:

1004 =100 ×1=100 nF

2222 XXX X XXX X

1999 Apr 29 614

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416

MKP 416 GENERAL DATA PITCH 5/10 mm

Speciﬁc reference data for the 63 V DC capacitors

Available 63 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.11 µF≤5×10−4≤25 ×10−4

0.11 µF<C≤0.18 µF≤10 ×10−4≤30 ×10−4

0.18 µF<C≤0.27 µF≤10 ×10−4≤35 ×10−4

Rated voltage pulse slope (dU/dt)R at 63 V (DC):

P=5mm 50 V/µs

P=10 mm 20 V/µs

R between leads at 50 V; 1 minute >100000 MΩ

R between interconnected leads and case at 50 V; 1 minute >100000 MΩ

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 100 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Ammopack H =18.5 mm; note 2 ±5% 2222 416 0.... on request

±2% 2222 416 1.... preferred

Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 416 3.... on request

±2% 2222 416 4.... on request

Fig.3 Outline.

handbook, full pagewidth

∅dt

CBA112

1999 Apr 29 615

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416

URdc =63 V; URac =25 V/Up-p =70 V

Notes

1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a

tolerance of ±2%). The specifications of these intermediate values are usually equal to the specifications of the next

higher value of the E24 series.

2. The shading indicates preferred types.

C(1)

(E24)

(µF)

DIMENSIONS

b×h×l

(mm)

MASS

(g)

CATALOGUE NUMBER(2)

AMMOPACK

H=18.5 mm

C-tol =±2%

Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm

0.036

4.5 ×9.0 ×7.2 0.45

2222 416 13603

0.039 2222 416 13903

0.043 2222 416 14303

0.047 2222 416 14703

0.051

6.0 ×11.0 ×7.2 0.60

2222 416 15103

0.056 2222 416 15603

0.062 2222 416 16203

0.068 2222 416 16803

0.075 2222 416 17503

0.082 2222 416 18203

0.091 2222 416 19103

0.1 2222 416 11004

0.11 2222 416 11104

0.12 2222 416 11204

Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm

0.13 5.0 ×11.0 ×12.5 0.85 2222 416 11304

0.15 2222 416 11504

0.16

6.0 ×12.0 ×12.5 1.10

2222 416 11604

0.18 2222 416 11804

0.20 2222 416 12004

0.22 2222 416 12204

0.24 2222 416 12404

0.27 2222 416 12704

1999 Apr 29 616

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 417

MKP 417 GENERAL DATA PITCH 5/10 mm

Speciﬁc reference data for the 160 V DC capacitors

Available 160 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.027 µF≤5×10−4≤15 ×10−4

0.027 µF<C≤0.075 µF≤5×10−4≤20 ×10−4

0.075 µF<C≤0.11 µF≤5×10−4≤25 ×10−4

0.11 µF<C≤0.18 µF≤10 ×10−4≤30 ×10−4

0.18 µF<C≤0.24 µF≤10 ×10−4≤35 ×10−4

Rated voltage pulse slope (dU/dt)R at 160 V (DC):

P=5mm 50 V/µs

P=10 mm 20 V/µs

R between leads at 100 V; 1 minute >100000 MΩ

R between interconnected leads and case at 100 V; 1 minute >100000 MΩ

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 260 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Ammopack H =18.5 mm; note 2 ±5% 2222 417 0.... on request

±2% 2222 417 1.... preferred

Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 417 3.... on request

±2% 2222 417 4.... on request

Fig.4 Outline.

dbook, full pagewidth

∅dt

CBA112

1999 Apr 29 617

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 417

URdc =160 V; URac =63 V/Up-p =180 V

Notes

1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a

tolerance of ±2%). The specifications of these intermediate values are usually equal to the specifications of the next

higher value of the E24 series.

2. The shading indicates preferred types.

C(1)

(E24)

(µF)

DIMENSIONS

b×h×l

(mm)

MASS

(g)

CATALOGUE NUMBER(2)

AMMOPACK

H=18.5 mm

C-tol =±2%

Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm

0.024

4.5 ×9.0 ×7.2 0.45

2222 417 12403

0.027 2222 417 12703

0.03 2222 417 13003

0.033 2222 417 13303

0.036

6.0 ×11.0 ×7.2 0.60

2222 417 13603

0.039 2222 417 13903

0.043 2222 417 14303

0.047 2222 417 14703

0.051 2222 417 15103

0.056 2222 417 15603

0.062 2222 417 16203

0.068 2222 417 16803

Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm

0.075

4.0 ×10.0 ×12.5 0.60

2222 417 17503

0.082 2222 417 18203

0.091 2222 417 19103

0.1 2222 417 11004

0.11

5.0 ×11.0 ×12.5 0.85

2222 417 11104

0.12 2222 417 11204

0.13 2222 417 11304

0.15 2222 417 11504

0.16

6.0 ×12.0 ×12.5 1.10

2222 417 11604

0.18 2222 417 11804

0.20 2222 417 12004

0.22 2222 417 12204

0.24 2222 417 12404

1999 Apr 29 618

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 418

MKP 418 GENERAL DATA PITCH 5/10 mm

Speciﬁc reference data for the 250 V DC capacitors

Available 250 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.027 µF≤5×10−4≤15 ×10−4

0.027 µF<C≤0.075 µF≤5×10−4≤20 ×10−4

0.075 µF<C≤0.11 µF≤5×10−4≤25 ×10−4

0.11 µF<C≤0.13 µF≤10 ×10−4≤30 ×10−4

Rated voltage pulse slope (dU/dt)R at 250 V (DC):

P=5mm 50 V/µs

P=10 mm 20 V/µs

R between leads at 100 V; 1 minute >100000 MΩ

R between interconnected leads and case at 100 V; 1 minute >100000 MΩ

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Ammopack H =18.5 mm; note 2 ±5% 2222 418 0..... on request

±2% 2222 418 1..... preferred

Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 418 3..... on request

±2% 2222 418 4..... on request

Fig.5 Outline.

handbook, full pagewidth

∅dt

CBA112

1999 Apr 29 619

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 418

URdc =250 V; URac =100 V/Up-p =280 V

Notes

1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a

tolerance of ±2%). The specifications of these intermediate values are usually equal to the specifications of the next

higher value of the E24 series.

2. The shading indicates preferred types.

C(1)

(E24)

(µF)

DIMENSIONS

b×h×l

(mm)

MASS

(g)

CATALOGUE NUMBER(2)

AMMOPACK

H=18.5 mm

C-tol =±2%

Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm

0.01

3.5 ×8.0 ×7.2 0.35

2222 418 11003

0.011 2222 418 11103

0.012 2222 418 11203

0.013 2222 418 11303

0.015 2222 418 11503

0.016

4.5 ×9.0 ×7.2 0.45

2222 418 11603

0.018 2222 418 11803

0.02 2222 418 12003

0.022 2222 418 12203

0.024 2222 418 12403

0.027

6.0 ×11.0 ×7.2 0.60

2222 418 12703

0.03 2222 418 13003

0.033 2222 418 13303

0.036 2222 418 13603

0.039 2222 418 13903

0.043 2222 418 14303

Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm

0.047

4.0 ×10.0 ×12.5 0.60

2222 418 14703

0.051 2222 418 15103

0.056 2222 418 15603

0.062 2222 418 16203

0.068 2222 418 16803

0.075 5.0 ×11.0 ×12.5 0.85 2222 418 17503

0.082 2222 418 18203

0.091 2222 418 19103

0.1

6.0 ×12.0 ×12.5 1.10

2222 418 11004

0.11 2222 418 11104

0.12 2222 418 11204

0.13 2222 418 11304

1999 Apr 29 620

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 419

MKP 419 GENERAL DATA PITCH 5 mm

Speciﬁc reference data for the 400 V DC capacitors

Available 400 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.0091 µF≤5×10−4≤10 ×10−4

0.0091 µF<C≤0.02 µF≤5×10−4≤15 ×10−4

Rated voltage pulse slope (dU/dt)R at 400 V (DC) 50 V/µs

R between leads at 100 V; 1 minute >100000 MΩ

R between interconnected leads and case at 100 V; 1 minute >100000 MΩ

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Ammopack H =18.5 mm; note 2 ±5% 2222 419 0..... on request

±2% 2222 419 1..... preferred

Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 419 3..... on request

±2% 2222 419 4..... on request

Fig.6 Outline.

handbook, full pagewidth

∅dt

CBA112

1999 Apr 29 621

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 419

URdc =400 V; URac =125 V/Up-p =350 V

Notes

1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a

tolerance of ±2%). The specifications of these intermediate values are usually equal to the specifications of the next

higher value of the E24 series.

2. The shading indicates preferred types.

C(1)

(E 24)

(µF)

DIMENSIONS

b×h×l

(mm)

MASS

(g)

CATALOGUE NUMBER(2)

AMMOPACK

H=18.5 mm

C-tol =±2%

Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm

0.0015

3.5 ×8.0 ×7.2 0.35

2222 419 11502

0.0016 2222 419 11602

0.0018 2222 419 11802

0.002 2222 419 12002

0.0022 2222 419 12202

0.0024 2222 419 12402

0.0027 2222 419 12702

0.003 2222 419 13002

0.0033 2222 419 13302

0.0036 2222 419 13602

0.0039 2222 419 13902

0.0043

4.5 ×9.0 ×7.2 0.45

2222 419 14302

0.0047 2222 419 14702

0.0051 2222 419 15102

0.0056 2222 419 15602

0.0062 2222 419 16202

0.0068 2222 419 16802

0.0075 2222 419 17502

0.0082 2222 419 18202

0.0091 2222 419 19102

0.01 2222 419 11003

0.011 2222 419 11103

0.012 2222 419 11203

0.013

6.0 ×11.0 ×7.2 0.60

2222 419 11303

0.015 2222 419 11503

0.016 2222 419 11603

0.018 2222 419 11803

0.02 2222 419 12003

1999 Apr 29 622

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 419

MKP 419 GENERAL DATA PITCH 10 mm

Speciﬁc reference data for the 400 V DC capacitors

Available 400 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.027 µF≤5×10−4≤15 ×10−4

0.027 µF<C≤0.068 µF≤5×10−4≤20 ×10−4

Rated voltage pulse slope (dU/dt)R at 400 V (DC) 20 V/µs

R between leads at 100 V; 1 minute >100000 MΩ

R between interconnected leads and case at 100 V; 1 minute >100000 MΩ

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Ammopack H =18.5 mm; note 2 ±5% 2222 419 0..... on request

±2% 2222 419 1..... preferred

Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 419 3..... on request

±2% 2222 419 4..... on request

Fig.7 Outline.

handbook, full pagewidth

∅dt

CBA112

1999 Apr 29 623

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 419

URdc =400 V; URac =125 V/Up-p =350 V

Notes

1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a

tolerance of ±2%). The specifications of these intermediate values are usually equal to the specifications of the next

higher value of the E24 series.

2. The shading indicates preferred types.

C(1)

(E24)

(µF)

DIMENSIONS

b×h×l

(mm)

MASS

(g)

CATALOGUE NUMBER(2)

AMMOPACK

H=18.5 mm

C-tol =±2%

Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm

0.022

4.0 ×10.0 ×12.5 0.60

2222 419 12203

0.024 2222 419 12403

0.027 2222 419 12703

0.03 2222 419 13003

0.033 2222 419 13303

0.036 5.0 ×11.0 ×12.5 0.85 2222 419 13603

0.039 2222 419 13903

0.043 2222 419 14303

0.047

6.0 ×12.0 ×12.5 1.10

2222 419 14703

0.051 2222 419 15103

0.056 2222 419 15603

0.062 2222 419 16203

0.068 2222 419 16803

1999 Apr 29 624

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 420

MKP 420 GENERAL DATA PITCH 5 mm

Speciﬁc reference data for the 630 V DC capacitors

Available 630 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.0068 µF≤5×10−4≤10 ×10−4

Rated voltage pulse slope (dU/dt)R at 630 V (DC) 50 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case at 500 V; 1 minute >100000 MΩ

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1000 V; 1 minute

Withstanding (DC) voltage between leads and case 1260 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Ammopack H =18.5 mm; note 2 ±5% 2222 420 0..... on request

±2% 2222 420 1..... preferred

Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 420 3..... on request

±2% 2222 420 4..... on request

Fig.8 Outline.

handbook, full pagewidth

∅dt

CBA112

1999 Apr 29 625

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 420

URdc =630 V; URac =160 V/Up-p =450 V

Notes

1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a

tolerance of ±2%). The specifications of these intermediate values are usually equal to the specifications of the next

higher value of the E24 series.

2. The shading indicates preferred types.

C(1)

(E24)

(µF)

DIMENSIONS

b×h×l

(mm)

MASS

(g)

CATALOGUE NUMBER(2)

AMMOPACK

H=18.5 mm

C-tol =±2%

Pitch =5.0 ±0.3 mm; dt=0.50 ±0.05 mm

0.0015

3.5 ×8.0 ×7.2 0.35

2222 420 11502

0.0016 2222 420 11602

0.0018 2222 420 11802

0.002 2222 420 12002

0.0022 2222 420 12202

0.0024 2222 420 12402

0.0027 2222 420 12702

0.003

4.5 ×9.0 ×7.2 0.45

2222 420 13002

0.0033 2222 420 13302

0.0036 2222 420 13602

0.0039 2222 420 13902

0.0043

6.0 ×11.0 ×7.2 0.60

2222 420 14302

0.0047 2222 420 14702

0.0051 2222 420 15102

0.0056 2222 420 15602

0.0062 2222 420 16202

0.0068 2222 420 16802

1999 Apr 29 626

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 420

MKP 420 GENERAL DATA PITCH 10 mm

Speciﬁc reference data for the 630 V DC capacitors

Available 630 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.027 µF≤5×10−4≤15 ×10−4

0.027 µF<C≤0.047 µF≤5×10−4≤20 ×10−4

Rated voltage pulse slope (dU/dt)R at 630 V (DC) 50 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case at 500 V; 1 minute >100000 MΩ

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1000 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Ammopack H =18.5 mm; note 2 ±5% 2222 420 0..... on request

±2% 2222 420 1..... preferred

Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 420 3..... on request

±2% 2222 420 4..... on request

Fig.9 Outline.

handbook, full pagewidth

∅dt

CBA112

1999 Apr 29 627

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 420

URdc =630 V; URac =160 V/Up-p =450 V

Notes

1. In addition to the values of the E24 series as quoted, intermediate values are available of the E96 series (with a

tolerance of ±2%). The specifications of these intermediate values are usually equal to the specifications of the next

higher value of the E24 series.

2. The shading indicates preferred types.

C(1)

(E24)

(µF)

DIMENSIONS

b×h×l

(mm)

MASS

(g)

CATALOGUE NUMBER(2)

AMMOPACK

H=18.5 mm

C-tol =±2%

Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm

0.01

4.0 ×10.0 ×12.5 0.60

2222 420 11003

0.011 2222 420 11103

0.012 2222 420 11203

0.013 2222 420 11303

0.015 2222 420 11503

0.016 2222 420 11603

0.018

5.0 ×11.0 ×12.5 0.85

2222 420 11803

0.02 2222 420 12003

0.022 2222 420 12203

0.024 2222 420 12403

0.027

6.0 ×12.0 ×12.5 1.10

2222 420 12703

0.03 2222 420 13003

0.033 2222 420 13303

0.036 2222 420 13603

0.039 2222 420 13903

0.043 2222 420 14303

0.047 2222 420 14703

1999 Apr 29 628

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

CONSTRUCTION

Description

•Low-inductive wound cell of metallized polypropylene

(PP) film, potted with epoxy resin in a flame-retardant

case

•Radial leads, solder-coated

•Solder-plated copper-clad steel wire to ensure good

resistance to soldering heat

•Small stand-off pips allow removal of solder flux etc.

during cleaning of the printed-circuit board.

Mounting

NORMAL USE

The capacitors are designed for printed-circuit board

applications. The capacitors packed in bandoliers are

designed for mounting on printed-circuit boards by means

of automatic insertion machines. For detailed

specifications refer to this handbook, chapter

“Packaging

information”

Fig.10 Construction.

handbook, halfpage

connecting wire

CBA333

metal spray layer

MKP metallized polypropylene film

SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION

AND SHOCK

In order to withstand vibration and shock tests, it must be

ensured that the stand-off pips are in good contact with the

printed-circuit board.

The capacitors shall be mechanically fixed by the leads.

SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD

The maximum length and width of film capacitors is shown

in Fig.11:

•Eccentricity as in Fig.11. The maximum eccentricity is

smaller than or equal to the lead diameter of the product

concerned.

•Product height with seating plane as given by

“IEC 60717”

as reference: hmax ≤h+0.3 mm.

Storage temperature

•Storage temperature: Tstg =−25 to +40 °C with RH

maximum 80% without condensation.

RATINGS AND CHARACTERISTICS REFERENCE

CONDITIONS

Unless otherwise specified, all electrical values apply at an

ambient free air temperature of 23 ±1°C, an atmospheric

pressure of 86 to 106 kPa and a relative humidity of

50 ±2%.

For reference testing, a conditioning period shall be

applied over 96 ±4 hours by heating the products in a

circulating air oven at the rated temperature and a relative

humidity not exceeding 20%.

Fig.11 Lay-out.

handbook, halfpage

bmax =

b + 0.3 mm

lmax =

l + 0.3 mm

CBA116

eccentricity

1999 Apr 29 629

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

CHARACTERISTICS

Capacitance

Impedance

Fig.12 Capacitance change at 1 kHz as a function of temperature.

handbook, full pagewidth

CBA901

−3−40 0 40 80

−2

−1

Tamb (°C)

∆C

(%)

typical

max.

min.

Fig.13 Impedance as a function of frequency; typical curves.

handbook, full pagewidth

CBA485

104105106107108

102

10−3

10−2

10−1

f (Hz)

Impedance

(Ω)

100 nF

10 nF

1999 Apr 29 630

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

Maximum RMS voltage (sinewave) as a function of frequency

Fig.14 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =63 V.

handbook, full pagewidth

AC voltage

(V)

f (Hz)

CBA593

103104105106107

102

47 nF

100 nF

220 nF

Fig.15 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =160 V.

handbook, full pagewidth

AC voltage

(V)

f (Hz)

CBA594

103104105106107

102

47 nF

24 nF

100 nF

220 nF

1999 Apr 29 631

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

Fig.16 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =250 V.

handbook, full pagewidth

AC voltage

(V)

f (Hz)

CBA595

103104105106107

103

102

22 nF

47 nF

100 nF

Fig.17 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =400 V.

handbook, full pagewidth

AC voltage

(V)

f (Hz)

CBA596

103104105106107

103

102

47 nF

22 nF

10 nF

4.7 nF

2.2 nF

1999 Apr 29 632

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

Maximum RMS current (sinewave) as a function of frequency

The maximum RMS current is defined by .

Uac is the maximum AC voltage depending on the ambient temperature in Figs 14 to 18.

Fig.18 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =630 V.

handbook, full pagewidth

AC voltage

(V)

f (Hz)

CBA597

103104105106107

103

102

10 nF

22 nF

47 nF

Iac ωCU

××=

1999 Apr 29 633

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

Tangent of loss angle

Insulation resistance

Fig.19 Tangent of loss angle as a function of frequency; typical curve.

handbook, full pagewidth

CBA506

103104105106

0.1

dissipation

factor

(× 10−4)

f (Hz)

Fig.20 RC product as a function of ambient temperature; typical curve.

handbook, full pagewidth

CBA204

020406080100

106

104

105

(s)

Tamb (°C)

1999 Apr 29 634

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)

Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C

Table 1 Heat conductivity

Power dissipation and maximum component temperature rise

The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a

function of the free air ambient temperature.

Power dissipation can be calculated in accordance with chapter

“Introduction”

, section

“Maximum power dissipation”

The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more

details) or calculated by :

•∆T=component temperature rise (°C).

•P=power dissipation of the component (mW).

•G=heat conductivity of the component (mW/°C).

bmax

(mm) PITCH (mm)

51015

3.5 3.0 −−

4.0 −6.5 −

4.5 4.0 −−

5.0 −7.5 10

6.0 5.5 9.0 11

7.0 −−12

8.5 −−16

10.0 −−18

Fig.21 Maximum allowed component temperature rise as a function of the ambient temperature.

handbook, full pagewidth

CBA850

−60 −20 80

−40 0 20 60 100

Tamb (°C)

∆T

(°C)

∆TPG⁄=

1999 Apr 29 635

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

Measuring the component temperature

A thermocouple must be attached to the capacitor body; see Fig.22.

The temperature is measured in unloaded (Tamb) and maximum loaded

condition (Tc).

The temperature rise is given by .

To avoid radiation or convection, the capacitor should be tested in a wind-free

box.

Fig.22 Mounting the thermocouple.

handbook, halfpage

thermocouple

CBA758

∆TT

amb

–=

1999 Apr 29 636

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

Application note and limiting conditions

These capacitors are not suitable for mains applications as across-the-line capacitors without additional

protection, as described hereunder. These mains applications are strictly regulated by safety standards and

therefore electromagnetic interference suppression capacitors conforming to the standards must be used.

To select the capacitor for a certain application, the following conditions must be checked:

1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).

2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p.

3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and

without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied

by URdc and divided by the applied voltage.

For all other pulses following equation must be fulfilled:

T is the pulse duration.

4. The maximum component surface temperature rise must be lower than the limits in Fig.21.

5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a

capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to

100 times the values mentioned in Table 1 “Heat conductivity”.

6. When using these capacitors in the input filters or as series connected with an impedance to the mains the applicant

must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains or line

card supply included).

VOLTAGE CONDITIONS FOR 6ABOVE

Example

C=0.1 µF - 250 V used for the sine voltage signal of 2 VRMS at 1 MHz superimposed on 160 V (DC).

The ambient temperature is 50 °C. The circuit is high ohmic during a capacitor breakdown.

Checking the conditions:

1. The peak voltage Up=162.8 V is lower than 250 V (DC).

2. The peak-to-peak voltage 5.6 V is lower than .

3. The signal is not pulsed.

4. This is a sinewave, according the curves in, the capacitor can be applied.

5. Not applicable.

6. Not applicable.

ALLOWED VOLTAGES T amb ≤85 °C

Maximum continuous RMS voltage URac

Maximum temporary RMS -overvoltage (<24 hours) 1.25 ×URac

Maximum peak voltage (Vo-p) (<2 s) 1.6 ×URdc

2dU

--------





∫dt×× URdc dU

--------





rated

×<

2 2 100 V (AC)×× 280 Upp–

1999 Apr 29 637

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

MARKING

Product marking

CAPACITORS WITH PITCH =5mm

The capacitors are marked by YAG laser on the side

(see Fig.23) with the following information:

1. Capacitance code in accordance with

“IEC 60062”

: n =nF

2. Tolerance on rated capacitance: G =±2%; J =±5%

3. Rated (DC) voltage (e.g. 250 V)

4. Code for manufacturer

5. Year and week of manufacture (e.g. 9801)

6. Manufacturers type designation.

Fig.23 Example of marking for a capacitor

with pitch =5 mm.

handbook, halfpage

27n G

250V PH

9801 418

FRONT FACE

CBA686

CAPACITORS WITH PITCH =10 mm

The capacitors are marked by laser print on the front face

(see Fig.24) with the following information:

1. Year and week of manufacture (e.g. 9802)

2. Capacitance code in accordance with “

IEC 60062”

Tolerance on rated capacitance: G =±2%; J =±5%

Rated (DC) voltage (e.g. 160 V)

3. Code for dielectric material (MKP)

Manufacturer’s type designation (e.g. 417)

4. Code for factory of origin (HQ)

Code for manufacturer. Fig.24 Example of marking for a capacitor

with pitch =10 mm.

handbook, halfpage

FRONT FACE

CBA687

9912

100n G 160V

MKP 417

PH-HQ

1999 Apr 29 638

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

Package marking

The package containing the capacitors is marked as shown in Fig.25.

handbook, full pagewidth

CCB844

10.

Fig.25 Barcode label.

Barcode label marking

LINE MARKING EXPLANATION

1 Manufacturer's name

2 Country of origin

3 Sub-family

4 Type description

5 Capacitance value in µF, tolerance, voltage

and climatic category (

“IEC 60068-1”

)

6−

7 Preference origin code: A

Country of origin in code: 170 (Belgium)

Responsible production centre: HQ

Work order: WO

Wage number of ﬁnal inspection

8 Product type description

9 Quantity and production period, year and

week code

10 Product code (12NC)

Please note:

In due time BC COMPONENTS

will replace PHILIPS COMPONENTS

1999 Apr 29 639

BC Components Product speciﬁcation

Metallized polypropylene ﬁlter capacitors MKP 416 to 420

QUICK REFERENCE TEST REQUIREMENTS (see note 1)

Note

1. For detailed information, see

“Type detail specification HQN-384-16/101”

TEST PROCEDURE

(quick reference) REQUIREMENTS

Robustness of leads

Tensile strength:

“IEC 60068-2-21”

load 10 N; 10 s no visible damage

legible marking

∆C/C≤1% +5pF

∆tan δ≤5×10−4

Bending:

“IEC 60068-2-21”

load 5 N; 4 ×90°

Resistance to soldering heat

“IEC 60068-2-20”

solder bath: 260 °C; 5 s

Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes

Robustness of component

Vibration:

“IEC 60068-2-6”

10 to 55 Hz; amplitude 0.75 mm or

acceleration 98 m/s2; 6 hours ∆C/C≤1% +5pF

∆tan δ≤5×10−4

Shock:

“IEC 60068-2-27”

half sinewave; 490 m/s2; 11 ms

Climatic sequence

Dry heat:

“IEC 60068-2-2”

16 hours; 85 °C

∆C/C≤1% +5pF

∆tan δ≤5×10−4

Rins ≥50% of speciﬁed value

Damp heat, cyclic, test Db, ﬁrst cycle:

“IEC 60068-2-30”

Cold:

“IEC 60068-2-1“

2 hours; −55 °C

Damp heat, cyclic, test Db,

remaining cycles:

“IEC 60068-2-30”

Other applicable tests

Damp heat, steady state:

“IEC 60068-2-3”

56 days; 40 °C; 90 to 95% RH ∆C/C≤1% +5pF

∆tan δ≤5×10−4

Rins ≥50% of speciﬁed value

Endurance (DC):

“IEC 60384-16”

2000 hours: 1.25 ×URdc; 85 °C∆C/C≤1% +5pF

∆tan δ≤5×10−4

Rins ≥50% of speciﬁed value

Heat storage:

“IEC 60384-16“

2000 hours; 85 °C∆C/C≤1% +5pF

∆tan δ≤5×10−4

Resistance to soldering heat with

preheating:

“IEC 60384-16“

body temperature: 85 °C;

bath temperature: 260 °C;

dwell time: 10 s

∆C/C≤1% +5pF

∆tan δ≤5×10−4

Passive ﬂammability:

“IEC 60384-1”

class C no burning

Endurance (AC):

“IEC 60384-16”

1000 hours: 85 °C

1.25 ×URac (RMS); 50 Hz ∆C/C≤2% +5pF

∆tan δ≤5×10−4

Rins ≥50% of speciﬁed value