Original Creation Date: 07/26/95
Last Update Date: 07/26/95
Last Major Revision Date: 07/26/95
MNLM144-X REV 0AL MILITARY DATA SHEET
HIGH VOLTAGE, HIGH SLEW RATE OPERATIONAL AMPLIFIER
NS Part Numbers
LM143H/883
Industry Part Number
LM143
Prime Die
LM143
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
Subgrp Description Temp ( C)
o
1 Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
1
MNLM144-X REV 0AL MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = +28V, Rs = 0 Ohms, Rl = 5K Ohms
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Icc Supply Current 4mA1
Vio Input Offset
Voltage Vcm = -24V 3 -5 5 mV 1
3 -6 6 mV 2, 3
Vcm = +24V 3 -5 5 mV 1
3 -6 6 mV 2, 3
Vcm = 0V 3 -5 5 mV 1
3 -6 6 mV 2, 3
Vcm = -24V, Rs = 50K Ohms 3 -5 5 mV 1
3 -6 6 mV 2, 3
Vcm = +24V, Rs = 50K Ohms 3 -5 5 mV 1
3 -6 6 mV 2, 3
Iio Input Offset
Current Vcm = -24V 3, 4 -3 3 nA 1
3, 4 -4.5 4.5 nA 2
3, 4 -7 7 nA 3
Vcm = +24V 3, 4 -3 3 nA 1
3, 4 -4.5 4.5 nA 2
3, 4 -7 7 nA 3
Vcm = 0V 3, 4 -3 3 nA 1
3, 4 -4.5 4.5 nA 2
3, 4 -7 7 nA 3
+Iib Input Bias
Current Vcm = -24V 3, 4 20 nA 1
3, 4 35 nA 2, 3
Vcm = +24V 3, 4 20 nA 1
3, 4 35 nA 2, 3
Vcm = 0V 3, 4 20 nA 1
3, 4 35 nA 2, 3
2
MNLM144-X REV 0AL MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = +28V, Rs = 0 Ohms, Rl = 5K Ohms
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
-Iib Input Bias
Current Vcm = -24V 3, 4 20 nA 1
3, 4 35 nA 2, 3
Vcm = +24V 3, 4 20 nA 1
3, 4 35 nA 2, 3
Vcm = 0V 3, 4 20 nA 1
3, 4 35 nA 2, 3
CMRR Common Mode
Rejection Ratio -24V < Vcm < 26V 5 80 dB 1, 2,
3
PSRR Power Supply
Rejection Ratio Vcc = +28V to +15V 5 80 dB 1, 2,
3
+Avs Open Loop Voltage
Gain Rl = 100K Ohms, Vout = 0V to 10V 6 100 V/mV 1
6 50 V/mV 2, 3
-Avs Open Loop Voltage
Gain Rl = 100K Ohms, Vout = 0V to -10V 6 100 V/mV 1
6 50 V/mV 2, 3
+Vout Output Voltage
Swing Rl = 5K Ohms 22 V 1, 2,
3
-Vout Output Voltage
Swing Rl = 5K Ohms -22 V 1, 2,
3
Vin Input Voltage
Range 1 -24 24 V 1, 2,
3
BVcc Supply Breakdown
Voltage 2 -40 40 V 1, 2,
3
Note 1: Parameter tested go-no-go only.
Note 2: Guaranteed parameter not tested.
Note 3: Applies to Class S only, except 38510. Drift limits for the following symbols- -
VIO + 1 - IIO + 1 - +IIB/-IIB + 4 "THIS NOTE IS INVALID AND CURRENTLY BEING
UPDATED. CONTACT FACTORY."
Note 4: RS = 50k ohms or equivalent.
Note 5: 80dB = 100uV/V.
Note 6: V/mV in units column is equivalent to K in datalog.
3
