MILITARY DATA SHEET Original Creation Date: 07/26/95 Last Update Date: 07/26/95 Last Major Revision Date: 07/26/95 MNLM144-X REV 0AL HIGH VOLTAGE, HIGH SLEW RATE OPERATIONAL AMPLIFIER Industry Part Number NS Part Numbers LM143 LM143H/883 Prime Die LM143 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MNLM144-X REV 0AL Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +28V, Rs = 0 Ohms, Rl = 5K Ohms SYMBOL PARAMETER Icc Supply Current Vio Input Offset Voltage CONDITIONS NOTES Vcm = -24V Vcm = +24V Vcm = 0V Vcm = -24V, Rs = 50K Ohms Vcm = +24V, Rs = 50K Ohms Iio Input Offset Current Vcm = -24V Vcm = +24V Vcm = 0V +Iib Input Bias Current Vcm = -24V Vcm = +24V Vcm = 0V 2 PINNAME MIN MAX UNIT SUBGROUPS 4 mA 1 3 -5 5 mV 1 3 -6 6 mV 2, 3 3 -5 5 mV 1 3 -6 6 mV 2, 3 3 -5 5 mV 1 3 -6 6 mV 2, 3 3 -5 5 mV 1 3 -6 6 mV 2, 3 3 -5 5 mV 1 3 -6 6 mV 2, 3 3, 4 -3 3 nA 1 3, 4 -4.5 4.5 nA 2 3, 4 -7 7 nA 3 3, 4 -3 3 nA 1 3, 4 -4.5 4.5 nA 2 3, 4 -7 7 nA 3 3, 4 -3 3 nA 1 3, 4 -4.5 4.5 nA 2 3, 4 -7 7 nA 3 3, 4 20 nA 1 3, 4 35 nA 2, 3 3, 4 20 nA 1 3, 4 35 nA 2, 3 3, 4 20 nA 1 3, 4 35 nA 2, 3 MILITARY DATA SHEET MNLM144-X REV 0AL Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +28V, Rs = 0 Ohms, Rl = 5K Ohms SYMBOL -Iib PARAMETER Input Bias Current CONDITIONS NOTES Vcm = -24V Vcm = +24V Vcm = 0V PINNAME MIN MAX UNIT SUBGROUPS 3, 4 20 nA 1 3, 4 35 nA 2, 3 3, 4 20 nA 1 3, 4 35 nA 2, 3 3, 4 20 nA 1 3, 4 35 nA 2, 3 CMRR Common Mode Rejection Ratio -24V < Vcm < 26V 5 80 dB 1, 2, 3 PSRR Power Supply Rejection Ratio Vcc = +28V to +15V 5 80 dB 1, 2, 3 +Avs Open Loop Voltage Gain Rl = 100K Ohms, Vout = 0V to 10V 6 100 V/mV 1 6 50 V/mV 2, 3 6 100 V/mV 1 6 50 V/mV 2, 3 22 V 1, 2, 3 -22 V 1, 2, 3 -Avs Open Loop Voltage Gain Rl = 100K Ohms, Vout = 0V to -10V +Vout Output Voltage Swing Rl = 5K Ohms -Vout Output Voltage Swing Rl = 5K Ohms Vin Input Voltage Range 1 -24 24 V 1, 2, 3 BVcc Supply Breakdown Voltage 2 -40 40 V 1, 2, 3 Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Parameter tested go-no-go only. Guaranteed parameter not tested. Applies to Class S only, except 38510. Drift limits for the following symbols- VIO + 1 - IIO + 1 - +IIB/-IIB + 4 "THIS NOTE IS INVALID AND CURRENTLY BEING UPDATED. CONTACT FACTORY." RS = 50k ohms or equivalent. 80dB = 100uV/V. V/mV in units column is equivalent to K in datalog. 3