Power TOPLED Hyper-Bright LED LW E673 Vorlaufige Daten / Preliminary Data Besondere Merkmale * Gehausetyp: weies P-LCC-4 Gehause * Besonderheit des Bauteils: mehr Licht durch einen geringen thermischen Widerstand * Farbort: x = 0,32, y = 0,31 nach CIE 1931 (wei) * typische Farbtemperatur: 6500 K * Farbwiedergabeindex: 80 * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaN * optischer Wirkungsgrad: 6 lm/W * Gruppierungsparameter: Lichtstarke, Farbort * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8 mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach EOS/ESD-5.1-1993 Features * package: white P-LCC-4 package * feature of the device: more brightness due to a lower thermal resistance * color coordinates: x = 0.32, y = 0.31 acc. to CIE 1931 (white) * typ. color temperature: 6500 K * color reproduction index: 80 * viewing angle: Lambertian Emitter (120) * technology: InGaN * optical efficiency: 6 lm/W * grouping parameter: luminous intensity, color coordinates * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to EOS/ESD-5.1-1993 Anwendungen * Verkehrssignale * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innen- und Auenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung) * Ersatz von Kleinst-Gluhlampen * Leselampen * Rettungsnotleuchten * Signal- und Symbolleuchten * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Scanner Applications * traffic signals * backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) * Interior and exterior automotive lighting (e.g. dashboard backlighting) * substitution of micro incandescent lamps * reading lamps * emergency lighting * signal and symbol luminaire * marker lights (e.g. steps, exit ways, etc.) * scanners 2001-10-02 1 LW E673 Typ Emissionsfarbe Type Color of Emission LW E673-R2S2-1 LW E673-S2U1-1 white Farbe der Lichtaustrittsflache Color of the Light Emitting Area colored diffused Lichtstarke Lichtstrom Bestellnummer Luminous Intensity IF = 30 mA IV (mcd) Luminous Flux IF = 30 mA V (mlm) Ordering Code 140 ... 280 224 ... 560 610 (typ.) 1100 (typ.) Q62703-Q4862 Q62703-Q4902 Anm.: -1 Farbselektiert nach Farbortgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhaltlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: -1 Color selection acc. to Chromaticity coordinate groups (see page 5) The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. S 2001-10-02 2 LW E673 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 110 C Durchlassstrom Forward current IF 30 mA Stostrom Surge current t 10 s, D = 0.005 IFM 200 mA Sperrspannung Reverse voltage VR 5 V Leistungsaufnahme Power consumption Ptot 130 mW 300 K/W 130 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung Rth JA Junction/ambient Rth JS Sperrschicht/Lotpad Junction/solder point Montage auf PC-Board FR 4 (Padgroe 16 mm 2) mounted on PC board FR 4 (pad size 16 mm 2) 2001-10-02 3 LW E673 Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Farbkoordinate x nach CIE 1931 1) (typ.) Chromaticity coordinate x acc. to CIE 1931 IF = 30 mA x 0.32 - Farbkoordinate y nach CIE 19311) (typ.) Chromaticity coordinate y acc. to CIE 1931 IF = 30 mA y 0.31 - Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 Grad deg. Durchlassspannung 2) Forward voltage IF = 30 mA (typ.) (max.) VF VF 3.8 4.3 V V Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR 0.01 10 A A Temperaturkoeffizient von x Temperature coefficient of x IF = 30 mA; -10C T 100C (typ.) TCx -0.1 10-3/K Temperaturkoeffizient von y Temperature coefficient of y IF = 30 mA; -10C T 100C (typ.) TCy -0.2 10-3/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 30 mA; -10C T 100C (typ.) TCV - 3.0 mV/K Optischer Wirkungsgrad Optical efficiency IF = 30 mA (typ.) opt 6 lm/W 1) Farbortgruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0,01 ermittelt. Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01. 2) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. 2001-10-02 4 LW E673 Farbortgruppen Chromaticity coordinate groups 0.42 0.41 0.40 Cy 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.26 0.25 0.24 0.23 0.9 520 530 0.8 540 Cx 510 550 0.7 560 0.6 570 500 0.5 580 590 600 610 620 630 0.4 + 0.3 490 0.2 480 470 460 450 0.1 0 E 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.28 Cy group 5 + group 4 group 3 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 1) Cx OHA01327 2001-10-02 5 LW E673 Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group Lichtstarke Luminous Intensity IV (mcd) Lichtstrom Luminous Flux V (mlm) R2 S1 S2 T1 T2 U1 140 ... 180 180 ... 224 224 ... 280 280 ... 355 355 ... 450 450 ... 560 480 (typ.) 600 (typ.) 760 (typ.) 950 (typ.) 1200 (typ.) 1500 (typ.) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11%. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: R2-4 Example: R2-4 Lichtgruppe Luminous Intensity Group Halbgruppe Half Group Farbortgruppe Chromaticity Coordinate Group R 2 4 2001-10-02 6 LW E673 Relative spektrale Emission Irel = f (), TA = 25 C, IF = 30 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve OHL00609 100 I rel % 80 60 V 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik Irel = f () Radiation Characteristic 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2001-10-02 0.8 0.6 0.4 0 20 7 40 60 80 100 120 LW E673 Durchlassstrom IF = f (VF) Forward Current TA = 25 C Relative Lichtstarke IV/IV(30 mA) = f (IF) Relative Luminous Intensity TA = 25 C OHL00611 10 2 mA IF 5 OHL00670 10 1 IV I V (30 mA) 10 0 10 1 5 10 -1 10 0 10 -2 5 10 -1 2.5 2 3 3.5 4 10 -3 10 -1 4.5 V 5 10 0 10 1 mA 10 2 VF IF Maximal zulassiger Durchlassstrom IF = f (T) Max. Permissible Forward Current Maximal zulassiger Durchlassstrom IF = f (T) Max. Permissible Forward Current OHL00671 35 OHL01085 35 I F mA I F mA 30 30 MTTF 10000 h 25 25 MTTF MTTF 5000 h MTTF 10000 h 5000 h 20 20 15 15 10 10 Estimated average degradation I V = -50% 5 Estimated average degradation I V = -50% 5 TS temp. solder point TA temp. ambient 0 0 20 40 60 0 80 C 100 20 40 60 80 C 100 T T 2001-10-02 0 8 LW E673 Relative Lichtstarke IV/IV(25 C) = f (TA) Relative Luminous Intensity IF = 30 mA Farbortverschiebung x, y = f (IF) Chromaticity Coordinate Shift TA = 25 C OHL00870 1.2 0.324 IV OHL01436 x, y I V (25 C) x 0.318 0.8 0.316 0.314 0.6 0.312 0.4 y 0.310 0.308 0.2 0.306 0 -10 10 30 50 70 0.304 C 100 TA Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C LW IF A 0.25 tP D= T 10 20 40 mA 50 30 IF Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C LW OHL01407 0.30 0 OHL01408 0.30 tP IF IF A 0.25 T tP D= T tP IF T 0.20 D= 0.20 0.15 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.15 D= 0.10 0.005 0.01 0.02 0.05 0.1 0.2 0.5 0.10 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 0 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp 2001-10-02 tp 9 LW E673 Mazeichnung Package Outlines 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 2.1 (0.083) 1.7 (0.067) 2.1 (0.083) 0.8 (0.031) 0.6 (0.024) C 1.1 (0.043) C 0.1 (0.004) typ Package marking 0.5 (0.020) 3.7 (0.146) 3.3 (0.130) 3.4 (0.134) 3.0 (0.118) C 41 0.7 (0.028) (2.4 (0.094)) A 0.9 (0.035) 0.18 (0.007) 0.6 (0.024) 0.4 (0.016) 0.12 (0.005) GPLY6991 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gewicht / Approx. weight: 31 mg 2001-10-02 10 LW E673 Lotbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) OHLY0597 300 C T 250 240-245 C 10-40 s 200 183 C 120 to 180 s Ramp-down rate up to 6 K/s 150 Defined for Preconditioning: up to 6 K/s 100 Ramp-up rate up to 6 K/s 50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 t 2001-10-02 11 s 250 LW E673 Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2001-10-02 12 s 250 LW E673 Empfohlenes Lotpaddesign Recommended Solder Pad IR Reflow Loten IR Reflow Soldering 3.3 (0.130) 3.3 (0.130) 0.4 (0.016) 2.6 (0.102) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Kathoden Markierung / Cathode marking 7.5 (0.295) 0.5 (0.020) 1.5 (0.059) 4.5 (0.177) 1.1 (0.043) Cu Flache / <_ 12 mm 2 per pad Cu-area Lotstoplack Solder resist OHLPY439 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2001-10-02 13 LW E673 Wellenloten (TTW) TTW Soldering 1.5 (0.059) Empfohlenes Lotpaddesign Recommended Solder Pad 3.5 (0.138) Bewegungsrichtung der Platine PCB-direction 3.5 (0.138) 1 (0.039) 8 (0.315) 2 (0.079) 2 (0.079) 3 (0.118) 6 (0.236) 2.8 (0.110) 2 (0.079) 6.1 (0.240) 2.8 (0.110) 0.5 (0.020) 7.5 (0.295) Padgeometrie fur verbesserte Warmeableitung Cu Flache / > 12 mm 2 per pad Cu-area Paddesign for improved heat dissipation Lotstoplack Solder resist OHAY0583 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) Gurtung / Polaritat und Lage Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Method of Taping / Polarity and Orientation Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 4 (0.157) 8 (0.315) 1.75 (0.069) 2 (0.079) 3.5 (0.138) 2.9 (0.114) 4 (0.157) 3.6 (0.142) 1.5 (0.059) C C C A OHAY0536 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2001-10-02 14 LW E673 Revision History: 2001-10-02 Previous Version: 2001-02-28 Page Subjects (major changes since last revision) 4 vlaue (forward voltage) Patent List Patent No. US 6 066 861, US 6 277 301 Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2001-10-02 15