AC-Capacitors, Suppression Capacitors
Class X2 AC 275 V (Code pos. 9 = 2) (MKP)
F1778-275V
Vishay Roederstein
www.vishay.com To contact us: RFI@vishay.com Document Number: 27610
50 Revision: 29-Aug-07
Dimensions in mm
MAXIMUM PULSE RISE TIME: (du/dt) in V/µs
RATED VOLTAGE:
AC 275 V, 50/60 Hz
PERMISSIBLE DC VOLTAGE:
DC 630 V
TERMINALS:
Radial tinned copper wire
COATING:
Plastic case, epoxy resin sealed, flame retardant UL 94V-0
CLIMATIC TESTING CLASS ACC.TO EN 60068-1:
40/100/56
CAPACITANCE RANGE:
E12 series 0.01 µF X2 - 4.7 µF X2
preferred values acc. to E6
FEATURES:
Product is completely lead (Pb)-free
Produt is RoHS compliant
CAPACITANCE TOLERANCE:
Standard: ± 20 %/± 10 %
DISSIPATION FACTOR TAN δ:
< 0.1 % measured at 1 kHz
INSULATION RESISTANCE: FOR C ≤ 0.33 µF:
30 GΩ average value
15 GΩ minimum value
TIME CONSTANT FOR C > 0.33 µF:
10 000 sec. average value
5000 sec. minimum value
TEST VOLTAGE:
(Electrode/electrode): DC 2150 V/2 sec
REFERENCE STANDARDS:
EN 60068-1, EN 132 400, 1994
IEC-Publ. 60384-14/2, 1993; UL 1283, UL 1414
CSA 22.2 No. 8-M 86, CSA 22.2 No. 1-M 90
DIELECTRIC:
Polypropylene film
ELECTRODES:
Metal evaporated
CONSTRUCTION:
Metallized film capacitor, single design
Between interconnected terminations and case (foil method):
AC 2500 V for 2 sec. at 25 °C
Impedance (Z) as a function of frequency (f) at Ta = 20 °C
(average). Measurement with lead length 6 mm.
FURTHER TECHNICAL DATA:
See page 21 (Document No 26504)
PCM
(mm)
PITCH CODE
Pos. 10
TERMINAL Ø d
(mm)
10 D 0.6
15 F 0.8
22.5 I 0.8
27.5 K 0.8
37.5 P 0.8
LEAD LENGTH ORDERING CODE**
X (mm) CODE POS. 11 1 - 4 5 - 7 8 9 10 11 - 13
4-1 B 1778 . . . . 2 . B . 0
5-1 M 1778 . . . . 2 . M . 0
6-1 C 1778 . . . . 2 . C . 0
10-1 E 1778 . . . . 2 . E B 0
15-1 D 1778 . . . . 2 . D B 0
20+5 H 1778 . . . . 2 . H B 0
30+5 L 1778 . . . . 2 . L B 0
RATED
VOLTAGE
PITCH (mm)
10.0 15.0 22.5 27.5 / 37.5
AC 275 V 200 200 150 100
L
pcm ± 0.4 Ø d
W
H
± 0.4 X
Dielectric
Electrode Free margin
0.68 µF
0.33 µF
0.15 µF
0.068 µF
0.033 µF
0.015 µF
0.01 µF
2.2 µF
0.47 µF
0.1 µF
0.047 µF
0.022 µF
0.22 µF
1.5 µF
1.0 µF
0.01 0.05 0.1 0.5 1.0 5.0 10 50 100
10
10
10
10
10
1
0
-1
-2
-3
Z [Ω]
f[MHz]
RoHS
COMPLIAN
T
Pb-free
e3
F1778-275V
AC-Capacitors, Suppression Capacitors
Class X2 AC 275 V (Code pos. 9=2) (MKP) Vishay Roederstein
Document Number: 27610 To contact us: RFI@vishay.com www.vishay.com
Revision: 29-Aug-07 51
APPROVALS
Inbuilt discharging resitor on request (with larger case dimensions).
* For further information about packaging quantities with different lead length and/or taped versions visit www.vishay.com/doc?27622
(Packing Quantities) - use Box No. as reference Bo = Bulk Pack
** These capacitors can be delivered on continuous tape and reel, visit www.vishay.com/doc?27622 T0 = Tray/Pallet
COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL APPROVAL MARK
U.S.A. UL 1283 (for AC 275 V)
UL 1414 (for AC 250 V)
0.01 - 4.7 µF X
0.01 - 1.0 µF X
E 76 297
E 100 682
Canada
(for AC 250 V)
C 22.2 No. 8-M 1986
C 22.2 No. 1-M 1994
0.01 -4.7 µF X
0.01 - 1.0 µF X
1114383
EN 100 682
CB TEST-CERTIFICATE (for AC 275 V) 0.01 - 4.7 µF X2 DE 1-19508
Germany EN 132 400; 1999
IEC 60384-14, 2nd edition; 1995 0.01- 4.7 µF X2 40000787
CAPACITANCE
CODE
POS. 5 - 7
TOL.
CODE POS. 8
J = ± 5 %
K = ± 10 %
M = ± 20 %
PITCH
BOX
NO.
DIMENSIONS
W x H x L
(mm)
(+ 0.2/- 0.4 mm)
WEIGHT
(Lead Length
≤ 6-1 mm)
(g)
QUANTITY
PACKAGE
(Lead Length
≤ 6-1 mm)
(pcs)*
ORDERING CODE**
(mm) CODE
POS. 10
TYPE
C-VALUE
TOL
VO LTAG E
PITCH
LEAD
Length
Design
1 - 4 5 - 7 8 9 10 11 - 13
Pitch 10 mm
0.01 µF X2 K/M 10.0 D 32 3.8 x 8.8 x 12.8 0.6 1500 1778 310 . 2 D . B0
0.012 µF X2 K 10.0 D 32 3.8 x 8.8 x 12.8 0.6 1500 1778 312 K 2 D . B0
0.015 µF X2 K/M 10.0 D 32 3.8 x 8.8 x 12.8 0.6 1500 1778 315 . 2 D . B0
0.018 µF X2 K 10.0 D 02 4.2 x 9.4 x 12.8 0.8 1250 1778 318 K 2 D . B0
0.022 µF X2 K/M 10.0 D 02 4.2 x 9.4 x 12.8 0.8 1250 1778 322 . 2 D . B0
0.027 µF X2 K 10.0 D 03 5.3 x 10.3 x 12.8 1.0 1250 1778 327 K 2 D . B0
0.033 µF X2 K/M 10.0 D 03 5.3 x 10.3 x 12.8 1.0 1000 1778 333 . 2 D . B0
0.039 µF X2 K 10.0 D 03 5.3 x 11.3 x 12.8 1.0 1000 1778 339 K 2 D . B0
0.047 µF X2 M 10.0 D 03 5.3 x 11.3 x 12.8 1.0 1000 1778 347 M 2 D . B0
0.047 µF X2 K 10.0 D 04 6.3 x 11.3 x 12.8 1.3 750 1778 347 K 2 D . B0
0.068 µF X2 K/M 10.0 D 91 6.4 x 12.5 x 12.8 1.5 750 1778 368 . 2 D . B0
0.1 µF X2 M 10.0 D 91 6.4 x 12.5 x 12.8 1.4 750 1778 410 M 2 D . B0
Pitch 15 mm
0.022 µF X2 K/M 15.0 F 05 5.3 x 10.3 x 17.8 0.8 750 1778 322 . 2 F . B0
0.033 µF X2 K/M 15.0 F 05 5.3 x 10.3 x 17.8 0.8 750 1778 333 . 2 F . B0
0.047 µF X2 K/M 15.0 F 05 5.3 x 10.3 x 17.8 1.0 750 1778 347 . 2 F . B0
0.056 µF X2 K 15.0 F 05 5.3 x 10.3 x 17.8 1.4 750 1778 356 K 2 F . B0
0.068 µF X2 K/M 15.0 F 05 5.3 x 10.3 x 17.8 1.5 750 1778 368 . 2 F . B0
0.082 µF X2 K 15.0 F 05 5.3 x 10.3 x 17.8 1.5 750 1778 382 K 2 F . B0
0.1 µF X2 K 15.0 F 49 6.0 x 12.0 x 17.9 2.0 600 1778 410 K 2 F . B0
0.1 µF X2 M 15.0 F 05 5.3 x 10.3 x 17.8 1.8 750 1778 410 M 2 F . B0
0.12 µF X2 K 15.0 F 49 6.0 x 12.0 x 17.9 2.2 600 1778 412 K 2 F . B0
0.15 µF X2 K 15.0 F 07 7.3 x 13.3 x 17.8 2.4 450 1778 415 K 2 F . B0
0.15 µF X2 M 15.0 F 49 6.0 x 12.0 x 17.9 2.2 600 1778 415 M 2 F . B0
0.18 µF X2 K 15.0 F 07 8.3 x 17.3 x 17.8 2.5 450 1778 418 K 2 F . . 0
0.22 µF X2 K/M 15.0 F 08 8.3 x 14.3 x 17.8 3.3 300 1778 422 . 2 F . . 0
0.33 µF X2 K/M 15.0 F 46 10.0 x 16.0 x 17.9 6.3 240 1778 433 . 2 F . . 0
0.39 µF X2 K 15.0 F 70 10.8 x 18.3 x 17.8 7.0 225 1778 439 K 2 F . . 0
0.47 µF X2 K 15.0 F 70 10.8 x 18.3 x 17.8 7.0 225 1778 447 K 2 F . . 0
0.47 µF X2 M 15.0 F 35 10.3 x 17.3 x 17.8 6.5 225 1778 447 M 2 F . . 0
10
F1778-275V
Vishay Roederstein AC-Capacitors, Suppression Capacitors
Class X2 AC 275 V (Code pos. 9 = 2) (MKP)
www.vishay.com To contact us: RFI@vishay.com Document Number: 27610
52 Revision: 29-Aug-07
Inbuilt discharging resitor on request (with larger case dimensions).
* For further information about packaging quantities with different lead length and/or taped versions visit www.vishay.com/doc?27622
(Packing Quantities) - use Box No. as reference Bo = Bulk Pack
** These capacitors can be delivered on continuous tape and reel, visit www.vishay.com/doc?27622 T0 = Tray/Pallet
APPLICATION NOTES
•For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of
275 V (AC).
•These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
•These capacitors are not intended for series impedance application. For these situations in case safety approvals are
requested, please refer to our special capacitors of 1772 series with internal series connection.
•The maximum ambient temperature must not exceed 100 °C.
•Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC)
and divided by the applied voltage.
CAPACITANCE
CODE
POS. 5 - 7
TOL.
CODE POS. 8
J = ± 5 %
K = ± 10 %
M = ± 20 %
PITCH
BOX
NO.
DIMENSIONS
W x H x L
(mm)
(+ 0.2/- 0.4 mm)
WEIGHT
(Lead Length
≤ 6-1 mm)
(g)
QUANTITY
PAC KAGE
(Lead Length
≤ 6-1 mm)
(pcs)**
ORDERING CODE**
(mm) CODE
POS. 10
TYPE
C-VALUE
TOL
VOLTAGE
PITCH
LEAD
Length
Design
1 - 4 5 - 7 8 9 10 11 - 13
Pitch 22.5 mm
0.15 µF X2 K/M 22.5 I 09 6.3 x 14.3 x 26.3 3.3 260 1778 415 . 2 I . . 0
0.22 µF X2 K 22.5 I 09 6.3 x 14.3 x 26.3 3.4 260 1778 422 K 2 I . . 0
0.22 µF X2 M 22.5 I 09 6.3 x 14.3 x 26.3 3.4 260 1778 422 M 2 I . . 0
0.27 µF X2 K 22.5 I 12 8.3 x 16.3 x 26.3 4.1 200 1778 427 K 2 I . . 0
0.33 µF X2 K 22.5 I 12 8.3 x 16.3 x 26.3 5.0 190 1778 433 K 2 I . . 0
0.33 µF X2 M 22.5 I 11 7.3 x 15.3 x 26.2 4.1 235 1778 433 M 2 I . . 0
0.39 µF X2 K 22.5 I 12 8.3 x 16.3 x 26.3 5.0 200 1778 439 K 2 I . . 0
0.47 µF X2 K 22.5 I 01 8.8 x 16.8 x 26.3 5.7 190 1778 447 K 2 I . . 0
0.47 µF X2 M 22.5 I 12 8.3 x 16.3 x 26.2 5.0 200 1778 447 M 2 I . . 0
0.56 µF X2 K 22.5 I 45 10.8 x 20.8 x 26.3 8.0 150 1778 456 K 2 I . . 0
0.68 µF X2 K 22.5 I 45 10.8 x 20.8 x 26.3 8.0 150 1778 468 K 2 I . . 0
0.68 µF X2 M 22.5 I 13 10.3 x 18.3 x 26.2 6.7 170 1778 468 M 2 I . . 0
1.0 µF X2 M 22.5 I 27 12.3 x 20.0 x 26.3 8.7 135 1778 510 M 2 I . . 0
Pitch 27.5 mm
0.47 µF X2 K/M 27.5 K 23 8.8 x 16.8 x 31.3 6.8 160 1778 447 . 2 K . . 0
0.56 µF X2 K 27.5 K 23 8.8 x 16.8 x 31.3 7.0 160 1778 456 K 2 K . . 0
0.68 µF X2 K/M 27.5 K 29 8.8 x 18.3 x 31.3 7.4 160 1778 468 . 2 K . . 0
0.82 µF X2 K 27.5 K 14 11.0 x 20.3 x 31.3 9.1 125 1778 482 K 2 K . . 0
1.0 µF X2 K/M 27.5 K 14 11.0 x 20.3 x 31.3 9.1 125 1778 510 . 2 K . . 0
1.2 µF X2 K 27.5 K 15 13.0 x 23.3 x 31.3 12.9 110 1778 512 K 2 K . . 0
1.5 µF X2 K/M 27.5 K 15 13.0 x 23.3 x 31.3 13.2 110 1778 515 . 2 K . . 0
1.8 µF X2 K 27.5 K 17 16.3 x 29.3 x 31.3 19.0 85 1778 518 K 2 K . . 0
2.2 µF X2 K/M 27.5 K 17 16.3 x 29.3 x 31.3 21.0 85 1778 522 . 2 K . . 0
3.3 µF X2 K 27.5 K 41 19.5 x 34.8 x 31.3 29.8 70 1778 533 K 2 K . . 0
3.3 µF X2 M 27.5 K 40 17.8 x 32.3 x 31.3 27.8 80 1778 533 M 2 K . . 0
Pitch 37.5 mm
2.2 µF X2 K/M 37.5 P 16 14.0 x 24.3 x 41.3 19 80 1778 522 . 2 P . . 0
3.3 µF X2 M 37.5 P 19 15.5 x 28.3 x 41.3 25.0 70 1778 533 M 2 P . . 0
4.7 µF X2 M 37.5 P 20 17.8 x 32.3 x 41.3 31.6 60 1778 547 M 2 P . . 0
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
