1PS79SB10,115 - NEXPERIA - Datasheet.Support

Important notice

Dear Customer,

On 7 February 2017 the former NXP Standard Product business became a new company with the

tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS

semiconductors with its focus on the automotive, industrial, computing, consumer and wearable

application markets

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use

the references to Nexperia, as shown below.

Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/,

use http://www.nexperia.com

Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use

salesaddresses@nexperia.com (email)

Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on

the version, as shown below:

reserved

Should be replaced with:

If you have any questions related to the data sheet, please contact our nearest sales office via e-mail

or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and

understanding,

Kind regards,

Team Nexperia

1PS79SB10

Schottky barrier single diode

14 August 2012 Product data sheet

Scan or click this QR code to view the latest information for this product

1. Product profile

1.1 General description

Planar Schottky barrier diode with an integrated guard ring for stress protection,

encapsulated in a SOD523 (SC-79) ultra small Surface-Mounted Device (SMD) plastic

package.

1.2 Features and benefits

•Low forward voltage

•Guard ring protected

•Ultra small plastic SMD package

•AEC-Q101 qualified

1.3 Applications

•Ultra high-speed switching

•Voltage clamping

•Protection circuits

•Blocking diodes

1.4 Quick reference data

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

IFforward current - - 200 mA

VRreverse voltage - - 30 V

VFforward voltage IF = 10 mA; Tamb = 25 °C - - 400 mV

2. Pinning information

Table 2. Pinning information

Pin Symbol Description Simplified outline Graphic symbol

1 K cathode[1]

2 A anode

SOD523

aaa-003679

K A

[1] The marking bar indicates the cathode.

NXP Semiconductors 1PS79SB10

Schottky barrier single diode

Product data sheet 14 August 2012 2 / 8

3. Ordering information

Table 3. Ordering information

PackageType number

Name Description Version

1PS79SB10 SOD523 plastic surface-mounted package; 2 leads SOD523

4. Marking

Table 4. Marking codes

Type number Marking code

1PS79SB10 F

5. Limiting values

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

VRreverse voltage - 30 V

IFforward current - 200 mA

IFRM repetitive peak forward current tp ≤ 1 s; δ ≤ 0.5 - 300 mA

IFSM non-repetitive peak forward

current

tp < 10 ms; Tj(init) = 25 °C - 600 mA

Tjjunction temperature - 125 °C

Tamb ambient temperature -65 125 °C

Tstg storage temperature -65 150 °C

6. Thermal characteristics

Table 6. Thermal characteristics

Symbol Parameter Conditions Min Typ Max Unit

Rth(j-a) thermal resistance

from junction to

ambient

in free air [1] - - 450 K/W

[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard

footprint.

NXP Semiconductors 1PS79SB10

Schottky barrier single diode

Product data sheet 14 August 2012 3 / 8

7. Characteristics

Table 7. Characteristics

Symbol Parameter Conditions Min Typ Max Unit

IF = 0.1 mA; Tamb = 25 °C - - 240 mV

IF = 1 mA; Tamb = 25 °C - - 320 mV

IF = 10 mA; Tamb = 25 °C - - 400 mV

IF = 30 mA; Tamb = 25 °C - - 500 mV

VFforward voltage

IF = 100 mA; Tamb = 25 °C - - 800 mV

IRreverse current VR = 25 V; Tamb = 25 °C; pulsed;

tp = 300 µs; δ = 0.02

- - 2 µA

Cddiode capacitance f = 1 MHz; Tamb = 25 °C; VR = 1 V - - 10 pF

103

102

10- 1

(mA)

VF(V)

1.20.80.40

msa892

(3)(2)(1)

(1) Tamb = 125 °C

(2) Tamb = 85 °C

(3) Tamb = 25 °C

Fig. 1. Forward current as a function of forward

voltage; typical values

0 10 20 30

VR(V)

103

102

10- 1

(µA)

(1)

(2)

(3)

msa893

(1) Tamb = 125 °C

(2) Tamb = 85 °C

(3) Tamb = 25 °C

Fig. 2. Reverse current as a function of reverse

voltage; typical values

NXP Semiconductors 1PS79SB10

Schottky barrier single diode

Product data sheet 14 August 2012 4 / 8

0 10 20 30

VR(V)

(pF)

msa891

f = 1 MHz; Tamb = 25 °C

Fig. 3. Diode capacitance as a function of reverse voltage; typical values

8. Test information

8.1 Quality information

This product has been qualified in accordance with the Automotive Electronics Council

(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is

suitable for use in automotive applications.

9. Package outline

02-12-13Dimensions in mm

1.65

1.55

1.25

1.15

0.17

0.11

0.34

0.26

0.65

0.58

0.85

0.75

Fig. 4. SOD523

NXP Semiconductors 1PS79SB10

Schottky barrier single diode

Product data sheet 14 August 2012 5 / 8

10. Soldering

Footprint information for reflow soldering of plastic surface-mounted, 2 leads package SOD523

sod523_fr

occupied area

solder land

solder resist

solder land plus solder paste

solder paste deposit

Dimensions in mm

0.6

(2×)

0.5

(2×)

2.15

1.4

0.4

(2×)

0.5

(2×)

1.2

Fig. 5. Reflow soldering footprint for SOD523 (SOD523)

11. Revision history

Table 8. Revision history

Data sheet ID Release date Data sheet status Change notice Supersedes

1PS79SB10 v.2 20120814 Product data sheet - 1PS79SB10 v.1

Modifications: •The format of this document has been redesigned to comply with the new identity guidelines

of NXP Semiconductors.

•Legal texts have been adapted to the new company name where appropriate.

•Package outline drawing replaced by minimized package outline drawing.

•Section "Test information" added.

•Section "Soldering" added.

1PS79SB10 v.1 19980716 Product data sheet - -

NXP Semiconductors 1PS79SB10

Schottky barrier single diode

Product data sheet 14 August 2012 6 / 8

12. Legal information

12.1 Data sheet status

Document

status [1][2]

Product

status [3]

Definition

Objective

[short] data

sheet

Development This document contains data from

the objective specification for product

development.

Preliminary

[short] data

sheet

Qualification This document contains data from the

preliminary specification.

Product

[short] data

sheet

Production This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the Internet at URL http://www.nxp.com.

12.2 Definitions

Preview — The document is a preview version only. The document is still

subject to formal approval, which may result in modifications or additions.

NXP Semiconductors does not give any representations or warranties as to

the accuracy or completeness of information included herein and shall have

no liability for the consequences of use of such information.

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. NXP Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences

of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the

relevant full data sheet, which is available on request via the local NXP

Semiconductors sales office. In case of any inconsistency or conflict with the

short data sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

NXP Semiconductors and its customer, unless NXP Semiconductors and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the NXP Semiconductors product

is deemed to offer functions and qualities beyond those described in the

Product data sheet.

12.3 Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, NXP Semiconductors does not give

any representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. NXP Semiconductors takes no

responsibility for the content in this document if provided by an information

source outside of NXP Semiconductors.

In no event shall NXP Semiconductors be liable for any indirect, incidental,

punitive, special or consequential damages (including - without limitation -

lost profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards

customer for the products described herein shall be limited in accordance

with the Terms and conditions of commercial sale of NXP Semiconductors.

Right to make changes — NXP Semiconductors reserves the right to

make changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

Suitability for use in automotive applications — This NXP

Semiconductors product has been qualified for use in automotive

applications. Unless otherwise agreed in writing, the product is not designed,

authorized or warranted to be suitable for use in life support, life-critical or

safety-critical systems or equipment, nor in applications where failure or

malfunction of an NXP Semiconductors product can reasonably be expected

to result in personal injury, death or severe property or environmental

damage. NXP Semiconductors and its suppliers accept no liability for

inclusion and/or use of NXP Semiconductors products in such equipment or

applications and therefore such inclusion and/or use is at the customer's own

risk.

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. NXP Semiconductors makes no

representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and operation of their

applications and products using NXP Semiconductors products, and NXP

Semiconductors accepts no liability for any assistance with applications or

customer product design. It is customer’s sole responsibility to determine

whether the NXP Semiconductors product is suitable and fit for the

customer’s applications and products planned, as well as for the planned

application and use of customer’s third party customer(s). Customers should

provide appropriate design and operating safeguards to minimize the risks

associated with their applications and products.

NXP Semiconductors does not accept any liability related to any default,

damage, costs or problem which is based on any weakness or default

in the customer’s applications or products, or the application or use by

customer’s third party customer(s). Customer is responsible for doing all

necessary testing for the customer’s applications and products using NXP

Semiconductors products in order to avoid a default of the applications

and the products or of the application or use by customer’s third party

customer(s). NXP does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — NXP Semiconductors

products are sold subject to the general terms and conditions of commercial

sale, as published at http://www.nxp.com/profile/terms, unless otherwise

agreed in a valid written individual agreement. In case an individual

agreement is concluded only the terms and conditions of the respective

agreement shall apply. NXP Semiconductors hereby expressly objects to

applying the customer’s general terms and conditions with regard to the

purchase of NXP Semiconductors products by customer.

NXP Semiconductors 1PS79SB10

Schottky barrier single diode

Product data sheet 14 August 2012 7 / 8

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

12.4 Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Adelante, Bitport, Bitsound, CoolFlux, CoReUse, DESFire, EZ-HV,

FabKey, GreenChip, HiPerSmart, HITAG, I²C-bus logo, ICODE, I-CODE,

ITEC, Labelution, MIFARE, MIFARE Plus, MIFARE Ultralight, MoReUse,

QLPAK, Silicon Tuner, SiliconMAX, SmartXA, STARplug, TOPFET,

TrenchMOS, TriMedia and UCODE — are trademarks of NXP B.V.

HD Radio and HD Radio logo — are trademarks of iBiquity Digital

Corporation.

NXP Semiconductors 1PS79SB10

Schottky barrier single diode

Product data sheet 14 August 2012 8 / 8

13. Contents

1 Product profile ....................................................... 1

1.1 General description .............................................. 1

1.2 Features and benefits ...........................................1

1.3 Applications .......................................................... 1

1.4 Quick reference data ............................................ 1

2 Pinning information ............................................... 1

3 Ordering information ............................................. 2

4 Marking ................................................................... 2

5 Limiting values .......................................................2

6 Thermal characteristics .........................................2

7 Characteristics .......................................................3

8 Test information ..................................................... 4

8.1 Quality information .........................................

9 Package outline ..................................................... 4

10 Soldering ................................................................ 5

11 Revision history ..................................................... 5

12 Legal information ...................................................6

12.1 Data sheet status ................................................. 6

12.2 Definitions .............................................................6

12.3 Disclaimers ...........................................................6

12.4 Trademarks .......................................................... 7

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 14 August 2012