A1611BAAD2E110 - Agere Systems, Inc.

A1611A/B DFB Laser Modules

Data Sheet, Rev. 4

June 2001

Features

■OC-48 pinout compatible

■Negative bias

■112 channel loading available

■Meets

Telcordia Technologies

* 468 specifications

■Output power, up to 13 mW

Applications

■1310 forw ard path

■Broadcast and narrowcast networks

Telcordia Technologies

is a trademark of Telcordia Technologies ,

Inc.

Description

The A1611A/B 1310 nm DFB laser modules are

designed for broadcast and narrowcast CATV appli-

cations. The modules are highly linear , OC-48 pinout-

compatible devices available with standard power

output up to 13 mW.

The A1611A/B module is optimized to assist OEM

customers with 1310 nm CATV transmitter design. Its

range of standard-to-enhanced performance specifi-

cations and available output power ensures the flexi-

bility a CATV system designer needs to accurately

and cost-effectively address the requirements of any

forward-path application.

Data Sheet, Rev. 4

A1611A/B DFB Laser Modules June 2001

Agere Systems Inc.

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-

lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess

of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended

periods can adversely affect device reliability.

Electrical/Optical Characteristics

* OMI = 2.8% min, 112 unmodulated NTSC channels, through fiber, up to 20 mW output power.

Parameter Symbol Condition Min Max Unit

Operating Case Temperature

Range TCIF = IOP –20 65 °C

Storage Case Temperature Range Tstg — –40 70 °C

Lase r Forward Bias — — — 120 mA

Reverse Voltage (Laser) VR——2V

Reverse Voltage Photodiode VRPD ——10V

TEC Current ITEC –20 °C < TC < 65 °C,

TOP = 25 °C,

IF = 100 mA

—1.5A

Table 1. Electrical and Optical Characteristics

Parameter Symbol Condition Min Typ Max Unit

Wa velength λOP IF = IOP

, T = TOP 1300 1310 1320 nm

Optic al Output Power POIF = IOP 4—13mW

Optical Isolation ISO T OP = 25 °C 30 — — dB

Side Mode Suppression

Ratio SMSR IF = IOP 30 — — dB

Threshold Current ITH 25 °C , BOL — — 30 mA

Operating Current IOP BOL — 65 120 mA

Monitor Operating Current IMON IOP = 0 mA 10 — 200 µA/mW

Thermistor Resistance RTH TOP = 25 °C — 10 ± 1 @ 25 °C — kΩ

Thermisto r Tem peratur e

Coefficient TCTH TOP = 25 °C — –4.4 @ 25 °C — %/°C

Table 2. RF Characteristics

Parameter Symbol Condition Min Typ Max Unit

Frequency Range F — 20 — 860 MHz

Frequency Response |S21| IF = 60 mA,

20 MHz—860 MHz,

TOP = 25 °C

—± 0.5 —dB

Carrier-to-Noise Ratio*CNR — — 51 — dB

Composite Second Order

1611A

1611B

CSO — —

—57

60 —

——

—

Composite Triple Beat CTB — — 66 — dB

Relative Intensity Noise RIN — — < –155 — dB/Hz

Agere Systems Inc.

Data Shee t, Rev. 4

June 2001 A1611A/B DFB Laser Modules

Electrical Schematics

Figure 1. A1611A/B Laser Schematic

Figure 2. A1611A/B Circuit Schematic

CASE

GROUND

(+)

(–)

(+)

(–)

TEC

(–)

(+)

CASE

GROUND

ISOLATOR

(+)

1-1233(F)

1-1234(F)

THERMISTOR

TEC (–)

MPC CATHODE

THERMISTOR

dc LAS ER

BIAS

MPD ANODE

CASE GROUND

TEC (+)

CASE

GROUND

CASE

GROUND

MPC CATHODENC

LASER

COMMON (+ )

LASER

MODULATION (–)

LASER

COMMON (+ ) 39 nH

200

Ω

0.01

3.3

1000 pf

0.01

SEE

3A AN D 3B

FIGURES

FIGURE 4

Data Sheet, Rev. 4

A1611A/B DFB Laser Modules June 2001

Agere Systems Inc.

Electrical Schematics (continued)

Figure 3a. Impedance-Matched Configuration

Figure 3b. Resistive-Matched Configuration

1 pF— 0.01

f0.01

VSWR

T1*

3:5

0.5 pF—2.5 pF

SEE PIN 12,

FIGURE 2

0.01

FREQUENCY

RESPONSE

*T1 (75

Ω

) 3: 5.

5 pF

1-1238F.a

SEE PIN 12,

FIGURE 2

37.5 Ω

1-1238F.b

Note: When ordering the dc set, the following boards are included: alarm board, 9108-004; TEC board, 9028-004; constant current, 9383-004.

Figure 4. dc Set (Agere Systems-Supplied Option)

CONSTANT ALARM

TEC

1 THERMISTOR

2 THERMISTOR

3 dc LASER BIAS

4 MPD ANODE (CASE GROUND)

5 MPC CATHODE

6 TEC (+)

7 TEC (–)

8 GND

9 GND

10 GND

THERMISTOR

TEC (–)

MPC CATHODE

THERMISTOR

dc LASER

BIAS

MPD ANODE

CASE GROUND

TEC (+)

MPC CATHODE

39 nH

200

Ω

0.01

3.3

1000 pf

0.01

1-1238F.c

Agere Systems Inc.

Data Shee t, Rev. 4

June 2001 A1611A/B DFB Laser Modules

Outline Diagram

Dimensions are in inches and (millimeters).

Pin Information

Table 3. Pin Descriptions

Pin No. Description

1Thermistor

2Thermistor

3 dc Laser Bias (–)

4 MPD Anode, Case Ground (–)

5 MPD Cathode (+)

6 Thermoelectric Cooler (+)

7 Thermoelectric Cooler (–)

8 Case Ground

9 Case Ground

10 NC

11 Laser Common (+)

12 Laser Modulation (–)

13 Laser Common (+)

14 NC

LOCATION FOR LABEL

INCLUDING SERIAL NUMBER

AND DATE CODE

(LABEL NOT SHOWN)

0.049

(1.2)

4 x ø 0.105 (2.7)

0.213

(5.4)

PIN 1

LEADS

0.030 (0.8) WIDE x 0.008 (0.2) THICK

0.120 (3.0) MINIMUM LENGTH

6 SPCS @ 0.100 (2.5)

0.250

(6.4)

0.190 ± 0.03

(5.0 ± 0.8)

0.078

(2.0)

0.215 ± 0.01

(5.5 ± 0.25) 0.248

(6.3)

0.040

(1.0)

0.350

(8.9)

0.500

(12.7)

0.820

(20.8)

1.025

(26.0)

1.180

(30.0)

0.365

(9.3)

0.700 ± 0.03

(18.0 ± 0.8)

1-1181(F).b

Data Sheet, Rev. 4

A1611A/B DFB Laser Modules June 2001

Agere Systems Inc.

Laser Safety Informatio n

Class IIIb Laser Product

FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser

Safety requirements. All versions are Class 3B laser products per

IEC

* 60825-1:1993. The device has been classi-

fied with the FDA under an accession number to be determined.

This product complies with 21 CFR 1040.10 and 1040.11.

Single- mo de fibe r pigt ail

Wavelength = 1.3 µm

Maximum power = 30 mW

Because of size constraints, laser safety labeling (including the FDA Class IIIb label), is not affixed to the module

but attached to the outside of the shipping carton.

Product is not shipped with power supply.

Caution: Use of controls, adjustments, and procedures other than those specified herein may result in

hazardous laser radiation exp osure.

IEC

is a registered trademark of The Inter national Electrotechnical Commission.

DANGER

INVISIBLE LASER RADIATION

IS EMITTED FROM THE END

OF FIBER OR CONNECTOR

Avoid direct exposure to beam

Do not view beam directly with

optical in stru men ts

INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR

Avoid exposure to beam

Class 3B Laser Product IEC-60825M 1993 Max. Output: 30 m W Waveleng th: 1.3

Agere Systems Inc.

Data Shee t, Rev. 4

June 2001 A1611A/B DFB Laser Modules

Ordering Information

Ordering Code Definitions

* For additional ordering information, please contact an Agere Systems accou nt manager at OPTO West, 1-800-362-3891 (for sales staff,

please press option 2).

Field Description

Family N a me

Analog 1310 nm, DFB, Laser

Distortion Performance

AA = Standard Performance

WW = W ir el e s s

Frequency Plan

D2 = 110 Channel

08 = 8 mW

10 = 10 m W

13 = 13 m W

A1611 AA D1 E1 04

BB = Enhanced Performance

PA = PAL 60 Tested

D4 = 60 Channel

D1 = 80 Channel

04 = 4 mW

06 = 6 mW

Optical Connector

E1 = FC/APC

E2 = SC/APC

E3 = None (No connector)

Optical Power

N = None (Wireless)

For additional informatio n, co nta ct you r Agere Systems Account Mana ger or the following:

INTERNET: http://www.agere.com

E-MAIL: docmaster@micro.lucent.com

N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L- 15 P-BA, Allentown, PA 18109-3286

1-800-372-2447, FAX 610-712-4106 (I n CANA DA: 1-800-553-2448, FAX 610-712-4106)

ASIA PACIFIC: Agere Systems Singa pore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118 256

Tel. (65) 778 8833, FAX (65) 777 7495

CHINA: Agere Systems (Shanghai) Co., Ltd., 33/F Jin Mao Tower, 88 Century Boulevard Pudong, Shanghai 2 0012 1 PRC

Tel. (86) 21 50471212, FAX (86) 21 50472266

JAPAN: Agere Systems Japan Ltd., 7-18, Higashi-Gotan da 2-c home, Shinagawa-ku, Tokyo 141, Japan

Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700

EUROPE: Data Requests: DATALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148

Technical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK)

Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.

June 2001

DS00-290OPTO-4 (Replaces DS00-290OPTO -3)

Data Sheet, Rev. 4

A1611A/B DFB Laser Modules June 2001