FSS22L........FSS215L 2.0 Amp. Surface Mount Schottky Barrier Rectifiers Dimensions in mm. Voltage 20 to 150 V CASE: M1F (DO219AA) Current 2.0 A R * For surface mounted application * Low profile package * Ideal for automated pick & place * Low power loss, high efficiency * High current capability,low VF * High surge current capability * Plastic material used carriers Underwriters Laboratory Classification 94V-0 * Epitaxial construction * High temperature soldering: 260 C / 10 seconds at terminals MECHANICAL DATA * Case: Sub SMA plastic case * Terminal: Pure tin plated, lead free. * Polarity: Color band denotes cathode end * Packaging: 12 mm tape per EIA STD RS-481 * Weight approx. 15 mg XXX = Marking code WW = Week code Y = Year code Maximun Ratings and Electrical Characteristics at 25 C Marking code FSS22L FSS24L FSS26L FSS210L FSS215L B1L B3L B5L BBL BCL VRRM Maximum Recurrent Peak Reverse Voltage (V) 20 40 60 100 150 VRMS Maximum RMS Voltage (V) 14 28 42 70 105 VDC Maximum DC Blocking Voltage (V) 20 40 60 100 150 I(AV) Maximum Average Forward Rectified Current at TL (See Graphic) 2.0 A IFSM Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC Metod) 50 A VF Maximum Instantaneous Forward Rectified (Note 1) @ 2.0A 0.85 V 0.95 V IR Maximum DC Reverse Current @ TA = 25 C at Rated DC Blocking Voltage @ TA = 125 C Cj Typical Junction Capacitance at 1 MHz and Reverse Voltage of 4VDC 130 pF Rthj-l Maximum Thermal Resistance (Note 2) 17 C/W 0.5 V 0.70 V 0.4 mA 15 mA Rthj-a 0.1 mA 5 mA 10 mA 75 C/W Tj Operating Temperature Range Tstg Storage Temperature Range -65 to + 125 C -65 to + 150 C -65 to + 150 C Notes: 1. Pulse Test with PW=300 sec, 1% Duty Cycle. 2. Measured on P.C. Board with 7.0mm x 7.0mm Copper Pad Areas. Sep - 08 FSS20L Rating And Characteristic Curves 2.0 RESISTIVE OR INDUCTIVE LOAD FSS26L-FSS215L 1.5 FSS22L-FSS24L 1.0 0.5 PCB Mounted on 5.0x5.0 mm Copper Pad Areas 0 50 60 70 80 TYPICAL FORWARD CHARACTERISTICS IF, instantaneous forward current (A) IF(AV), average forward current (A) MAXIMUM FORWARD CURRENT DERATING CURVE 90 100 110 120 130 140 150 160 50 10 FSS22L-FSS24L FSS215L 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, forward voltage (V) TYPICAL JUNCTION CAPACITANCE 400 50 40 Cj, junction capacitance (pF) 8.3ms Single Half Sine Wawe JEDEC Method AT RATED TL 30 20 10 0 1 10 100 1 10 100 Number of cycles at 60 Hz VR, reverse voltage (V) TYPICAL REVERSE CHARACTERISTICS TYPICAL TRANSIENT THERMAL CHARACTERISTIC 1000 FSS22L-FSS24L FSS26L-FSS215L Tj = 125 C 1 Tj = 75 C 0.1 Tj = 25 C 0.01 0 Tj = 25 C f= 1.0MHz Vsig=50m Vp-p 10 0.1 100 20 40 60 80 100 120 Percent of rated peak reverse voltage (%) 140 Transient thermal impedance (C/W) IFSM, peak forward surge current (A) Tj = 25 C PULSE WIDTH=300S 1% DUTY CYCLE MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT IR, Instantaneous reverse current (mA) FSS210L 10 Tc, case temperature (C) 0.001 FSS26L 100 10 1 0.1 0.01 0.1 1 10 100 t, Pulse duration (sec) Sep - 08