VDE HC 1c, 2c, 4c Relay for control panel of 1A to 10A (1c/2c/3c/4c) Standard type Amber sealed type FEATURES TYPICAL APPLICATIONS 1. Standard type, Amber sealed type and Keep type 2. Rich lineup includes relays with operating indication, with diode and with CR circuit 3. Full range of types Plug-in type, PC board type and TM type 4. Sockets and terminal sockets are available. 1. Factory automation equipment and automotive devices 2. Control panels, power supply equipment, molding equipment, machine tools, welding equipment, agricultural equipment, etc. 3. Office equipment, automatic vending machines, telecommunications equipment, disaster prevention equipment, copiers, measuring devices, medical equipment, amusement devices, etc. 4. All types of household appliance With CR circuit type Keep relay HC RELAYS With diode type RoHS compliant ORDERING INFORMATION HC Contact arrangement 1: 1 Form C 2: 2 Form C 3: 3 Form C 4: 4 Form C 4D: Bifurcated contact (twin) Nil: Standard type E: Amber sealed type (Only 1 Form C and 2 Form C) ED: Amber sealed type bifurcated contact (twin) (Only 4 Form C) K: Keep type Terminal arrangement H: Plug-in type HL: Plug-in with LED indication L: Plug-in with LED indication (Amber sealed type) HP: PC board type PL: PC board with LED indication HPL: PC board with LED indication (Amber sealed type) HTM: TM type Nominal coil voltage AC 6, 12, 24, 48, 100 (100/110), 120 (110/120), 200 (200/220), 240 (220/240) V DC 6, 12, 24, 48, 100 (100/110) V Surge suppression D: With diode R: With CR curcuit Contact material Contact material Contact arrangement 1 Form C 2 Form C 3 Form C 4 Form C 4-pole bifurcated (twin) AgSnO2 type AgNi type F F F Nil Nil Notes: Certified by UL and CSA (except for keep type) Please consult us about VDE (1 Form C, 2 Form C, and 4 Form C only) and TV-3 (1 Form C and 2 Form C only) approved products. ASCTB4E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e HC LINEUP Type Contact arrangement Remarks Plug-in terminal type Without LED With LED HC relay Standard type Bifurcated (Twin) 1 Form C 2 Form C 3 Form C 4 Form C 4 Form C 1 Form C 2 Form C 4 Form C 4 Form C Single side stable 2 Form C Single side stable Bifurcated (Twin) HC relay Amber sealed type HC keep (latching) relay DC type with surge absorbing diode Single side stable Single side stable Bifurcated (Twin) AC type with surge absorbing CR circuit Single side stable Bifurcated (Twin) A A A A A A A A A PC board terminal type Without LED With LED Top mounting type (TM type) 1 Form C A A A A A A A A A A (With operating indication) A A A A A A A A A A A A (With operating indication) -- -- -- 2 Form C 3 Form C 4 Form C 4 Form C 1 Form C A A A A A A A A A A -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 2 Form C 3 Form C 4 Form C 4 Form C A A A A A A A A -- -- -- -- -- -- -- -- -- -- -- -- -- A A A A A A A A A A A A A A A A A A -- -- Amber sealed type also available 17 mm higher than standard type A: Available Notes: 1. HC relays with ground terminals also available. 2. HC relays with 0.9 mm wide PC board terminals also available. HC RELAY CONTACT ARRANGEMENT Type Part number Features Single side stable contact HC Suitable for high-capacity load switching Standard type HC relays have high single-contact capacity; 1 Form C: 10 A 2 Form C and 3 Form C: 7 A 4 Form C: 5 A 4-pole bifurcated (twin) contact HC4D Bifurcated (twin) contact ensures high contact reliability Suitable for low level loads Minimum switching capability: 100 A 100m V DC (reference value) LED INDICATION TYPE Type Part number Features With LED indication type HC-HL LED lights up when relay is operating Inspection and detection of trouble is easy. LEDs are green for DC types and red for AC types. All types are available with LED indication. 2 3 4 5 6 7 8 9 10 11 12 13 - +14 LED * LED colors indicate the type of relay: red for AC type and green for DC type. Panasonic Corporation 1 Automation Controls Business Unit industrial.panasonic.com/ac/e Protection diode (Bottom view) ASCTB4E 201201-T HC HC RELAY SERIES PRODUCT TYPES Type Part number Features Type Part number Features Amber sealed type HC relay HCE Relay is completely sealed with resin. Provides high reliability in adverse surroundings. Suitable for use in dusty conditions or where organic gases are present HC keep (Latching) relay HC2K HC relay with diode type (for DC) HC--V-D Has built-in diode to absorb surge when the coil goes to the off state (for DC type). Magnetic latching relay Suitable for protecting relay driver circuits and Suitable for nominal operating power saving of for noise suppression operating circuits and for memory circuits Diode characteristics: Has operating indication (mechanical indicator). Reverse breakdown voltage 1,000 V Forward current 1 A HC relay with CR circuit (for AC) HC--V-R Has built-in CR circuit to absorb surge when the coil goes to the off state (for AC). Relay with CR circuit is 17 mm higher than standard type relay. -- -- -- -- -- -- 4-pole bifurcated (twin) type and Relay with LED indication are available. TYPES 1. Standard type 1) Plug-in type Nominal coil voltage 6V AC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1-H-AC6V-F HC1-H-AC12V-F HC1-H-AC24V-F HC1-H-AC48V-F HC1-H-AC100V-F HC1-H-AC120V-F HC1-H-AC200V-F HC1-H-AC240V-F HC1-H-DC6V-F HC1-H-DC12V-F HC1-H-DC24V-F HC1-H-DC48V-F HC1-H-DC100V-F 2 Form C Part No. HC2-H-AC6V-F HC2-H-AC12V-F HC2-H-AC24V-F HC2-H-AC48V-F HC2-H-AC100V-F HC2-H-AC120V-F HC2-H-AC200V-F HC2-H-AC240V-F HC2-H-DC6V-F HC2-H-DC12V-F HC2-H-DC24V-F HC2-H-DC48V-F HC2-H-DC100V-F 3 Form C Part No. HC3-H-AC6V-F HC3-H-AC12V-F HC3-H-AC24V-F HC3-H-AC48V-F HC3-H-AC100V-F HC3-H-AC120V-F HC3-H-AC200V-F HC3-H-AC240V-F HC3-H-DC6V-F HC3-H-DC12V-F HC3-H-DC24V-F HC3-H-DC48V-F HC3-H-DC100V-F 4 Form C Part No. HC4-H-AC6V HC4-H-AC12V HC4-H-AC24V HC4-H-AC48V HC4-H-AC100V HC4-H-AC120V HC4-H-AC200V HC4-H-AC240V HC4-H-DC6V HC4-H-DC12V HC4-H-DC24V HC4-H-DC48V HC4-H-DC100V 4 Form C (twin) Part No. HC4D-H-AC6V HC4D-H-AC12V HC4D-H-AC24V HC4D-H-AC48V HC4D-H-AC100V HC4D-H-AC120V HC4D-H-AC200V HC4D-H-AC240V HC4D-H-DC6V HC4D-H-DC12V HC4D-H-DC24V HC4D-H-DC48V HC4D-H-DC100V 2 Form C Part No. HC2-HL-AC6V-F HC2-HL-AC12V-F HC2-HL-AC24V-F HC2-HL-AC100V-F HC2-HL-AC120V-F HC2-HL-AC200V-F HC2-HL-AC240V-F HC2-HL-DC6V-F HC2-HL-DC12V-F HC2-HL-DC24V-F HC2-HL-DC48V-F HC2-HL-DC100V-F 3 Form C Part No. HC3-HL-AC6V-F HC3-HL-AC12V-F HC3-HL-AC24V-F HC3-HL-AC100V-F HC3-HL-AC120V-F HC3-HL-AC200V-F HC3-HL-AC240V-F HC3-HL-DC6V-F HC3-HL-DC12V-F HC3-HL-DC24V-F HC3-HL-DC48V-F HC3-HL-DC100V-F 4 Form C Part No. HC4-HL-AC6V HC4-HL-AC12V HC4-HL-AC24V HC4-HL-AC100V HC4-HL-AC120V HC4-HL-AC200V HC4-HL-AC240V HC4-HL-DC6V HC4-HL-DC12V HC4-HL-DC24V HC4-HL-DC48V HC4-HL-DC100V 4 Form C (twin) Part No. HC4D-HL-AC6V HC4D-HL-AC12V HC4D-HL-AC24V HC4D-HL-AC100V HC4D-HL-AC120V HC4D-HL-AC200V HC4D-HL-AC240V HC4D-HL-DC6V HC4D-HL-DC12V HC4D-HL-DC24V HC4D-HL-DC48V HC4D-HL-DC100V Standard packing: Carton: 20 pcs.; Case: 200 pcs. 2) Plug-in type (with LED indication) Nominal coil voltage 6V AC 12V AC 24V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1-HL-AC6V-F HC1-HL-AC12V-F HC1-HL-AC24V-F HC1-HL-AC100V-F HC1-HL-AC120V-F HC1-HL-AC200V-F HC1-HL-AC240V-F HC1-HL-DC6V-F HC1-HL-DC12V-F HC1-HL-DC24V-F HC1-HL-DC48V-F HC1-HL-DC100V-F Standard packing: Carton: 20 pcs.; Case: 200 pcs. ASCTB4E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e HC 3) PC board type Nominal coil voltage 6V AC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1-HP-AC6V-F HC1-HP-AC12V-F HC1-HP-AC24V-F HC1-HP-AC48V-F HC1-HP-AC100V-F HC1-HP-AC120V-F HC1-HP-AC200V-F HC1-HP-AC240V-F HC1-HP-DC6V-F HC1-HP-DC12V-F HC1-HP-DC24V-F HC1-HP-DC48V-F HC1-HP-DC100V-F 2 Form C Part No. HC2-HP-AC6V-F HC2-HP-AC12V-F HC2-HP-AC24V-F HC2-HP-AC48V-F HC2-HP-AC100V-F HC2-HP-AC120V-F HC2-HP-AC200V-F HC2-HP-AC240V-F HC2-HP-DC6V-F HC2-HP-DC12V-F HC2-HP-DC24V-F HC2-HP-DC48V-F HC2-HP-DC100V-F 3 Form C Part No. HC3-HP-AC6V-F HC3-HP-AC12V-F HC3-HP-AC24V-F HC3-HP-AC48V-F HC3-HP-AC100V-F HC3-HP-AC120V-F HC3-HP-AC200V-F HC3-HP-AC240V-F HC3-HP-DC6V-F HC3-HP-DC12V-F HC3-HP-DC24V-F HC3-HP-DC48V-F HC3-HP-DC100V-F 4 Form C Part No. HC4-HP-AC6V HC4-HP-AC12V HC4-HP-AC24V HC4-HP-AC48V HC4-HP-AC100V HC4-HP-AC120V HC4-HP-AC200V HC4-HP-AC240V HC4-HP-DC6V HC4-HP-DC12V HC4-HP-DC24V HC4-HP-DC48V HC4-HP-DC100V 4 Form C (twin) Part No. HC4D-HP-AC6V HC4D-HP-AC12V HC4D-HP-AC24V HC4D-HP-AC48V HC4D-HP-AC100V HC4D-HP-AC120V HC4D-HP-AC200V HC4D-HP-AC240V HC4D-HP-DC6V HC4D-HP-DC12V HC4D-HP-DC24V HC4D-HP-DC48V HC4D-HP-DC100V Standard packing: Carton: 20 pcs.; Case: 200 pcs. Note: Please add "-31" before "-F" in the part number when ordering the PC board type 0.9 mm width terminal (ex) HC1-HP-AC6V-31-F. 4) PC board type (with LED indication) Nominal coil voltage 6V AC 12V AC 24V AC 100/110V AC 110/120V AC 200/220V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1-HPL-AC6V-F HC1-HPL-AC12V-F HC1-HPL-AC24V-F HC1-HPL-AC100V-F HC1-HPL-AC120V-F HC1-HPL-AC200V-F HC1-HPL-DC6V-F HC1-HPL-DC12V-F HC1-HPL-DC24V-F HC1-HPL-DC48V-F HC1-HPL-DC100V-F 2 Form C Part No. HC2-HPL-AC6V-F HC2-HPL-AC12V-F HC2-HPL-AC24V-F HC2-HPL-AC100V-F HC2-HPL-AC120V-F HC2-HPL-AC200V-F HC2-HPL-DC6V-F HC2-HPL-DC12V-F HC2-HPL-DC24V-F HC2-HPL-DC48V-F HC2-HPL-DC100V-F 3 Form C Part No. HC3-HPL-AC6V-F HC3-HPL-AC12V-F HC3-HPL-AC24V-F HC3-HPL-AC100V-F HC3-HPL-AC120V-F HC3-HPL-AC200V-F HC3-HPL-DC6V-F HC3-HPL-DC12V-F HC3-HPL-DC24V-F HC3-HPL-DC48V-F HC3-HPL-DC100V-F 4 Form C Part No. HC4-HPL-AC6V HC4-HPL-AC12V HC4-HPL-AC24V HC4-HPL-AC100V HC4-HPL-AC120V HC4-HPL-AC200V HC4-HPL-DC6V HC4-HPL-DC12V HC4-HPL-DC24V HC4-HPL-DC48V HC4-HPL-DC100V 4 Form C (twin) Part No. HC4D-HPL-AC6V HC4D-HPL-AC12V HC4D-HPL-AC24V HC4D-HPL-AC100V HC4D-HPL-AC120V HC4D-HPL-AC200V HC4D-HPL-DC6V HC4D-HPL-DC12V HC4D-HPL-DC24V HC4D-HPL-DC48V HC4D-HPL-DC100V Standard packing: Carton: 20 pcs.; Case: 200 pcs. Note: Please add "-31" before "-F" in the part number when ordering the PC board type 0.9 mm width terminal (ex) HC1-HPL-AC6V-31-F. 5) TM type Nominal coil voltage 6V AC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1-HTM-AC6V-F HC1-HTM-AC12V-F HC1-HTM-AC24V-F HC1-HTM-AC48V-F HC1-HTM-AC100V-F HC1-HTM-AC120V-F HC1-HTM-AC200V-F HC1-HTM-DC6V-F HC1-HTM-DC12V-F HC1-HTM-DC24V-F HC1-HTM-DC48V-F HC1-HTM-DC100V-F 2 Form C Part No. HC2-HTM-AC6V-F HC2-HTM-AC12V-F HC2-HTM-AC24V-F HC2-HTM-AC48V-F HC2-HTM-AC100V-F HC2-HTM-AC120V-F HC2-HTM-AC200V-F HC2-HTM-DC6V-F HC2-HTM-DC12V-F HC2-HTM-DC24V-F HC2-HTM-DC48V-F HC2-HTM-DC100V-F 3 Form C Part No. HC3-HTM-AC6V-F HC3-HTM-AC12V-F HC3-HTM-AC24V-F HC3-HTM-AC48V-F HC3-HTM-AC100V-F HC3-HTM-AC120V-F HC3-HTM-AC200V-F HC3-HTM-DC6V-F HC3-HTM-DC12V-F HC3-HTM-DC24V-F HC3-HTM-DC48V-F HC3-HTM-DC100V-F 4 Form C Part No. HC4-HTM-AC6V HC4-HTM-AC12V HC4-HTM-AC24V HC4-HTM-AC48V HC4-HTM-AC100V HC4-HTM-AC120V HC4-HTM-AC200V HC4-HTM-DC6V HC4-HTM-DC12V HC4-HTM-DC24V HC4-HTM-DC48V HC4-HTM-DC100V 4 Form C (twin) Part No. HC4D-HTM-AC6V HC4D-HTM-AC12V HC4D-HTM-AC24V HC4D-HTM-AC48V HC4D-HTM-AC100V HC4D-HTM-AC120V HC4D-HTM-AC200V HC4D-HTM-DC6V HC4D-HTM-DC12V HC4D-HTM-DC24V HC4D-HTM-DC48V HC4D-HTM-DC100V Standard packing: Carton: 20 pcs.; Case: 200 pcs. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB4E 201201-T HC 2. Amber sealed type 1) Plug-in type Nominal coil voltage 6V AC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1E-H-AC6V-F HC1E-H-AC12V-F HC1E-H-AC24V-F HC1E-H-AC48V-F HC1E-H-AC100V-F HC1E-H-AC120V-F HC1E-H-AC200V-F HC1E-H-AC240V-F HC1E-H-DC6V-F HC1E-H-DC12V-F HC1E-H-DC24V-F HC1E-H-DC48V-F HC1E-H-DC100V-F 2 Form C Part No. HC2E-H-AC6V-F HC2E-H-AC12V-F HC2E-H-AC24V-F HC2E-H-AC48V-F HC2E-H-AC100V-F HC2E-H-AC120V-F HC2E-H-AC200V-F HC2E-H-AC240V-F HC2E-H-DC6V-F HC2E-H-DC12V-F HC2E-H-DC24V-F HC2E-H-DC48V-F HC2E-H-DC100V-F 4 Form C Part No. HC4E-H-AC6V HC4E-H-AC12V HC4E-H-AC24V HC4E-H-AC48V HC4E-H-AC100V HC4E-H-AC120V HC4E-H-AC200V HC4E-H-AC240V HC4E-H-DC6V HC4E-H-DC12V HC4E-H-DC24V HC4E-H-DC48V HC4E-H-DC100V 4 Form C (twin) Part No. HC4ED-H-AC6V HC4ED-H-AC12V HC4ED-H-AC24V HC4ED-H-AC48V HC4ED-H-AC100V HC4ED-H-AC120V HC4ED-H-AC200V HC4ED-H-AC240V HC4ED-H-DC6V HC4ED-H-DC12V HC4ED-H-DC24V HC4ED-H-DC48V HC4ED-H-DC100V 2 Form C Part No. HC2E-L-AC6V-F HC2E-L-AC12V-F HC2E-L-AC24V-F HC2E-L-AC48V-F HC2E-L-AC100V-F HC2E-L-AC120V-F HC2E-L-AC200V-F HC2E-L-AC240V-F HC2E-L-DC6V-F HC2E-L-DC12V-F HC2E-L-DC24V-F HC2E-L-DC48V-F HC2E-L-DC100V-F 4 Form C Part No. HC4E-L-AC6V HC4E-L-AC12V HC4E-L-AC24V HC4E-L-AC48V HC4E-L-AC100V HC4E-L-AC120V HC4E-L-AC200V HC4E-L-AC240V HC4E-L-DC6V HC4E-L-DC12V HC4E-L-DC24V HC4E-L-DC48V HC4E-L-DC100V 4 Form C (twin) Part No. HC4ED-L-AC6V HC4ED-L-AC12V HC4ED-L-AC24V HC4ED-L-AC48V HC4ED-L-AC100V HC4ED-L-AC120V HC4ED-L-AC200V HC4ED-L-AC240V HC4ED-L-DC6V HC4ED-L-DC12V HC4ED-L-DC24V HC4ED-L-DC48V HC4ED-L-DC100V 2 Form C Part No. HC2E-HP-AC6V-F HC2E-HP-AC12V-F HC2E-HP-AC24V-F HC2E-HP-AC48V-F HC2E-HP-AC100V-F HC2E-HP-AC120V-F HC2E-HP-AC200V-F HC2E-HP-AC240V-F HC2E-HP-DC6V-F HC2E-HP-DC12V-F HC2E-HP-DC24V-F HC2E-HP-DC48V-F HC2E-HP-DC100V-F 4 Form C Part No. HC4E-HP-AC6V HC4E-HP-AC12V HC4E-HP-AC24V HC4E-HP-AC48V HC4E-HP-AC100V HC4E-HP-AC120V HC4E-HP-AC200V HC4E-HP-AC240V HC4E-HP-DC6V HC4E-HP-DC12V HC4E-HP-DC24V HC4E-HP-DC48V HC4E-HP-DC100V 4 Form C (twin) Part No. HC4ED-HP-AC6V HC4ED-HP-AC12V HC4ED-HP-AC24V HC4ED-HP-AC48V HC4ED-HP-AC100V HC4ED-HP-AC120V HC4ED-HP-AC200V HC4ED-HP-AC240V HC4ED-HP-DC6V HC4ED-HP-DC12V HC4ED-HP-DC24V HC4ED-HP-DC48V HC4ED-HP-DC100V Standard packing: Carton: 20 pcs.; Case: 200 pcs. 2) Plug-in type (With LED indication) Nominal coil voltage 6V AC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1E-L-AC6V-F HC1E-L-AC12V-F HC1E-L-AC24V-F HC1E-L-AC48V-F HC1E-L-AC100V-F HC1E-L-AC120V-F HC1E-L-AC200V-F HC1E-L-AC240V-F HC1E-L-DC6V-F HC1E-L-DC12V-F HC1E-L-DC24V-F HC1E-L-DC48V-F HC1E-L-DC100V-F Standard packing: Carton: 20 pcs.; Case: 200 pcs. 3) PC board type Nominal coil voltage 6V AC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1E-HP-AC6V-F HC1E-HP-AC12V-F HC1E-HP-AC24V-F HC1E-HP-AC48V-F HC1E-HP-AC100V-F HC1E-HP-AC120V-F HC1E-HP-AC200V-F HC1E-HP-AC240V-F HC1E-HP-DC6V-F HC1E-HP-DC12V-F HC1E-HP-DC24V-F HC1E-HP-DC48V-F HC1E-HP-DC100V-F Standard packing: Carton: 20 pcs.; Case: 200 pcs. Note: Please add "-31" in the suffix of part number when ordering the PC board type 0.9 mm width terminal. (4 Form C, 4 Form C (twin) only) ASCTB4E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e HC 4) PC board type (With LED indication) Nominal coil voltage 6V AC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1E-PL-AC6V-F HC1E-PL-AC12V-F HC1E-PL-AC24V-F HC1E-PL-AC48V-F HC1E-PL-AC100V-F HC1E-PL-AC120V-F HC1E-PL-AC200V-F HC1E-PL-AC240V-F HC1E-PL-DC6V-F HC1E-PL-DC12V-F HC1E-PL-DC24V-F HC1E-PL-DC48V-F HC1E-PL-DC100V-F 2 Form C Part No. HC2E-PL-AC6V-F HC2E-PL-AC12V-F HC2E-PL-AC24V-F HC2E-PL-AC48V-F HC2E-PL-AC100V-F HC2E-PL-AC120V-F HC2E-PL-AC200V-F HC2E-PL-AC240V-F HC2E-PL-DC6V-F HC2E-PL-DC12V-F HC2E-PL-DC24V-F HC2E-PL-DC48V-F HC2E-PL-DC100V-F 4 Form C Part No. HC4E-PL-AC6V HC4E-PL-AC12V HC4E-PL-AC24V HC4E-PL-AC48V HC4E-PL-AC100V HC4E-PL-AC120V HC4E-PL-AC200V HC4E-PL-AC240V HC4E-PL-DC6V HC4E-PL-DC12V HC4E-PL-DC24V HC4E-PL-DC48V HC4E-PL-DC100V 4 Form C (twin) Part No. HC4ED-PL-AC6V HC4ED-PL-AC12V HC4ED-PL-AC24V HC4ED-PL-AC48V HC4ED-PL-AC100V HC4ED-PL-AC120V HC4ED-PL-AC200V HC4ED-PL-AC240V HC4ED-PL-DC6V HC4ED-PL-DC12V HC4ED-PL-DC24V HC4ED-PL-DC48V HC4ED-PL-DC100V Standard packing: Carton: 20 pcs.; Case: 200 pcs. Note: Please add "-31" in the suffix of part number when ordering the PC board type 0.9 mm width terminal. (4 Form C, 4 Form C (twin) only) 5) TM type Nominal coil voltage 6V AC 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 220/240V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1E-HTM-AC6V-F HC1E-HTM-AC12V-F HC1E-HTM-AC24V-F HC1E-HTM-AC48V-F HC1E-HTM-AC100V-F HC1E-HTM-AC120V-F HC1E-HTM-AC200V-F HC1E-HTM-AC240V-F HC1E-HTM-DC6V-F HC1E-HTM-DC12V-F HC1E-HTM-DC24V-F HC1E-HTM-DC48V-F HC1E-HTM-DC100V-F 2 Form C Part No. HC2E-HTM-AC6V-F HC2E-HTM-AC12V-F HC2E-HTM-AC24V-F HC2E-HTM-AC48V-F HC2E-HTM-AC100V-F HC2E-HTM-AC120V-F HC2E-HTM-AC200V-F HC2E-HTM-AC240V-F HC2E-HTM-DC6V-F HC2E-HTM-DC12V-F HC2E-HTM-DC24V-F HC2E-HTM-DC48V-F HC2E-HTM-DC100V-F 4 Form C Part No. HC4E-HTM-AC6V HC4E-HTM-AC12V HC4E-HTM-AC24V HC4E-HTM-AC48V HC4E-HTM-AC100V HC4E-HTM-AC120V HC4E-HTM-AC200V HC4E-HTM-AC240V HC4E-HTM-DC6V HC4E-HTM-DC12V HC4E-HTM-DC24V HC4E-HTM-DC48V HC4E-HTM-DC100V 4 Form C (twin) Part No. HC4ED-HTM-AC6V HC4ED-HTM-AC12V HC4ED-HTM-AC24V HC4ED-HTM-AC48V HC4ED-HTM-AC100V HC4ED-HTM-AC120V HC4ED-HTM-AC200V HC4ED-HTM-AC240V HC4ED-HTM-DC6V HC4ED-HTM-DC12V HC4ED-HTM-DC24V HC4ED-HTM-DC48V HC4ED-HTM-DC100V Standard packing: Carton: 20 pcs.; Case: 200 pcs. 3. Keep relay Nominal coil voltage 6V AC 12V AC 24V AC 48V AC 100V AC 6V DC 12V DC 24V DC 48V DC 100/110V DC Plug-in type (2c) Part No. HC2K-AC6V-F HC2K-AC12V-F HC2K-AC24V-F HC2K-AC48V-F HC2K-AC100V-F HC2K-DC6V-F HC2K-DC12V-F HC2K-DC24V-F HC2K-DC48V-F HC2K-DC100V-F PC board type (2c) Part No. HC2K-P-AC6V-F HC2K-P-AC12V-F HC2K-P-AC24V-F HC2K-P-AC48V-F HC2K-P-AC100V-F HC2K-P-DC6V-F HC2K-P-DC12V-F HC2K-P-DC24V-F HC2K-P-DC48V-F HC2K-P-DC100V-F Standard packing: Carton: 20 pcs.; Case: 200 pcs. Note: Please refer to the "Standards Chart" for product certification. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB4E 201201-T HC 4. With diode type (For DC) 1) Plug-in type Nominal coil voltage 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1-DC6V-D-F HC1-DC12V-D-F HC1-DC24V-D-F HC1-DC48V-D-F HC1-DC100V-D-F 2 Form C Part No. HC2-DC6V-D-F HC2-DC12V-D-F HC2-DC24V-D-F HC2-DC48V-D-F HC2-DC100V-D-F 3 Form C Part No. HC3-DC6V-D-F HC3-DC12V-D-F HC3-DC24V-D-F HC3-DC48V-D-F HC3-DC100V-D-F 4 Form C Part No. HC4-DC6V-D HC4-DC12V-D HC4-DC24V-D HC4-DC48V-D HC4-DC100V-D 4 Form C (twin) Part No. HC4D-DC6V-D HC4D-DC12V-D HC4D-DC24V-D HC4D-DC48V-D HC4D-DC100V-D 2 Form C Part No. HC2-L-DC6V-D-F HC2-L-DC12V-D-F HC2-L-DC24V-D-F HC2-L-DC48V-D-F HC2-L-DC100V-D-F 3 Form C Part No. HC3-L-DC6V-D-F HC3-L-DC12V-D-F HC3-L-DC24V-D-F HC3-L-DC48V-D-F HC3-L-DC100V-D-F 4 Form C Part No. HC4-L-DC6V-D HC4-L-DC12V-D HC4-L-DC24V-D HC4-L-DC48V-D HC4-L-DC100V-D 4 Form C (twin) Part No. HC4D-L-DC6V-D HC4D-L-DC12V-D HC4D-L-DC24V-D HC4D-L-DC48V-D HC4D-L-DC100V-D 2 Form C Part No. HC2-AC100V-R-F HC2-AC120V-R-F HC2-AC200V-R-F HC2-AC240V-R-F 3 Form C Part No. HC3-AC100V-R-F HC3-AC120V-R-F HC3-AC200V-R-F HC3-AC240V-R-F 4 Form C Part No. HC4-AC100V-R HC4-AC120V-R HC4-AC200V-R HC4-AC240V-R 4 Form C (twin) Part No. HC4D-AC100V-R HC4D-AC120V-R HC4D-AC200V-R HC4D-AC240V-R 2 Form C Part No. HC2-L-AC100V-R-F HC2-L-AC120V-R-F HC2-L-AC200V-R-F HC2-L-AC240V-R-F 3 Form C Part No. HC3-L-AC100V-R-F HC3-L-AC120V-R-F HC3-L-AC200V-R-F HC3-L-AC240V-R-F 4 Form C Part No. HC4-L-AC100V-R HC4-L-AC120V-R HC4-L-AC200V-R HC4-L-AC240V-R 4 Form C (twin) Part No. HC4D-L-AC100V-R HC4D-L-AC120V-R HC4D-L-AC200V-R HC4D-L-AC240V-R Standard packing: Carton: 20 pcs.; Case: 200 pcs. 2) Plug-in type (with LED indication) Nominal coil voltage 6V DC 12V DC 24V DC 48V DC 100/110V DC 1 Form C Part No. HC1-L-DC6V-D-F HC1-L-DC12V-D-F HC1-L-DC24V-D-F HC1-L-DC48V-D-F HC1-L-DC100V-D-F Standard packing: Carton: 20 pcs.; Case: 200 pcs. 5. With CR circuit type 1) Plug-in type 1 Form C Part No. HC1-AC100V-R-F HC1-AC120V-R-F HC1-AC200V-R-F HC1-AC240V-R-F Nominal coil voltage 100/110V AC 110/120V AC 200/220V AC 220/240V AC Standard packing: Carton: 20 pcs.; Case: 200 pcs. 2) Plug-in type (with LED indication) Nominal coil voltage 100/110V AC 110/120V AC 200/220V AC 220/240V AC 1 Form C Part No. HC1-L-AC100V-R-F HC1-L-AC120V-R-F HC1-L-AC200V-R-F HC1-L-AC240V-R-F Standard packing: Carton: 20 pcs.; Case: 200 pcs. * For sockets and terminal sockets, see page 87. RATING 1. Standard type 1) Coil data (1) AC coils (50/60Hz) Type Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) 6V AC Standard 12V AC 24V AC 48V AC 100/110V AC 110/120V AC 200/220V AC 80%V or less of nominal voltage (Initial) 30%V or more of nominal voltage (Initial) Nominal coil current [20%] (at 20C 68F) Coil inductance 50Hz 60Hz N.C. condition N.O. condition 224mA 200mA 0.078H 0.074H 111mA 56mA 28mA 13.4/14.7mA 12.2/13.5mA 6.7/7.4mA 100mA 50mA 25mA 12/13.2mA 10.9/11.9mA 6/6.6mA 0.312H 1.243H 4.974H 23.75H 27.19H 85.98H 0.295H 1.181H 4.145H 20.63H 25.57H 81.76H Nominal operating power 50Hz 60Hz 1.3VA 1.2VA Max. applied voltage (at 70C 158F) 110%V of nominal voltage Notes: 1. The relay operates in a range of 80% to 110% V of the voltage rating, but ideally, in consideration of temporary voltage fluctuations, it should be operated at the rated voltage. In particular, for AC operation, if the applied voltage drops to 80% V or more below the rated voltage, humming will occur and a large current will flow leading possibly to coil burnout. 2. The maximum applied voltage is the maximum voltage fluctuation value for the coil power supply. This value is not a permissible value for continuous operation. (This value differs depending on the ambient temperature. Please contact us for details.) ASCTB4E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e HC (2) DC coils Nominal coil voltage Type Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) 80%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) 6V DC Standard 12V DC 24V DC 48V DC 100/110V DC Nominal coil current [10%] (at 20C 68F) 150mA Coil resistance [10%] (at 20C 68F) 40 75mA 37mA 18.5mA 10/11mA 160 650 2,600 10,000 Nominal operating power Max. applied voltage (at 70C 158F) 0.9W 110%V of nominal voltage 1.0W Notes: 1. The coil resistance for DC operation is the value measured when the coil temperature is 20C 68F. Compensate 0.4% for every 1C change in temperature. 2. The relay operates in a range of 80% to 110% V of the voltage rating, but ideally, in consideration of temporary voltage fluctuations, it should be operated at the rated voltage. 3. For use with 200 V DC, connect a 10 K (5W) resistor, in series, to the 100 V DC relay. 4. The maximum applied voltage is the maximum voltage fluctuation value for the coil power supply. This value is not a permissible value for continuous operation. (This value differs depending on the ambient temperature. Please contact us for details.) 2) Specifications Characteristics Contact Rating Electrical characteristics Mechanical characteristics Item Arrangement Contact resistance (Initial) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Nominal operating power Min. switching capacity (Reference value)*1 Insulation resistance (Initial) Between open contacts Breakdown Between contact voltage sets (Initial) Between contact and coil Temperature rise (coil) (at 70C 158F) Operate time (at 20C 68F)*2 Release time (at 20C 68F)*2 Shock resistance Functional Destructive Vibration resistance Functional Destructive Mechanical Expected life Conditions Electrical Conditions for operation, transport and storage*3 Max. Operating speed Unit weight 1 Form C Specifications 2 Form C 3 Form C 4 Form C 4 Form C (twin) Max. 30 m (By voltage drop 6 V DC 1A) Ag alloy (cd free) + Au flash AgNi type + Au clad 10A 250V AC 7A 250V AC 7A 250V AC 5A 250V AC 3A 250V AC 2,500VA 1,750VA 1,750VA 1,250VA 750VA 10A 250VAC 7A 7A 5A AC (50Hz): 1.3VA, AC (60Hz): 1.2VA, DC: 0.9 to 1.1W 1mA 1V DC 3A 100A 1V DC Min. 1,000M (at 500V DC) Measurement at same location as "Breakdown voltage" section. 700 Vrms for 1min. (Detection current: 10mA.) 700 Vrms for 1min. (Detection current: 10mA.) 2,000 Vrms for 1min. (Detection current: 10mA.) Max. 80C 176F (By resistive method, nominal coil voltage) Max. 20ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 20ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 196 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.) Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 1 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 2 mm Min. 5x107: AC coil type (at 180 times/min.); Min. 108: DC coil type (at 180 times/min.) Min. 2x105 Min. 2x105 Min. 105 Min. 2x105 Min. 2x105 resistive load resistive load resistive load resistive load resistive load (at 20 times/min.) (at 20 times/min.) (at 20 times/min.) (at 20 times/min.) (at 20 times/min.) Ambient temperature: -50C to +70C -58F to +158F (without LED); -50C to +60C -58F to +140F (with LED) Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 times/min. (at max. rating) Approx. 30g 1.06 oz Notes: *1. This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load. *2. For the AC coil types, the operate/release time will differ depending on the phase. *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB4E 201201-T HC 3) Switching capacity and expected life (1) Electrical (at 20 times/min.) Load Voltage 1 Form C 2 Form C 3 Form C 4 Form C 4 Form C (twin) AC DC Resistive (cos = 1) 125V AC 250V AC 10A 10A 7A 7A 5A 5A 7A 7A 5A 5A 3A 3A 7A 7A -- -- 5A 5A 5A 5A 3A 3A 2A 2A 3A 3A Inductive (cos 0.4) 125V AC 250V AC 5A 3A 3A 2.5A 2A 1.5A 3.5A 2A 2.5A 1.5A 1.5A 1A -- -- 3.5A 2A -- -- 2A 1A 1A 0.8A 0.5A 0.4A 1A 0.8A Resistive 30V DC -- 3A -- -- 3A -- -- -- 3A -- 3A -- 3A Inductive 30V DC -- 1A -- -- 0.6A -- -- -- 0.4A -- 0.4A -- -- Expected life Min. 2x105 Min. 5x105 Min. 106 Min. 2x105 Min. 5x105 Min. 106 Min. 105 Min. 2x105 Min. 5x105 Min. 2x105 Min. 5x105 Min. 106 Min. 2x105 (2) Mechanical (at 180 times/min.) AC coil type: Min. 5x107; DC coil type: Min. 108 2. Amber sealed type 1) Coil data Same coil data as HC relay standard type. Please refer to standard type information. 2) Specifications Characteristics Contact Rating Electrical characteristics Expected life Conditions Specifications 2 Form C 4 Form C 4 Form C (twin) 2 Form C 4 Form C 4 Form C 3A 250V AC 2A 250V AC 1A 250V AC 700VA 500VA 250VA 250VAC 250VAC 250VAC 3A 2A 1A 1mA 100mV DC 100A 100mV DC Max. 90C 194F (By resistive method, nominal voltage) Min. 2x105 resistive load (at 20 times/min.) Ambient temperature: -40C to +60C -40F to +140F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 760mmHg20% (1,013mb20%) Item 1 Form C 1 Form C 5A 250V AC 1,250VA 250VAC 5A Arrangement Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Temperature rise (coil) (at 60C 140F) Electrical Conditions for operation, transport and storage*2 Ambient air pressure Notes: Other specifications are same as standard types. *1. This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load. *2. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. 3) Switching capacity and expected life (1) Electrical (at 20 times/min.) Load Voltage HC1E HC2E HC4E HC4ED (4 Form C twin) AC Resistive (cos = 1) 125V AC 250V AC 5A 5A 3A 2A 1A 3A 2A 1A DC Inductive (cos 0.4) 125V AC 250V AC -- -- -- -- -- -- -- -- Resistive 30V DC 3A Inductive 30V DC 1A Expected life 2A 2A -- 0.7A 0.6A -- Min. 2x105 Min. 2x105 Min. 2x105 Min. 2x105 (2) Mechanical (at 180 times/min.) AC coil type: Min. 5x107; DC coil type: Min. 108 ASCTB4E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e HC 3. Keep relay 1) Coil data (1) AC coils (50/60Hz) Contact arrangement Nominal coil voltage Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 80%V or less of nominal voltage (Initial) 80%V or less of nominal voltage (Initial) Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 80%V or less of nominal voltage (Initial) 80%V or less of nominal voltage (Initial) Nominal operating current [10%] (at 20C 68F) 6V AC 2 Form C 12V AC 24V AC 48V AC 100V AC Max. applied voltage (at 50C 122F) Nominal operating power Set coil 206mA Reset coil 103mA Set coil 1.23VA Reset coil 0.62VA 100mA 51mA 25.2mA 13.3mA 52mA 21.4mA 18.5mA 7.1mA 1.20VA 1.22VA 1.20VA 1.33VA 0.62VA 0.51VA 0.88VA 0.71VA 110%V of nominal voltage (2) DC coils Contact arrangement Nominal coil voltage Nominal operating current [10%] (at 20C 68F) 6V DC 2 Form C 12V DC 24V DC 48V DC 100V DC Coil resistance [10%] (at 20C 68F) Nominal operating power Set coil 207mA Reset coil 107mA Set coil 29 Reset coil 56 Set coil 1.24W Reset coil 0.64W 100mA 51.1mA 25.3mA 15.6mA 52.2mA 25.5mA 13.7mA 5.8mA 120 470 1,897 6,410 230 941 3,504 17,241 1.20W 1.23W 1.21W 1.56W 0.63W 0.61W 0.66W 0.58W Max. applied voltage (at 50C 122F) 110%V of nominal voltage Notes: 1. The allowable coil resistance range is 10% when within 1,000 and 15% when. 1,000 or higher. 2. The maximum applied voltage is the maximum voltage fluctuation value for the coil power supply. This value is not a permissible value for continuous operation. (This value differs depending on the ambient temperature. Please contact us for details.) 2) Specifications Characteristics Contact Rating Electrical characteristics Mechanical characteristics Expected life Conditions Item Contact resistance (Initial) Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching current Nominal operating power Min. switching capacity (Reference value)*1 Breakdown voltage (Initial) Between contact and coil Temperature rise (coil) Set time/Reset time (at 20C 68F) Specifications Max. 50 m (By voltage drop 6 V DC 1A) 3A 250V AC 750VA 3A Set coil: 1.20VA to 1.33VA; Reset coil: 0.51VA to 0.88VA 100A 100mV DC Shock resistance Min. 98m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.) Functional Mechanical 1,500 Vrms for 1min. Set coil: Max. 80C 176F; Reset coil: Max. 50C 122F (at nominal coil voltage) Approx. 20ms/30ms (at nominal coil voltage) Min. 107 (at 180 times/min.) Min. 2x105 rated load (at 20 times/min.) -40C to +50C -40F to +122F (Not freezing and condensing at low temperature) Electrical Ambient temperature Notes: *1. This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load. *2. Other specifications are same as standard type HC relay. Please see the standard type HC relay. *3. Please maintain (reset) the relay more than once a year. Leaving it in the set position for long periods of time will cause the magnet to attenuate over the years. This will decrease the holding power and cause failure of the set position. 4. With diode type (For DC) 1) Coil data Same coil data as HC relay standard type for DC. Please refer to standard type information. Please connect DC coil type built-in diode correctly by verifying the coil polarity. 2) Specifications Characteristics Conditions Item Conditions for operation, transport and storage* Specifications Ambient temperature: -50C to +60C -58F to +140F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Notes: Other specifications are same as standard type HC relay. Please see the standard type HC relay. * The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. 5. With CR circuit type 1) Coil data Same coil data as HC relay standard type for AC. Please refer to standard type information. 2) Specifications Characteristics Electrical characteristics Temperature rise (coil) Item Conditions Conditions for operation, transport and storage* Specifications Max. 90C 194F (By resistive method, nominal voltage, rated current at 60C 140F) Ambient temperature: -50C to +60C -58F to +140F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Notes: Other specifications are same as standard type HC relay. Please see the standard type HC relay. * The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB4E 201201-T HC REFERENCE DATA Standard type 1. Life curve 2.-(1) Switching capacity range (single contact type) Load: 250 V AC resistive load Mechanical life (DC type) 250 Mechanical life (AC type) 500 400 100 HC4c 250 100 HC2c, 3c 1c 300 AC voltage, V 5,000 AC voltage, V Life, x104 times 10,000 2.-(2) Switching capacity range (4-pole bifurcated (twin) contact type) (250 V AC cos = 1) 100mV 10 2c HC1c 200 3c 100 4c 4 6 8 10 1mA 10mA Load current, A 3.-(1) Coil temperature rise (1 Form C, AC type) (See note.) Measured portion: Inside the coil Ambient temperature: 30C 86F 100 100 90 90 80 10A 70 7A 5A 2A 0A 60 50 40 100A 5A 10A 7A 3.-(2) Coil temperature rise (2 Form C, AC type) Temperature rise, C Temperature rise, C Measured portion: Inside the coil Ambient temperature: 25C 77F 1A AC current (See note.) Measured portion: Inside the coil Ambient temperature: 18C 64F 10A 80 5A 70 0A 60 50 40 50 40 20 10 10 0 0 90 100 110 0 120 0A 60 10 80 5A 70 30 120 7A 80 20 110 80 Coil applied voltage, %V Coil applied voltage, %V 90 100 Measured portion: Inside the coil Ambient temperature: 15 to 21C 59 to 70F (See note.) Measured portion: Inside the coil Ambient temperature: 29C 84F Measured portion: Inside the coil Ambient temperature: 29C 84F 120 5A 100 3A 80 1A 100 100 90 90 80 70 60 10A 5A 0A 50 40 60 40 30 20 20 20 10 10 0 0 100 110 120 80 90 100 110 120 Coil applied voltage, %V 3.-(7) Coil temperature rise (3 Form C, DC type) 3.-(8) Coil temperature rise (4 Form C, DC type) Measured portion: Inside the coil Ambient temperature: 29C 84F Measured portion: Inside the coil Ambient temperature: 17 to 18C 62 to 64F 100 90 90 80 7A 70 5A 60 0A 50 40 Temperature rise, C 100 80 90 100 110 120 Coil applied voltage, %V When the nominal voltage is applied to AC 120 or 240 V coil types respectively, the figures of coil temperature rise increase by approx. 10 degrees to the ones shown on each graph. 5A 70 60 3A 1A 50 40 30 20 20 0 0 Note: Coil temperature rise 80 30 10 5A 0A 50 40 90 7A 70 30 80 120 80 60 Coil applied voltage, %V Temperature rise, C Temperature rise, C 140 Temperature rise, C 3.-(6) Coil temperature rise (2 Form C, DC type) Temperature rise, C 3.-(5) Coil temperature rise (1 Form C, DC type) 160 110 Coil applied voltage, %V 3.-(4) Coil temperature rise (4 Form C, AC type) 180 (See note.) 90 20 100 10A 100 30 90 3A 3.-(3) Coil temperature rise (3 Form C, AC type) 30 80 1A AC current Temperature rise, C 2 10 80 90 100 110 120 0 Coil applied voltage, %V ASCTB4E 201201-T Panasonic Corporation 80 90 100 110 120 Coil applied voltage, %V Automation Controls Business Unit industrial.panasonic.com/ac/e HC Amber sealed type 1.-(1) Switching capacity range (single contact type) 1.-(2) Switching capacity range (4-pole bifurcated (twin) contact type) 2.-(1) Coil temperature rise (1 Form C AC type) Measured portion: Inside the coil Ambient temperature: 30C 86F 100V Temperature rise, C 250V AC voltage, V AC voltage, V 100 250 100 HC4E 10V 100mV HC2E 90 80 70 5A 60 50 40 30 20 HC1E 10 10mA 100A 1A 2A 3A 5A 10A AC current 1A 3A 0 10A 80 AC current 90 100 110 120 Voltage applied to coil, %V 2.-(3) Coil temperature rise (4 Form C AC type) 2.-(4) Coil temperature rise (1 Form C DC type) Measured portion: Inside the coil Ambient temperature: 30C 86F Measured portion: Inside the coil Ambient temperature: 30C 86F Measured portion: Inside the coil Ambient temperature: 30C 86F 100 100 90 90 80 70 3A 60 50 40 (See note.) 100 90 2A 80 70 60 50 40 80 70 60 50 30 30 20 20 20 10 10 80 0 90 100 110 120 Voltage applied to coil, %V 10 80 90 100 110 120 Voltage applied to coil, %V 2.-(5) Coil temperature rise (2 Form C DC type) Note: Coil temperature rise Measured portion: Inside the coil Ambient temperature: 30C 86F When the nominal voltage is applied to AC 120 or 240 V coil types respectively, the figures of coil temperature rise increase by approx. 10 degrees to the ones shown on each graph. 100 90 5A 0A 40 30 0 Temperature rise, C Temperature rise, C (See note.) Temperature rise, C Temperature rise, C 2.-(2) Coil temperature rise (2 Form C AC type) 0 80 90 100 110 120 Voltage applied to coil, %V 80 70 60 5A 50 40 30 20 10 0 80 90 100 110 120 Voltage applied to coil, %V Keep relay Coil temperature rise Tested sample: HC2K-DC12V, 2 pcs Measured portion: Inside the coil Ambient temperature: 28C 82.4F 100 Temperature rise, C 90 80 70 3A 0A 60 50 40 30 20 10 0 80 90 100 110 120 Coil applied voltage, %V Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB4E 201201-T HC With diode type (For DC) 1.-(1) DC coil surge voltage waveform (without diode) 1.-(2) DC coil surge voltage waveform (with diode) Diode characteristics; Reverse breakdown voltage: 1,000V, Forward current: 1A ON OFF ON OFF 260V + To digital memory 12V DC + - To digital memory 12V DC - breakdown voltage: 1,000 V (Reverse ( Forward current: 1 A With CR circuit type 1.-(1) AC coil surge voltage waveform (with CR circuit) 1.-(2) AC coil surge voltage waveform (without CR circuit) Tested sample: HC4-AC200V-R Tested sample: HC4-AC200V 282V 282V 1.8ms 55V 3.2ms 200V AC 1.5ms 630V To digital memory DIMENSIONS (mm inch) To digital memory 200V AC The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e Standard and Amber sealed types 1) Plug-in type 1 Form C External dimensions CAD Data 20.8 .819 1.7 .067 1.7 .067 Schematic (Bottom view) Standard type 27.2 1.071 0.6 .024 2 7 13 14 35.2 1.386 1 .039 LED AC type 6.4 .252 2.54 .100 13.35 .526 4.45 4.41 .175 .174 2 7 12 13 14 2 0.5 .020 13 ( ) 7 12 LED DC type 2 12 14 ( ) 13 (-) 4.06 .160 6.35 .250 6.35 .250 General tolerance: 0.3 .012 ASCTB4E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e 7 12 14 (+) HC 2 Form C External dimensions CAD Data 20.8 .819 1.7 .067 1.7 .067 Schematic (Bottom view) Standard type 27.2 1.071 0.6 .024 1 5 9 13 4 8 12 14 35.2 1.386 LED AC type 1 .039 1 5 9 13 ( ) 6.4 .252 2.54 .100 4.41 13.35 .174 .526 1 4 5 8 9 12 13 14 0.5 .020 LED DC type 4 8 12 1 5 9 13 14 ( ) 4 8 12 14 (+) (-) 4.06 .160 6.35 .250 6.35 .250 General tolerance: 0.3 .012 3 Form C External dimensions CAD Data 20.8 .819 1.7 .067 1.7 .067 Schematic (Bottom view) Standard type 27.2 1.071 0.6 .024 1 2 3 4 5 8 9 7 35.2 1.386 LED AC type 6.4 .252 0.5 .020 2.54 .100 4.41 13.35 .174 .526 2 3 4 5 6 7 8 9 14 13 14 13 1 .039 1 6 2 3 1 2 3 4 5 8 6 4 9 7 5 8 9 7 13 ( ) 4.06 .160 6.35 .250 6.35 .250 LED DC type 1 6 13 14 ( ) 14 (+) (-) General tolerance: 0.3 .012 4 Form C and 4-pole bifurcated (twin) External dimensions CAD Data 20.8 .819 1.7 .067 1.7 .067 Schematic (Bottom view) Standard type 27.2 1.071 0.6 .024 35.2 1.386 2 3 4 6 7 8 9 10 11 12 13 14 4 7 8 9 10 11 12 14 LED DC type 1 2 3 4 1 2 3 4 5 6 7 8 5 6 7 8 9 10 11 12 9 10 11 12 0.5 .020 2.54 .100 4.41 13.35 .174 .526 5 3 6 LED AC type 6.4 .252 1 2 5 13 1 .039 4.45 .175 1 13 ( ) 4.06 .160 6.35 .250 6.35 .250 14 ( ) 13 (-) 14 (+) General tolerance: 0.3 .012 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB4E 201201-T HC 2) PC board type 4 Form C External dimensions CAD Data 20.8 .819 1.7 .067 1.7 .067 The diagrams show the external dimensions of the 4 Form C and 4-pole bifurcated (twin) types. For 1 Form C, 2 Form C, and 3 Form C, see diagrams at plug-in types (only the terminals are different). Types with 0.9 mm terminal width are also available. 27.2 1.071 0.6 .024 35.2 1.386 1 .039 1.5 .059 13.35 .526 4.45 .175 1 2 3.5 .138 1.5 .059 0.5 .020 4.41 .174 3 4.06 .160 6.35 .250 6.35 .250 4 5 6 7 8 9 10 11 12 13 14 General tolerance: 0.3 .012 PC board pattern Schematic 1 Form C 2 Form C 4.1 .161 4.1 .161 10.4 .409 16.8 .661 4.45 .175 8.9 .350 13.35 .526 3 Form C 5-2 dia. hole 5-.079 dia. 13.35 .526 4.1 .161 4.1 .161 10.4 .409 16.8 .661 10.4 .409 16.8 .661 10.4 .409 16.8 .661 8-2 dia. hole 8-.079 dia. 13.35 .526 Same schematic as plug-in type HC relay 4 Form C 11-2 dia. hole 11-.079 dia. 4.45 .175 8.9 .350 13.35 .526 14-2 dia. hole 14-.079 dia. Tolerance: 0.1 .004 3) TM type 4 Form C External dimensions CAD Data 20.6 .811 43 1.693 The diagrams show the external dimensions of the 4 Form C and 4-pole bifurcated (twin) types. For 1 Form C, 2 Form C, and 3 Form C, see diagrams at plug-in types (only the terminals are different). 2 .079 34.2 1.346 1 .039 6.4 .252 2.54 0.5 .100 .020 13.35 .526 4.45 .175 4.31 .170 3.6 .142 1 2 3 4 5 6 7 8 9 10 11 12 13 14 4.06 .160 37.6 6.35 27 1.480 .250 1.063 6.35 .250 General tolerance: 0.3 .012 Chassis (Panel) cutout Chassis (Panel) cutout in tandem mounting 23 .906 2-3.6 dia. 2-.142 dia. 37.6 1.480 37.6 1.480 Tolerance: 0.1 .004 Schematic Same schematic as plug-in type HC relay Be aware that there is no LED indicator with CR circuit and built-in diode types. ASCTB4E 201201-T 21 .827 2 .079 21 .827 Notes: 1. In mounting, use M3 screws and M3 washers. 2. When mounting TM types, use washers to prevent damage or distortion to the polycarbonate cover. 3. When tightening fixing screws, the optimum torque range should be 0.294 to 0.49 N*m, (3 to 5 kgf*cm). Moreover, use washers to prevent loosening. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e HC Keep relay Plug-in type (2 Form C) External dimensions CAD Data Schematic (Bottom view) DC type 27.4 1.079 21 .827 - 35.2 1.386 - 4 1 5 8 5 9 13 10 2.54 .100 2 3 4 6 7 8 9 10 11 12 13 14 Set 9 + 13 + 8 10 11 Reset 12 14 Set 0.5 .020 4.51 .178 5 12 4 6.9 .272 6.4 .252 1 11 Reset 1 .039 13.35 .526 4.45 .175 AC type 1 4.06 .160 6.35 .250 6.35 .250 14 General tolerance: 0.3 .012 PC board type (2 Form C) External dimensions CAD Data Schematic (Bottom view) DC type 27.2 1.071 21 .827 - 35.2 1.386 - 1 .039 3.5 .138 1 5 8 5 10 9 13 11 Reset 12 14 Set 9 + 13 + 4 8 10 11 Reset 12 14 Set Idle terminal (hole needed) 21 .827 0.5 .020 4.51 .178 1 2 3 4 5 6 7 8 9 10 11 12 13 4 PC board pattern (Bottom view) 5.0 .197 1.5 .059 13.35 .526 4.45 .175 AC type 1 10.4 .409 16.8 27.4 .661 1.079 4.06 .160 6.35 .250 6.35 .250 14 14-2 dia. hole 14-.079 dia. hole 4.45 .175 General tolerance: 0.3 .012 8.9 .350 13.35 .526 4.1 .161 Tolerance: 0.1 .004 With diode type (For DC) Same dimensions as HC relay standard/plug-in type CAD Data Schematic Without LED indicator With LED indicator 1 2 3 4 1 2 3 5 6 7 8 5 6 7 8 9 10 11 12 9 10 11 12 13- +14 13- 4 +14 LED Protection (surge-absorbing) diode Protection (surge-absorbing) diode Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB4E 201201-T HC With CR circuit type Plug-in type 4 Form C External dimensions CAD Data 21 .827 27.4 1.079 Diagrams show the external dimensions and schematic of the 4 Form C and 4-pole bifurcated (twin) types. For the 1 Form C, 2 Form C, and 3 Form C types, only the terminals differ. The dimensions of the terminal are the same as for standard type HC relays. 52.3 2.059 1 .039 6.4 .252 2.54 .100 1 2 3 4 5 6 7 8 9 10 11 12 13 0.5 .020 4.41 .174 4.06 .160 6.35 .250 6.35 .250 14 4.45 .175 13.35 .526 General tolerance: 0.3 .012 Schematic Without LED indicator With LED indicator 1 2 3 4 1 2 3 5 6 7 8 5 6 7 8 9 10 11 12 9 10 11 12 14 13 13 4 14 SAFETY STANDARDS Item 1 Form C UL/C-UL (Recognized) File No. Contact rating E43028 10A 250V AC 1/3HP 125, 250V AC 3A 30V DC E43028 HC Standard E43028 3 Form C E43028 4 Form C twin E43149 E43028 1 Form C E43028 2 Form C HC Amber E43028 4 Form C 4 Form C twin HC keep ASCTB4E 201201-T LR26550 etc. 7A 250V AC 1/6HP 125, 250V AC 3A 30V DC 7A 250V AC / HP 125, 250V AC 3A 30V DC 5A 250V AC 1/10HP 125, 250V AC 3A 30V DC 3A 250V AC 3A 30V DC 6A 250V AC 1/6HP 125, 250V AC 3A 30V DC 4A 250V AC 1/10HP 125, 250V AC 3A 30V DC 2A 250V AC 1/20HP 125, 250V AC 2A 30V DC 1A 250V AC 1A 30V DC LR26550 etc. LR26550 etc. 7A 250V AC 1/6HP 125, 250V AC 3A 30V DC 5A 250V AC 1/10HP 125, 250V AC 3A 30V DC 3A 250V AC 3A 30V DC 6A 250V AC 1/6HP 125, 250V AC 3A 30V DC 4A 250V AC 1/10HP 125, 250V AC 3A 30V DC 2A 250V AC 1/20HP 125, 250V AC 2A 30V DC 1A 250V AC 1A 30V DC LR26550 etc. 3A 250V AC 3A 30V DC 16 4 Form C E43149 E43149 CSA (Certified) Contact rating 10A 250V AC 1/3HP 125, 250V AC 3A 30V DC 7A 250V AC / HP 125, 250V AC 3A 30V DC 16 2 Form C File No. LR26550 etc. 3A 250V AC 3A 30V DC LR26550 etc. LR26550 etc. LR26550 etc. LR26550 etc. LR26550 etc. Panasonic Corporation File No. 40017406 40017406 -- 40017406 VDE (Certified) Contact rating 10A 250V AC (cos =1.0) 3A 250V AC (cos =0.4) 3A 30V DC (0ms) 7A 250V AC (cos =1.0) 2A 250V AC (cos =0.4) 3A 30V DC (0ms) -- 5A 65V AC (cos =1.0) 3A 65V AC (cos =0.4) 3A 30V DC (0ms) TV rating (UL/CSA) File No. Rating UL TV-3 E43149 CSA LR26550 UL TV-3 E43149 CSA LR26550 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Automation Controls Business Unit Remarks Approved (DC type only) industrial.panasonic.com/ac/e HC UL/C-UL (Recognized) File No. Contact rating E43028 10A 250V AC 1/3HP 125, 250V AC 1 Form C 3A 30V DC E43028 7A 250V AC 1/6HP 125, 250V AC 2 Form C 3A 30V DC HC with E43028 7A 250V AC diode type 1/6HP 125, 250V AC 3 Form C (For DC) 3A 30V DC E43028 5A 250V AC 1/10HP 125, 250V AC 4 Form C 3A 30V DC E43149 3A 250V AC 4 Form C twin 3A 30V DC Item E43028 1 Form C E43028 2 Form C HC with CR circuit 3 Form C E43028 E43028 4 Form C 4 Form C twin E43149 10A 250V AC 1/3HP 125, 250V AC 3A 30V DC 7A 250V AC 1/6HP 125, 250V AC 3A 30V DC 7A 250V AC 1/6HP 125, 250V AC 3A 30V DC 5A 250V AC 1/10HP 125, 250V AC 3A 30V DC 3A 250V AC 3A 30V DC File No. LR26550 etc. LR26550 etc. LR26550 etc. LR26550 etc. LR26550 etc. LR26550 etc. LR26550 etc. LR26550 etc. LR26550 etc. LR26550 etc. CSA (Certified) Contact rating 10A 250V AC 1/3HP 125, 250V AC 3A 30V DC 7A 250V AC 1/6HP 125, 250V AC 3A 30V DC 7A 250V AC 1/6HP 125, 250V AC 3A 30V DC 5A 250V AC 1/10HP 125, 250V AC 3A 30V DC 3A 250V AC 3A 30V DC 10A 250V AC 1/3HP 125, 250V AC 3A 30V DC 7A 250V AC 1/6HP 125, 250V AC 3A 30V DC 7A 250V AC 1/6HP 125, 250V AC 3A 30V DC 5A 250V AC 1/10HP 125, 250V AC 3A 30V DC 3A 250V AC 3A 30V DC File No. VDE (Certified) Contact rating TV rating (UL/CSA) File No. Rating -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Remarks NOTES 1. Amber sealed type When mounting TM types, use washers to prevent damage or distortion to the polycarbonate cover. When tightening fixing screws, the optimum torque range should be 0.294 to 0.49 N*m, (3 to 5 kgf*cm). If screws are over tightened, the cover may distort, resulting in poor sealing. Moreover, to prevent loosening, use washers. 2. Keep relay 1) The schematic differs from that in the standard type 4 Form C HC relay. Follow the schematic on the cover sticker. 2) Conform with the schematic for the DC type, which has a polarized coil. 3) Because retention characteristics vary according to the waveform of the voltage applied to the coil, do your best to avoid capacitor driving. In capacitor driving, use a capacitor of 300 F or more. 4) Ensure that the minimum pulse width of voltage applied to coil is greater than 150 ms. 3. Diode characteristics 1) Reverse breakdown voltage: 1,000 V 2) Forward current: 1 A 4. Diode and CR built-in type Since the diode and CR inside the relay coil are designed to absorb the counter emf, the element may be damaged if a large surge, etc., is applied to the diode and CR. If there is the possibility of a large surge voltage from the outside, please implement measures to absorb it. 5. Please connect DC coil types with LED and built-in diode correctly by verifying the coil polarity ("+" and "- "). Connecting with reverse polarity will cause the LED not to light and damage the built-in diode due to its specification. For Cautions for Use. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB4E 201201-T