TCLT110. Series www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package 5 4 FEATURES 3 * SMD low profile 5 pin package * Isolation test voltage 5000 VRMS * CTR flexibility available see order information * Special construction 2 1 * Extra low coupling capacitance * Connected base 17295-1 * DC input with transistor output * Creepage distance > 8 mm DESCRIPTION * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC The TCLT110. series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 5-lead SOP-6L package. AGENCY APPROVALS * UL1577, file no. E76222 APPLICATIONS * CSA E76222 22.2 bulletin 5A * Switchmode power supplies * BSI IEC 60950 IEC 60065 * Computer peripheral interface * DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 (pending), available with option 1 * Microprocessor system interface * FIMKO Note * See the safety standard approval list "Agency Table" for more detailed information. ORDERING INFORMATION T C L T 1 1 0 SOP-6L5 # 10.2 mm PART NUMBER AGENCY CERTIFIED/PACKAGE CTR (%) 5 mA UL, cUL, VDE, BSI, FIMKO 50 to 600 SOP-6L5 10 mA 5 mA 63 to 125 100 to 200 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400 TCLT1100 TCLT1102 TCLT1103 TCLT1104 TCLT1105 TCLT1106 TCLT1107 TCLT1108 TCLT1109 Document Number: 83514 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 22-Sep-11 TCLT110. Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current tP 10 s IFSM 1.5 A Pdiss 100 mW Tj 125 C Collector emitter voltage VCEO 70 V Emitter collector voltage VECO 7 V Power dissipation Junction temperature OUTPUT Collector current IC 50 mA ICM 100 mA Pdiss 150 mW Tj 125 C Isolation test voltage (RMS) VISO 5000 VRMS Total power dissipation Ptot 250 mW Operating ambient temperature range Tamb - 55 to + 100 C Storage temperature range Tstg - 55 to + 125 C Soldering temperature (1) Tsld 260 C Collector peak current tP/T = 0.5, tP 10 ms Power dissipation Junction temperature COUPLER Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Wave soldering three cycles are allowed. Also refer to "Assembly Instruction" (www.vishay.com/doc?80054). ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. 1.6 UNIT INPUT Forward voltage Junction capacitance IF = 50 mA VF 1.25 VR = 0 V, f = 1 MHz Cj 50 IC = 1 mA VCEO 70 7 V pF OUTPUT Collector emitter voltage Emitter collector voltage V IE = 100 A VECO VCE = 20 V, IF = 0 A ICEO Collector emitter saturation voltage IF = 10 mA, IC = 1 mA VCEsat Cut-off frequency VCE = 5 V, IF = 10 mA, RL = 100 fc 110 kHz f = 1 MHz Ck 0.3 pF Collector emitter leakage current V 10 100 nA 0.3 V COUPLER Coupling capacitance Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Document Number: 83514 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 22-Sep-11 TCLT110. Series www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. VCE = 5 V, IF = 5 mA TCLT1100 CTR 50 TCLT1102 CTR 63 125 % TCLT1103 CTR 100 200 % VCE = 5 V, IF = 10 mA VCE = 5 V, IF = 1 mA IC/IF VCE = 5 V, IF = 5 mA TYP. MAX. UNIT 600 % TCLT1104 CTR 160 TCLT1102 CTR 22 320 % TCLT1103 CTR TCLT1104 CTR TCLT1105 CTR 50 150 % TCLT1106 CTR 100 300 % TCLT1107 CTR 80 160 % TCLT1108 CTR 130 260 % TCLT1109 CTR 200 400 % 45 % 34 70 % 56 100 % SAFETY AND INSULATION RATED PARAMETERS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Partial discharge test voltage routine test 100 %, ttest = 1 s Vpd 2.0 Partial discharge test voltage lot test (sample test) tTr = 60 s, ttest = 10 s, (see figure 2) VIOTM 8 kV Vpd 1.68 kV kV VIO = 500 V RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 VIO = 500 V, Tamb = 150 C (construction test only) RIO 109 Isi 130 mA Pso 265 mW VIOTM 8 kV Tsi 150 C Clearance distance 8.0 mm Creepage distance 8.0 mm Insulation distance (internal) 0.40 mm Insulation resistance Forward current Power dissipation Rated impulse voltage Safety temperature Note * According to DIN EN 60747-5-2 (VDE 0884) (see figure 2). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. VIOTM 300 t1, t2 t3 , t4 ttest tstres Phototransistor Pso (mW) 250 200 = 1 s to 10 s =1s = 10 s = 12 s Vpd 150 VIOWM VIORM 100 IR-diode Isi (mA) 50 0 0 0 94 9182-2 25 50 75 100 125 Tsi - Safety Temperature (C) Fig. 1 - Derating Diagram 150 13930 t3 ttest t4 t1 tTr = 60 s t2 t stres t Fig. 2 - Test Pulse Diagram for Sample Test According to DIN EN 60747-5-2 (VDE 0884); IEC 60747-5-5 Document Number: 83514 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 22-Sep-11 TCLT110. Series www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Delay time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) MIN. TYP. MAX. UNIT td 3.0 s Rise time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) tr 3.0 s Turn-on time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) ton 6.0 s Storage time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) ts 0.3 s Fall time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) tf 4.7 s Turn-off time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) toff 5.0 s Turn-on time VS = 5 V, IF = 10 mA, RL = 1 k, (see figure 4) ton 9.0 s Turn-off time VS = 5 V, IF = 10 mA, RL = 1 k, (see figure 4) toff 10.0 s IF IF 0 +5V IF 0 I C = 2 mA; adjusted through input amplitude tp IC t 100 % 90 % R G = 50 tp = 0.01 T t p = 50 s Channel I Channel II 50 Oscilloscope R L = 1 M C L = 20 pF 10 % 0 tr td 100 t on tp td tr t on (= td + tr) 95 10804 Fig. 3 - Test Circuit, Non-Saturated Operation IF Pulse duration Delay time Rise time Turn-on time ts tf t off ts tf t off (= ts + tf) t Storage time Fall time Turn-off time 96 11698 Fig. 5 - Switching Times +5V I F = 10 mA 0 IC R G = 50 tp = 0.01 T t p = 50 s Channel I Channel II 50 Oscilloscope R L 1 M C L 20 pF 1 k 95 10843 Fig. 4 - Test Circuit, Saturated Operation Document Number: 83514 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 22-Sep-11 TCLT110. Series www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 2.30 max. 4.10 max. 10.20 3.80 + 0.30 - 0.40 0.20 2.00 0.10 0.10 + 0.10 - 0.05 7.50 0.20 0.45 0.1 0.70 + 0.30 - 0.40 2.54 nom. 1.27 nom. 4 5 3 2.54 Possible footprint 0.90 8.20 1 22534 10.80 technical drawings according to DIN specifications 2 Pin no. 1 identification PACKAGE MARKING TCLT1103 V YWW 68 Document Number: 83514 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 22-Sep-11 SO-6L5 VISHAY Vishay Semiconductors SO-6L5 Package Dimensions in mm 15227 Document Number 83246 Rev. 1.1, 10-Dec-03 www.vishay.com 1 SO-6L5 VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 2 Document Number 83246 Rev. 1.1, 10-Dec-03 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1