AERO RF TRANSCEIVERS High-performance products for a full range of cellular applications GSM/GPRS EDGE HSPA TD-HSPA February 2009 www.stericsson.com Aero GPRS transceivers The original Aero transceiver was the first widely accepted RF CMOS solution for GSM/GPRS applications. Aero GPRS transceivers have proven their reliability and stability worldwide in over 600 million handsets. Aero GPRS transceivers deliver world-class performance with low power consumption in the smallest form factor and lowest bill of materials in the industry. The Aero GPRS family was designed for ease-of-use and ease-of-manufacture which enables a faster time-to-market. 4th generation Aero GPRS transceivers are available as either a cost-optimized dual-band solution, the Aero4209, or a quad-band solution that enables worldwide roaming, the Aero4208. Key features * GSM/GPRS/EDGE Rx transceiver * 110 nm RF CMOS * Optimized for either dual-band or quad-band * Universal analog I/Q interface * Digital low-IF receive architecture * Best-in-class sensitivity * Eliminates DC offset and AM detection * Offset-PLL transmitter * Minimizes phase error * Best-in-class modulation spectrum and 20 MHz noise * Industry-leading BOM * Dual-band ~ 12 components * Quad-band ~ 18 components * Fully integrated DCXO * Industry-leading footprint * Dual-band < 1.6 cm2 * Quad-band < 1.8 cm2 key benefits * High integration, smallest transceiver footprint and lowest BOM available today * All sensitive components, Tx/Rx VCOs, loop filters, tuning inductors and varactors completely incorporated on a single IC * Digitally-controlled crystal oscillator (DCXO) on chip (no need for costly VCTCXO) * Industry-leading power consumption * High performance enables use of low-cost passive components * LNA swap feature enables a single PCB design to support multiple dual-band combinations (Aero4209) * Proven in over 600 million handsets world-wide TARGETED APPLICATIONS * Multi-band GSM/GPRS/EDGE Rx digital cellular handsets * Multi-band GSM/GPRS/EDGE Rx wireless data modems Number of bands Sensitivity (dBm) Phase error (rms) 400 kHz spectrum (dBc) 20 MHz noise (dBm/Hz) Package Aero4208 4 -110 2 -66 -165 32-pin QFN 5 x 5 mm Aero4209 2 -110 2 -66 -165 25-pin QFN 5 x 5 mm Part number 7[he*(&. 6ciZccVhl^iX] .%% &-%% &.%% AC6 G;>: AC6 G;>9 AC6 G;>E AC6 E<6 E<6 > 698 F 698 &-%% &.%% E<6 Adl">; %$.% -*% .%% E<6 9^\^iVa [^aiZg :_]_jWb 9:I G;DA > F 7VhZWVcY G;>6 6cVad\^ciZg[VXZ -*% E6 G;D= K8D [gZfjZcXn hnci]Zh^oZg MDJI 98MD MI6A& 6;8 MI6A' Aero4208 block diagram :kWbI7M(_d' 7[he*(&/ 6ciZccVhl^iX] &-%% G;>= &.%% AC6 E<6 E<6 AC6 > 698 &-%% &.%% G;DA 9^\^iVa [^aiZg F 698 E<6 Adl">; %$.% -*% .%% E<6 :_]_jWb 9:I F E6 G;D= K8D [gZfjZcXn hnci]Zh^oZg MDJI 98MD MI6A& Aero4209 block diagram > MI6A' 7VhZWVcY G;>A .%% 6cVad\^ciZg[VXZ -*% Aero EDGE transceivers The Aero EDGE family of transceivers extends Aero's market-leading performance into applications requiring an EDGE air interface. Aero EDGE transceivers have proven their reliability and stability worldwide in almost 100 million handsets. Aero EDGE transceivers deliver world-class performance with low power consumption in the smallest form factor and lowest bill of materials in the industry. The novel dual transmit architecture of the Aero EDGE enables 8PSK transmit modulation without degrading performance in GMSK mode. The Aero EDGE family was designed for ease-of-use and ease-of-manufacture which enables a faster time-to-market. The third generation of Aero EDGE transceivers is available with either an analog I/Q baseband interface, the Aero4223, or an industry-standard DigRF interface, the Aero4213. Key features * GSM/GPRS/EDGE transceiver * 110 nm RF CMOS * Universal analog I/Q or industry-standard DigRF interface * Digital low-IF receive architecture * Best-in-class sensitivity * Eliminates DC offset and AM detection * Dual transmit architecture * Minimizes phase error * Best-in-class modulation spectrum and 20 MHz noise * Optimized for low EVM * Industry-leading BOM * Aero4223 ~ 14 components * Aero4213 ~ 18 components * Fully integrated DCXO with 13/26 MHz output clocks * Industry-leading footprint * Aero4223 < 1.5 cm2 * Aero4213 < 1.9 cm2 * Single-ended 50 outputs key benefits * High integration, smallest transceiver footprint and lowest BOM available today * All sensitive components, Tx/Rx VCOs, loop filters, tuning inductors and varactors completely incorporated on a single IC * Dual transmit architecture minimizes manufacturing calibration * Broadly compatible with linear EDGE PAs on the market * Digitally-controlled crystal oscillator (DCXO) on chip (no need for costly VCTCXO) * Industry-leading power consumption * High performance enables use of low-cost passive components * Proven in almost 100 million handsets worldwide TARGETED APPLICATIONS * Multi-band GSM/GPRS/EDGE digital cellular handsets * Multi-band GSM/GPRS/EDGE wireless data modems Part number Baseband interface Sensitivity (dBm) Phase error (rms) 400 kHz spectrum (dBc) EVM-RMS (%) 20 MHz noise (dBm/Hz) Package Aero4223 Analog I/Q -110 2 -66 3 -165 49-ball LFBGA 4 x 4 mm Aero4213 DigRF -110 2 -66 3 -165 44-pin LGA 6 x 7 mm &-%% G;>: AC6 G;>9 AC6 G;>E AC6 6ciZccVhl^iX] &.%% AC6 7[he*(() E<6 E<6 > 698 E<6 9^\^iVa [^aiZg F 698 > E<6 Adl">; %$.% 9:I &-%% &.%% G;DA G6BE>C BJM 6 7VhZWVcY^ciZg[VXZ -*% 9K<6 6K<6 9K<6 6K<6 E6 G;D= G6BEDJI E6 Xdcigda K8D [gZfjZcXn hnci]Zh^oZg HNH8A@ 98MD HNH8A@:C 6JM8A@ MI6A& MI6A' 6JM8A@:C Aero4223 block diagram &-%% G;>: AC6 G;>9 AC6 G;>E AC6 6ciZccVhl^iX] &.%% AC6 7[he*(') E<6 E<6 > 698 E<6 9^\^iVa [^aiZg F 698 E<6 Adl">; %$.% 9:I &-%% &.%% G;DA 9K<6 6K<6 > 968 9K<6 6K<6 F 968 K8D [gZfjZcXn hnci]Zh^oZg 98MD E6 G;D= E6 ;: G6BE Xdcigda Xdcigda GMIM:C HIGD7: BJM 6 9^\G;^ciZg[VXZ -*%